 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
E15XQA-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 GLYN GmbH & Co. KG | ADAMCABLE15216POL | Glyn | FFC for ADAM Displays 16pol | 124 | ||
 ECCO | CE-15-MAROON-4500 | StockCap |
| 9,000 | ||
 Pasternack Enterprises US | PE15A1005 | Pasternack Enterprises | Key Specifications, Gain: 40 dB, Power Output: 15 dBm P1dB, Frequency, Min: 1.2 GHz, Frequency, Max: 1.4 GHz, Noise Figure, Max: 1.5 dB, Design: High Gain, Voltage, DC Max: 13.2 Volts, Current, DC Max: 250 mA, Connector Series: SMA. 40 dB Gain, 1.5 dB NF, 15 dBm P1dB, 1.2 GHz to 1.4 GHz, Low Noise High Gain Amplifier SMA. PE15A1005 high gain amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized high gain amplifier uses SMA connectors at 50 Ohm. This SMA high gain amplifier has a minimum frequency of 1.2 GHz and maximum frequency of 1.4 GHz. The significantly low noise figure of this radio frequency amplifier is 1.5 dB. High gain LNA amplifier PE15A1005 is rated at 13.2 Volts DC maximum and 250 mA. Our high gain radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave high gain amplifier can ship worldwide the same day of the purchase as with our other available RF parts. |
| 30 | |
| PE15A1009 | Pasternack Enterprises | Key Specifications, Gain: 34 dB, Power Output: 11 dBm P1dB, Frequency, Min: 10 MHz, Frequency, Max: 3 GHz, Noise Figure, Max: 1.7 dB, Design: Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 105 mA, Connector Series: SMA. 25 dBm IP3, 1.4 dB NF, 11 dBm P1dB, 10 MHz to 3 GHz, Low Noise Amplifier, 34 dB Gain, SMA. PE15A1009 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 10 MHz and maximum frequency of 3 GHz. The significantly low noise figure of this radio frequency amplifier is 1.7 dB with a typical gain of 34 dB. LNA amplifier PE15A1009 is rated at 15 Volts DC maximum and 105 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. |
| 16 | ||
| PE1521 | Pasternack Enterprises | Key Specifications, Power Output: 15 dBm P1dB, Frequency, Min: 2 GHz, Frequency, Max: 6 GHz, Gain: 26 dB, Noise Figure, Max: 3 dB, RF Input VSWR, Max: 2, Voltage, DC Max: 12 Volts, Connector Series: SMA. 30 mW, 2 GHz to 6 GHz, Gain Block Amplifier, 26 dB Gain, 3 dB NF, SMA. PE1521 RF gain block amplifier from Pasternack is featured in our extensive in-stock RF amplifier selection. Our connectorized gain block RF amplifier uses SMA connectors. This SMA gain block amplifier has a minimum frequency of 2 GHz, a maximum frequency of 6 GHz and a typical gain of 26 dB. Our radio frequency gain block amp PE1521 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial gain block amplifier can ship worldwide the same day of the purchase as with our other available RF parts. |
| 11 | ||
| PE15A63009 | Pasternack Enterprises | Key Specifications, Gain: 40 dB, Power Output: 10 dBm P1dB, Frequency, Min: 2.6 GHz, Frequency, Max: 3.1 GHz, Noise Figure, Max: 1.6 dB, Design: Input Protected Low Noise, Connector Series: SMA. 1.2 dB NF Input Protected Low Noise Amplifier, Operating from 2.6 GHz to 3.1 GHz with 40 dB Gain, 10 dBm P1dB and SMA. PE15A63009 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 2.6 GHz and maximum frequency of 3.1 GHz. The significantly low noise figure of this radio frequency amplifier is 1.6 dB with a typical gain of 40 dB. input protected LNA amplifier PE15A63009 is rated at Volts DC maximum and mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. |
| 10 | ||
| PE15A1003 | Pasternack Enterprises | Key Specifications, Gain: 38 dB, Power Output: 13 dBm Psat, Frequency, Min: 8 GHz, Frequency, Max: 12 GHz, Design: Low Noise, Voltage, DC Max: 13 Volts, Current, DC Max: 250 mA, Connector Series: SMA. 2.2 dB NF, 13 dBm Psat, 8 GHz to 12 GHz, Low Noise Amplifier, 38 dB Gain, SMA. PE15A1003 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 8 GHz and maximum frequency of 12 GHz. LNA amplifier PE15A1003 is rated at 13 Volts DC maximum and 250 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. |
| 9 | ||
| PE1525 | Pasternack Enterprises | Key Specifications, Power Output: 15 dBm P1dB, Frequency, Min: 200 MHz, Frequency, Max: 2.5 GHz, Gain: 22 dB, Noise Figure, Max: 6 dB, Voltage, DC Min: 9 Volts, Voltage, DC Max: 15 Volts, Connector Series: SMA. 15 dBm P1dB, 200 MHz to 2.5 GHz, Gain Block Amplifier, 19 dB Gain, 6 dB NF, SMA. PE1525 RF gain block amplifier from Pasternack is featured in our extensive in-stock RF amplifier selection. Our connectorized gain block RF amplifier uses SMA connectors. This SMA gain block amplifier has a minimum frequency of 200 MHz, a maximum frequency of 2.5 GHz and a typical gain of 22 dB. Our radio frequency gain block amp PE1525 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial gain block amplifier can ship worldwide the same day of the purchase as with our other available RF parts. |
| 9 | ||
| PE15A1085 | Pasternack Enterprises | Key Specifications, Gain: 50 dB, Power Output: 19 dBm P1dB, Frequency, Min: 50 MHz, Frequency, Max: 8 GHz, Noise Figure, Max: 3 dB, Design: Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 290 mA, Connector Series: SMA. 2.0 dB NF Low Noise Amplifier, Operating from 50 MHz to 8 GHz with 50 dB Gain, 19 dBm P1dB and SMA. The PE15A1085 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This DC powered low noise amplifier has a female gender configuration for input and output ports. This SMA low noise amplifier has a minimum frequency of 50 MHz and maximum frequency of 8 GHz. The PE15A1085 low noise amplifier has 1.9:1 of typical VSWR (Voltage Standing Wave Ratio). This radio frequency amplifier has impressive typical performance that includes a very low noise figure of 2 dB, small signal gain of 50 dB, and gain flatness of 2 dB. Our 007 ADCC powered low noise amplifier is designed to operate on a 9/15 VDC voltage. The PE15A1085 007 low noise amplifier operates over the temperature range of -40 deg C and 85 deg C. This low noise amplifier has 19 dB of typical 1dB compression power and a maximum RF input power of -10 dBm. The Pasternack low noise amplifier features 240 mA typical DC current. Additional specs for this low noise amplifier can be found on its PDF specification datasheet and CAD drawings above. Our DC powered low noise radio frequency amplifier is part of over 40,000 RF, microwave, and millimeter wave components available from Pasternack. This coaxial low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect 007 DC powered low noise amplifier for your requirement. |
| 1 | ||
| PE15A7007 | Pasternack Enterprises |
| 1 | |||
| PE15A5032 | Pasternack Enterprises | Key Specifications, Frequency, Min: 500 MHz, Frequency, Max: 3 GHz, Gain, Min: 48 dB, 3rd Intercept Point, Typ: 52 dB, Voltage, DC Typ: 36 Volts, Voltage, DC Max: 42 Volts. 48 dB Gain, 50 Watt Psat, 500 MHz to 3 GHz, High Power GaN Amplifier, SMA Input, SMA Output, 52 dBm IP3, Class AB. RF solid state power amplifier (SSPA) PE15A5032 from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a high power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 50 Watts. Pasternack solid state power amplifier part number PE15A5032 SMA high power amp has a 48 dB minimum gain. The high power high gain amp is rated with a Psat of 47 dBm. Our radio frequency high power solid state amplifier is constructed for minimum frequency of 500 MHz and a maximum frequency of 3 GHz. Additional radio frequency specs on this high frequency high gain high power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our high power high gain HF amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This high power 50 Watt radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs. |
| 1 | ||
| PE15A1087 | Pasternack Enterprises | Key Specifications, Gain: 59 dB, Power Output: 18 dBm P1dB, Frequency, Min: 20 MHz, Frequency, Max: 6 GHz, Noise Figure, Max: 3 dB, Design: Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 300 mA, Connector Series: SMA. 2.0 dB NF Low Noise Amplifier, Operating from 20 MHz to 6 GHz with 59 dB Gain, 18 dBm P1dB and SMA. The PE15A1087 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This DC powered low noise amplifier has a female gender configuration for input and output ports. This SMA low noise amplifier has a minimum frequency of 20 MHz and maximum frequency of 6 GHz. The PE15A1087 low noise amplifier has 1.5:1 of typical VSWR (Voltage Standing Wave Ratio). This radio frequency amplifier has impressive typical performance that includes a very low noise figure of 2 dB, small signal gain of 59 dB, and gain flatness of 2 dB. Our 007 ADCC powered low noise amplifier is designed to operate on a 9/15 VDC voltage. The PE15A1087 007 low noise amplifier operates over the temperature range of -40 deg C and 85 deg C. This low noise amplifier has 18 dB of typical 1dB compression power and a maximum RF input power of -3 dBm. The Pasternack low noise amplifier features 250 mA typical DC current. Additional specs for this low noise amplifier can be found on its PDF specification datasheet and CAD drawings above. Our DC powered low noise radio frequency amplifier is part of over 40,000 RF, microwave, and millimeter wave components available from Pasternack. This coaxial low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect 007 DC powered low noise amplifier for your requirement. |
| 1 | ||
| PE15A63003 | Pasternack Enterprises | Key Specifications, Gain: 29 dB, Power Output: 23 dBm P1dB, Frequency, Min: 30 MHz, Frequency, Max: 1.5 GHz, Noise Figure, Max: 2 dB, Design: Input Protected Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 190 mA, Connector Series: SMA. 1.6 dB NF Input Protected Low Noise Amplifier, Operating from 30 MHz to 1.5 GHz with 29 dB Gain, 23 dBm P1dB and SMA. PE15A63003 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 30 MHz and maximum frequency of 1.5 GHz. The significantly low noise figure of this radio frequency amplifier is 2 dB with a typical gain of 29 dB. input protected LNA amplifier PE15A63003 is rated at 15 Volts DC maximum and 190 mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. |
| 0 | ||
| PE15A1054 | Pasternack Enterprises | Key Specifications, Gain: 35 dB, Power Output: 20 dBm P1dB, Frequency, Min: 10 MHz, Frequency, Max: 1.3 GHz, Noise Figure, Max: 2 dB, Design: Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 180 mA, Connector Series: SMA. 1.5 dB NF Low Noise Amplifier, Operating from 10 MHz to 1.3 GHz with 35 dB Gain, 20 dBm P1dB and SMA. PE15A1054 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 10 MHz and maximum frequency of 1.3 GHz. The significantly low noise figure of this radio frequency amplifier is 2 dB with a typical gain of 35 dB. LNA amplifier PE15A1054 is rated at 15 Volts DC maximum and 180 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. |
| 0 | ||
| PE15A4015 | Pasternack Enterprises | Key Specifications, Frequency, Min: 8 GHz, Frequency, Max: 11 GHz, Gain, Min: 24 dB, Gain, Typical: 28 dB, Voltage, DC Max: 6 Volts, Current, DC Typ: 200 mA. 4 Watt Psat, 8 GHz to 11 GHz, High Power GaAs Amplifier, SMA Input, SMA Output, 28 dB Gain. RF solid state power amplifier (SSPA) PE15A4015 from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a high power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 4 Watts. Pasternack solid state power amplifier part number PE15A4015 SMA high power amp has a 24 dB minimum gain and 28 dB typical gain. The high power medium gain amp is rated with a Psat of 36 dBm. Our radio frequency high power solid state amplifier is constructed for minimum frequency of 8 GHz and a maximum frequency of 11 GHz. Additional radio frequency specs on this high frequency medium gain high power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our high power medium gain HF amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This high power 4 Watt radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs. |
| 0 | ||
| PE15A5038F | Pasternack Enterprises | Key Specifications, Frequency, Min: 2 GHz, Frequency, Max: 4 GHz, Gain, Min: 39 dB, 1dB Compression Point, Min: 37.8 dBm, 3rd Intercept Point, Typ: 48 dB, Voltage, DC Typ: 13 Volts, Current, DC Typ: 5,500 mA. 8 Watt Psat, 2 GHz to 4 GHz, High Power GaAs Amplifier, SMA Input, SMA Output, 39 dB Gain, 48 dBm IP3, Class A/AB. RF solid state power amplifier (SSPA) PE15A5038F from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a high power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 8 Watts. Pasternack solid state power amplifier part number PE15A5038F SMA high power amp has a 39 dB minimum gain. The high power medium gain amp is rated with a Psat of 39 dBm. Our radio frequency high power solid state amplifier is constructed for minimum frequency of 2 GHz and a maximum frequency of 4 GHz. Additional radio frequency specs on this high frequency medium gain high power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our high power medium gain HF amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This high power 8 Watt radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs. |
| 0 | ||
| PE15A1050 | Pasternack Enterprises | Key Specifications, Gain: 18 dB, Power Output: 16 dBm P1dB, Frequency, Min: 50 MHz, Frequency, Max: 1 GHz, Noise Figure, Max: 1.2 dB, Design: Low Noise, Voltage, DC Max: 18 Volts, Current, DC Max: 80 mA, Connector Series: SMA. 1 dB NF Low Noise Amplifier, Operating from 50 MHz to 1 GHz with 18 dB Gain, 16 dBm P1dB and SMA. PE15A1050 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 50 MHz and maximum frequency of 1 GHz. The significantly low noise figure of this radio frequency amplifier is 1.2 dB with a typical gain of 18 dB. LNA amplifier PE15A1050 is rated at 18 Volts DC maximum and 80 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. |
| 0 | ||
 Venkel Ltd. | MELFC0102-RE-1541CT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�25PPM;1.54K;�0.25% RoHS : Compliant | 0 | ||
| MELFC0102-UE-1541FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�25PPM;1.54K;�1% RoHS : Compliant | 0 | |||
| MELFC0102-YE-1503FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/3W;�25PPM;150K;�1% RoHS : Compliant | 0 | |||
| MELFC0204-TE-1581FT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�25PPM;1.58K;�1% RoHS : Compliant | 0 | |||
| MELFC0204-TE-15R8CT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�25PPM;15.8R;�0.25% RoHS : Compliant | 0 | |||
| MELFC0204-ZE-1581DT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�25PPM;1.58K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0207-VE-1500FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�25PPM;150R;�1% RoHS : Compliant | 0 | |||
| MELFC0207-VE-1582FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�25PPM;15.8K;�1% RoHS : Compliant | 0 | |||
| MELFM0204-TE-1580CT | VENKEL LTD | MELF Molded Thin Film CR;0204;1/4W;�25PPM;158R;�0.25% RoHS : Not Compliant | 0 | |||
| MELFM0207-VE-1581CT | VENKEL LTD | MELF Molded Thin Film CR;0207;1/2W;�25PPM;1.58K;�0.25% RoHS : Not Compliant | 0 | |||
| MELFM0207-XE-1500BT | VENKEL LTD | MELF Molded Thin Film CR;0207;1W;�25PPM;150R;�0.1% RoHS : Not Compliant | 0 | |||
| MELFM0207-XE-1582BT | VENKEL LTD | MELF Molded Thin Film CR;0207;1W;�25PPM;15.8K;�0.1% RoHS : Not Compliant | 0 | |||
| MELFM0207-XE-15R4DT | VENKEL LTD | MELF Molded Thin Film CR;0207;1W;�25PPM;15.4R;�0.5% RoHS : Not Compliant | 0 | |||
| UPTF0603-16W-E-1502AT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�25PPM;15K;�0.05% RoHS : Compliant | 0 | |||
| UPTF0603-16W-E-1503AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�25PPM;150K ;�0.05% RoHS : Compliant | 0 | |||
 Waytek, Inc. | STK2E1-53 | Carling Technologies | Carling Technologies STK2E1-53 sealed metal toggle switch is a DPDT On-Off-(On) switch rated 16A for 12/24VDC systems. It features sealed metal construction, 1000VDC dielectric strength, IP68 sealing performance, and a -40F to 185F operating range. |
| 66 | |
| STA1E1-53 | Carling Technologies | Carling Technologies STA1E1-53 sealed metal toggle switch is an SPST On-Off switch rated 16A for 12-24VDC applications. It features (2) 1/4" blade terminals, IP68 sealing performance, 1000VDC dielectric strength, and a -40F to 185F operating range. |
| 64 | ||
 Wuhan P&S | P6KE150A | Littelfuse Inc | 128V,600W,Uni-directional TVS Diode RoHS : Not Compliant |
| 12,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand