 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
E75ZPD-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 DigiKey | T495B106M010ATE750 | KEMET Corporation | CAP TANT 10UF 20% 10V 1411 RoHS : Compliant |
| 4,005 | |
| T495B106M010ATE750 | KEMET Corporation | CAP TANT 10UF 20% 10V 1411 RoHS : Compliant |
| 4,005 | ||
| T495B106M010ATE750 | KEMET Corporation | CAP TANT 10UF 20% 10V 1411 RoHS : Compliant |
| 4,005 | ||
| E75 | Thomas & Betts | NONINS BS RNG TERM NO6 AWG 1/2 B RoHS : Compliant |
| 600 | ||
| 10E75-230 | Acopian Power Supplies | AC/DC CONVERTER 10V |
| 500 | ||
| AMMLPEBVJE-75.0000 | Abracon Corporation | Oscillator 3225 4-SMD 75MHz 20pp |
| 100 | ||
| 805-132-02Z121-19DE-75 | JRH ELECTRONICS | Triple-Start Mighty Mouse Circul |
| 96 | ||
| 805-132-02ZL12-2CE-75 | JRH ELECTRONICS | Triple-Start Mighty Mouse Circul |
| 94 | ||
| 805-130-03Z115-3CE-75 | JRH ELECTRONICS | Triple-Start Mighty Mouse Circul |
| 92 | ||
| 805-130-02Z123-22DE-75 | JRH ELECTRONICS | Triple-Start Mighty Mouse Circul |
| 92 | ||
| 805-130-03Z119-7CE-75 | JRH ELECTRONICS | Triple-Start Mighty Mouse Circul |
| 90 | ||
| 805-132-02Z115-2CE-75 | JRH ELECTRONICS | Triple-Start Mighty Mouse Circul |
| 69 | ||
| 805-132-07ZL18-12CE-75 | JRH ELECTRONICS | Triple-Start Mighty Mouse Circul |
| 58 | ||
| 805-132-07ZL12-5CE-75 | JRH ELECTRONICS | Triple-Start Mighty Mouse Circul |
| 35 | ||
| E75 | Teledyne FLIR | TOOL LASER ADV THERMAL IMAGE | 0 | |||
 Avnet Americas | TLE75004EPDXUMA1 | Infineon Technologies AG | Power Load Distribution Switch IC, Low Side, 4 Channels, 28 V, 470 mA, 1 Ohm, 14 Pins, TSDSO-EP - Tape and Reel (Alt: TLE75004EPDXUMA1) RoHS : Compliant |
| 45,000 | |
| M55342K06B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K06B4E75RS2) RoHS : Not Compliant |
| 26,000 | ||
| D55342K07B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 250 mW, 1206 [3216 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: D55342K07B4E75RS2) RoHS : Not Compliant |
| 10,000 | ||
| M55342K11B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 50 mW, 0402 [1005 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K11B4E75RS2) RoHS : Not Compliant |
| 7,500 | ||
| M55342K06B4E75RS3 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K06B4E75RS3) RoHS : Not Compliant |
| 5,000 | ||
| RNCF1206BTE75K0 | SEI Stackpole Electronics Inc | SMD Chip Resistor, 75 kohm, ? 0.1%, 330 mW, 1206 [3216 Metric], Thin Film, Precision - Tape and Reel (Alt: RNCF1206BTE75K0) RoHS : Compliant |
| 5,000 | ||
| M55342H06B4E75RT5 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342H06B4E75RT5) RoHS : Not Compliant |
| 4,500 | ||
| P6KE7.5CA-E3/54 | Vishay Intertechnologies | Diode TVS Single Bi-Dir 6.4V 600W 2-Pin DO-15 T/R - Tape and Reel (Alt: P6KE7.5CA-E3/54) RoHS : Compliant |
| 4,000 | ||
| 1.5KE7.5A-E3/54 | Vishay Intertechnologies | 1.5KW,7.5V 5%,UNIDIR,AXIAL TVS - Tape and Reel (Alt: 1.5KE7.5A-E3/54) RoHS : Compliant |
| 2,800 | ||
| M55342K06B4E75RS6 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K06B4E75RS6) RoHS : Not Compliant |
| 2,100 | ||
| PAT0603E7502BST1 | Vishay Intertechnologies | SMD Chip Resistor, 75 kohm, ? 0.1%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PAT Series - Tape and Reel (Alt: PAT0603E7502BST1) RoHS : Compliant |
| 2,000 | ||
| D55342K07B4E75RS3 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 250 mW, 1206 [3216 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: D55342K07B4E75RS3) RoHS : Not Compliant |
| 1,000 | ||
| PTN0805E7500BST1 | Vishay Intertechnologies | SMD Chip Resistor, 750 ohm, ? 0.1%, 200 mW, 0805 [2012 Metric], Thin Film, Precision, PTN Series - Tape and Reel (Alt: PTN0805E7500BST1) RoHS : Compliant |
| 1,000 | ||
| PTN0805E7502BBT1 | Vishay Intertechnologies | SMD Chip Resistor, 75 kohm, ? 0.1%, 200 mW, 0805 [2012 Metric], Thin Film, Precision, PTN Series - Tape and Reel (Alt: PTN0805E7502BBT1) RoHS : Not Compliant |
| 1,000 | ||
| M55342K06B4E75RWB | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Waffle Pack (Alt: M55342K06B4E75RWB) RoHS : Not Compliant |
| 400 | ||
 Newark | RT73F1E75KBTH | TE Connectivity | RES, 75K, 0.1%, THICK FILM, 0402; RoHS : Compliant |
| 10,000 | |
| RT73F1E75KBTH | TE Connectivity | RES, 75K, 0.1%, THICK FILM, 0402; RoHS : Compliant |
| 10,000 | ||
| 1.5KE75A | SPC Multicomp | TVS DIODE, 14.6A, 103V, UNIDIRECTIONAL,; RoHS : Compliant |
| 4,735 | ||
| E7512-L-BLUE | SPC Multicomp | FERRULE, 20AWG, 18.5MM, NYLON, BLUE; RoHS : Compliant |
| 1,488 | ||
| 1.5KE75A | Taiwan Semiconductor | TVS DIODE, 1.5KW, 64.1V, UNIDIR, DO-201; RoHS : Compliant |
| 1,017 | ||
| RN73C1E750RBTDF | TE Connectivity | RES, 750R, 0.1%, 0.063W, 0402, THIN FILM; RoHS : Compliant |
| 1,000 | ||
| 1.5KE75A | Littelfuse Inc | TVS DIODE, 1.5KW, 64.1V, UNIDIR, DO-201; RoHS : Compliant |
| 420 | ||
| RN73C1E750RBTDF | TE Connectivity | RES, 750R, 0.1%, 0.063W, 0402, THIN FILM; RoHS : Compliant |
| 203 | ||
| RN73C1E750RBTDF | TE Connectivity | RES, 750R, 0.1%, 0.063W, 0402, THIN FILM; RoHS : Compliant |
| 203 | ||
| PTE7500-21AG-1A100 | Sensata Technologies | PRESSURE TRANSMITTER, GAUGE, 0-100BAR; RoHS : Compliant |
| 17 | ||
| NYTIE-7.5X365-BK | Brady Worldwide Inc | NYLON WIRE AND CABLE TIES; RoHS : Compliant |
| 10 | ||
| FE75 | Weller Hand Tools GmbH | SOLDERING IRON, 80W, 24V; (Alternate Part Number: 037103157461 RoHS : Not Compliant |
| 8 | ||
| 1.5KE75A | SPC Multicomp | TVS DIODE, 103V UNIDIRECTIONAL 64.7V; Available until stocks are exhausted Alternative available RoHS : Compliant |
| 5 | ||
| TE750B22RJ | TE Connectivity | Through Hole Resistor, TE Series, 22 ohm; RoHS : Compliant |
| 5 | ||
| TLE75242ESHDBTOBO1 | Infineon Technologies AG | DAUGHTER BOARD, SPI DRIVE RELAY CONTROL; RoHS : Compliant |
| 4 | ||
 RS | THINWIRE-7.5M | Stadium Group PLC | CABLE ASSEMBLIES - HDMI TO HDMI |
| 5 | |
| AVT03006E75R00JE3 | Vishay Dale | RESISTOR; WIREWOUND; INDUSTRIAL POWER; ADJUSTABLE TUBULAR;30W;7.5OHM;5% |
| 5 | ||
| AE75-30-00-81 | ABB Low Voltage Products and Systems | AE75 3P CONTR 24VDC |
| 4 | ||
| SE75P-CR0 | Panduit Corp | BRAIDED EXPANDABLE SLEEVING, 0.75"DIA., BLACK, POLYETHYLENE, 100 REEL RoHS : Compliant |
| 3 | ||
| FLUKE-754 (3405771) | Fluke Calibration | MULTI-FUNCTION, DOCUMENTING PROCESS CALIBRATOR HART,300V,110MA, IP-52,750 SERIES |
| 3 | ||
| RE757 | STA-KON | RING TERMINAL, BOLT HOLE 1/2",6AWG, BLUE, COPPER, TIN PLATED |
| 2 | ||
| XCSE7532 | Telemechanique Sensors | XCS-E SOLENOID INTERLOCK SWITCH POWER TO LOCK 120 V AC |
| 2 | ||
| SE75PFR-CR0 | Panduit Corp | EXP.SLEEVING,.75"(19.1MM),FLAMERET., RoHS : Compliant |
| 2 | ||
| FLUKE-753 (3977641) | Fluke Calibration | MULTI-FUNCTION, DOCUMENTING PROCESS CALIBRATOR, 300V, 110MA, IP-52, 750 SERIES |
| 2 | ||
| 2763604 (C-UFB- 5DC/E 75) | Phoenix Contact | SURGE SUPPRESSOR, NETWORK, FOR DATA/COMM,20KA, INLINE, BNC FEMALE/MALE TERM, IP20 |
| 2 | ||
| 3125E-75 | American Beauty Tools | HEAVY-DUTY SOLDERING IRON,75 W,1/4 IN. SHANK, RIGHT ANGLE FOR ERGONOMIC COMFORT |
| 1 | ||
| SNAP-FUSE7.5AB (NULL) | Opto 22 | SNAP- 7.5 AMP FAST ACTING MINI FUSE, 25 PACK |
| 1 | ||
| FLUKE-750P00 (4352270) | Fluke Calibration | DIFFERENTIAL PRESSURE MODULE, 0 TO 1 INH2O, 0 TO 2.5 MBAR, 0 TO 0.25 KPA |
| 1 | ||
| FLUKE-750P07 (4352360) | Fluke Calibration | PRESSURE MODULE, 0 TO 500 (0 TO 35 BAR), (0 TO 3500 KPA) |
| 1 | ||
| E75 | STA-KON | NON-INSULATED LARGE BRAZED SEAM RING TERMINAL, 1.49"L X .82"W, BOLT 1/2", #6 |
| 0 | ||
 Microchip Technology Inc | AT30TSE752A-XM8M-T | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-MSOP, MSOP, Projected EOL: 2041-03-23 RoHS : Compliant |
| 43,343 | |
AT30TSE758A-SS8M-T | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-SOIC-N, SOIC, Projected EOL: 2041-06-04 RoHS : Compliant |
| 4,000 | ||
| AT30TSE758A-XM8M-T | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-MSOP, MSOP, Projected EOL: 2040-12-10 RoHS : Compliant |
| 3,145 | ||
| AT30TSE752A-SS8M-T | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-SOIC-N, SOIC, Projected EOL: 2041-03-24 RoHS : Compliant |
| 1,055 | ||
| AT30TSE758A-SS8M-B | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-SOIC-N, SOIC, Projected EOL: 2041-04-18 RoHS : Compliant |
| 1,045 | ||
| MSMCJLCE75A | Microchip Technology Inc | Uni-Directional TVS _ SMCJ (DO-214AB), Projected EOL: 2049-02-05 RoHS : Compliant |
| 538 | ||
| AT30TSE752A-XM8M-B | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-MSOP, MSOP, Projected EOL: 2040-12-01 RoHS : Compliant |
| 82 | ||
| AT30TSE754A-SS8M-B | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-SOIC-N, SOIC, Projected EOL: 2045-12-22 RoHS : Compliant |
| 50 | ||
| MXP6KE75A | Microchip Technology Inc | Uni-Directional TVS _ T-18, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MXL1.5KE75A | Microchip Technology Inc | Uni-Directional TVS _ CASE 1, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MA1.5KE7.5CA | Microchip Technology Inc | Bi-Directional TVS _ CASE 1, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MXSMCGLCE75A | Microchip Technology Inc | Uni-Directional TVS _ SMCG (DO-215AB), Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| M1.5KE7.5CAE3 | Microchip Technology Inc | Bi-Directional TVS _ CASE 1, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MASMCGLCE75AE3 | Microchip Technology Inc | Uni-Directional TVS _ SMCG (DO-215AB), Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| M1.5KE7.5CAE3/TR | Microchip Technology Inc | Bi-Directional TVS _ Plastic (040-200D), Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
 Bisco Industries | YKFAE-75416-GA | PennEngineering (PEM) | 4,668 | |||
| FRBHE-7500-12-B-4 | Howmet Aerospace | 150 | ||||
| E-750 | Bivar Inc | 102 | ||||
| SE-75 | MISC. EYELETS | 45 | ||||
| SE75PFR-DR0 | Panduit Corp | 1 | ||||
| SE75PFR-CR0 | Panduit Corp | RoHS : Compliant | 1 | |||
| IHLE-750-016-3-500-00-00 | Groov-Pin Corporation | 1 | ||||
 Rochester Electronics | P6KE75ARLG | onsemi | Trans Voltage Suppressor Diode, 600W, 64.1V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant |
| 266,507 | |
ADE7518ASTZF16 | Analog Devices Inc | Consumer Circuit, PQFP64 RoHS : Compliant |
| 4,575 | ||
| ADE7518ASTZF8 | Analog Devices Inc | Consumer Circuit, PQFP64 RoHS : Compliant |
| 5,673 | ||
ADE7566ASTZF16 | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant |
| 2,423 | ||
| ADE7566ASTZF16-RL | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant |
| 9,419 | ||
| ADE7566ASTZF8 | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant |
| 6,016 | ||
| ADE7569ASTZF16 | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant |
| 2,529 | ||
P6KE75A | Fairchild Semiconductor Corporation | Trans Voltage Suppressor Diode, 600W, 64.1V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Not Compliant |
| 2,100 | ||
| RGE7501MC | Intel Corporation | Intel E7501 Chipset Memory Controller Hub (MCH) |
| 2,024 | ||
SIT1602AC-12-18E-75.000000G | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 75MHz 1.62V ~ 1.98V ±25ppm 4-SMD T/R RoHS : Compliant |
| 250 | ||
SIT1602AC-82-18E-75.000000X | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 75MHz 1.62V ~ 1.98V ±25ppm 4-SMD T/R RoHS : Compliant |
| 221 | ||
SIT1602BI-32-18E-75.000000T | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 75MHz 1.62V ~ 1.98V ±25ppm 4-SMD T/R RoHS : Compliant |
| 4,000 | ||
| SIT8103AC-82-18E-75.00000T | SiTime Corporation | CRYSTAL OSC XO (Standard) LVCMOS, LVTTL 75MHz 1.71V ~ 1.89V ±25ppm 4-SMD T/R RoHS : Compliant |
| 1,340 | ||
| SIT8103AI-83-33E-75.00000Y | SiTime Corporation | CRYSTAL OSC XO (Standard) LVCMOS, LVTTL 75MHz 2.97V ~ 3.63V ±50ppm 4-SMD T/R RoHS : Compliant |
| 10,000 | ||
| SIT8208AI-G3-33E-75.000000X | SiTime Corporation | CRYSTAL OSC XO (Standard) LVCMOS, LVTTL 75MHz 2.97V ~ 3.63V ±50ppm 4-SMD T/R RoHS : Compliant |
| 250 | ||
 TME | 1.5KE75CA | Diotec Semiconductor AG | Diode: TVS; 75V; 15A; bidirectional; ±5%; Ø5.4x7.5mm; 1.5kW; 1.5KE RoHS : Compliant |
| 1,200 | |
| 1.5KE75CA | Littelfuse Inc | Diode: TVS; 75V; 14.8A; bidirectional; ±5%; DO201; 1.5kW; 1.5KE RoHS : Not Compliant |
| 1,033 | ||
| E752NEO | Eclipse Magnetics | Magnet: permanent; NdFeB; 44N; Ø: 10mm; H: 20mm; brass; bipolar; NEO |
| 177 | ||
| AAE7542-00 | TE Connectivity | AAE7542-00 |
| 22 | ||
| 1.5KE7.5ATA | SMC Diode Solutions | Diode: TVS; 1.5kW; 7.13÷7.88V; 134.5A; unidirectional; DO201AD |
| 0 | ||
| 1.5KE75CA | Continental Device India Ltd | Diode: TVS; 71.3V; 14.8A; bidirectional; DO201AD; 1.5kW; Ammo Pack RoHS : Compliant |
| 0 | ||
| 1.5KE75A AMP | Fagor Electrónica | Diode: TVS; 1.5kW; 75V; unidirectional; DO201AE; 1.5KE; Ammo Pack |
| 0 | ||
| 1.5KE75CA TR | Fagor Electrónica | Diode: TVS; 75V; bidirectional; DO201AE; 1.5kW; 1.5KE; reel |
| 0 | ||
| CRT02J7E7502 | Viking Technology | Resistor: thick film; 75kΩ; 0402; 62.5mW; ±5%; CRT; -55÷155°C; 1A |
| 0 | ||
| CRT0AJ7E7503 | Viking Technology | Resistor: thick film; 750kΩ; 2010; 750mW; ±5%; CRT; -55÷155°C; 2A |
| 0 | ||
| E755NEO | Eclipse Magnetics | Magnet: permanent; NdFeB; 274N; Ø: 20mm; H: 25mm; brass; bipolar; NEO |
| 0 | ||
| CRT02J7E7504 | Viking Technology | Resistor: thick film; 7.5MΩ; 0402; 62.5mW; ±5%; CRT; -55÷155°C; 1A |
| 0 | ||
| FLUKE-750P22 | Fluke Calibration | Module; 0÷70mbar; differential; pressure |
| 0 | ||
| CRT02J7E7503 | Viking Technology | Resistor: thick film; 750kΩ; 0402; 62.5mW; ±5%; CRT; -55÷155°C; 1A |
| 0 | ||
| CRT0AJ7E7504 | Viking Technology | Resistor: thick film; 7.5MΩ; 2010; 750mW; ±5%; CRT; -55÷155°C; 2A |
| 0 | ||
 Ameya Holding Limited | EP4CE75F29I7N | Intel Corporation | IC FPGA 426 I/O 780FBGA RoHS : Compliant | 225 | ||
 ComSIT USA | MMA02040E7500BB300 | Vishay Intertechnologies | AVAILABLE EU RoHS : Compliant | 4,171 | ||
| Q300JXE7511250100T3FULF | Jauch Quartz America | AVAILABLE EU | 8,078 | |||
| TLE75004ELD | NXP Semiconductors | AVAILABLE EU | 3,442 | |||
| Q120JXE7511250100T1LF | Jauch Quartz America | AVAILABLE EU | 34,109 | |||
ComSIT USA | SFH206E7504 | Siemens | SILICON-PIN-PHOTODIODE WITH DAYLIGHT FILTER PIN Photodiode RoHS : Not Compliant | 74,000 | ||
| LHGBT686E7510 | OSRAM GmbH | HYPER-BRIGHT MULTI TOPLED Triple Color LED, Hyper Red/green/blue, Colorless Clear, 2.4mm RoHS : Not Compliant | 12,700 | |||
| SFH309FA5E7500 | OSRAM GmbH | Radial T1 Photo transistor Photo Transistor, 900nm, 0.015A I(C) RoHS : Not Compliant | 11,251 | |||
| P6KE75ARLG | onsemi | 600 WATT PEAK POWER LITTLEFUSE-40 TRANSIENT VOLTAGE SUPPRESSOR Trans Voltage Suppressor Diode, 600W, 64.1V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant | 8,000 | |||
| RTYS03TTE7507 | KOA Speer Electronics Inc | PRECISION VOLTAGE DIVIDER NETWORK Array/Network Resistor, Divider, 100V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount RoHS : Not Compliant | 7,980 | |||
| P6KE75AE354 | Vishay Intertechnologies | TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Trans Voltage Suppressor Diode, 600W, 64.1V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC RoHS : Compliant | 3,820 | |||
| 15KE75AE354 | Vishay Intertechnologies | Trans Voltage Suppressor Diode, 1500W, 6.4V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant | 1,400 | |||
| Q160JXE7511250100T1LF | Jauch Quartz America | Electronic Component RoHS : Compliant | 1,000 | |||
| Q160JXE752125050T1LF | Jauch Quartz America | Electronic Component RoHS : Compliant | 1,000 | |||
| Q250JXE7511250100T1FULF | Jauch Quartz America | Electronic Component RoHS : Compliant | 1,000 | |||
| UE75A206000T | TE Connectivity | SFP 20 POSITION HIGH SPEED CONNECTOR RECEPTACLE FIXED BOARD, RIGHT ANGLE SMT Telecom and Datacom Connector, 20 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle RoHS : Compliant | 500 | |||
| DFN4KB25MXE75 | CTS Corporation | TTL & HCMOS PRECISION OSCILLATOR HCMOS/TTL Output Clock Oscillator, 25MHz Nom RoHS : Compliant | 80 | |||
| E75W12R33 | Deutronic Elektronik GmbH | Electronic Component RoHS : Compliant | 12 | |||
EP4CE75F23I7N | Altera Corporation | CYCLONE IV FPGA DEVICE FAMILY Field Programmable Gate Array, 4713 CLBs, 472.5MHz, 75408-Cell, PBGA484 RoHS : Compliant | 9 | |||
| JGE7501MC | Intel Corporation | Dynamic RAM (DRAM) Tray RoHS : Compliant | 8 | |||
 GLYN GmbH & Co. KG | EP4CE75F23I7N | Altera Corporation | Cyclone-IVE FPGA 484-BGA -40/+85øC RoHS : Compliant | 205 | ||
 Interstate Connecting Components | MS3137E7-50PB | MISC MIL-AERO | CONNECTOR, PLUG, PUSH-PULL COUPLING | 18 | ||
| E751863001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC55/9952-26-1(LAT3) RoHS : Compliant | 0 | |||
| FCE75028B | TE Connectivity | FCE75028B | 0 | |||
| D38999/26ME75SN | SOURIAU-SUNBANK | Stecker, Gr� e 17 RoHS : Compliant | 0 | |||
| AE75-000102 | Conesys | 0 | ||||
| E75893-000 | TE Connectivity | ZCSM-8/3-1000/U RoHS : Compliant | 0 | |||
| EE7527-000 | TE Connectivity | BAH-036010083 | 0 | |||
| E75722-000 | TE Connectivity | FCSM-120/40-1000/S(S5) RoHS : Compliant | 0 | |||
| EE7544-000 | TE Connectivity | BAH-033000085 | 0 | |||
| MWDL-51S-4E7-5B | Glenair Inc | 0 | ||||
| MWDM1L-15S-6E7-50B | Glenair Inc | RoHS : Not Compliant | 0 | |||
| MWDM2L-25P-4E7-5B | Glenair Inc | 0 | ||||
| MWDM2L-51S-4E7-50B | Glenair Inc | 0 | ||||
| E75922-000 | TE Connectivity | EN-CGPT-19/9.5-45-SP | 0 | |||
| EE7542-000 | TE Connectivity | BAH-033000087 | 0 | |||
 NexGen Digital | RK73B3ATTE753J | KOA Speer Electronics Inc | RoHS : Compliant | 4,000 | ||
 PEI Genesis | FFA.1E.750.CNS | LEMO connectors |
| 0 | ||
| R58HB35E75X036 | SOURIAU-SUNBANK |
| 0 | |||
| J2CE7521-20S0A | ITT Interconnect Solutions |
| 0 | |||
| R58HB45E75A160 | SOURIAU-SUNBANK |
| 0 | |||
| 4120-G111-K1M1-A1S0ZE-7.5A | E-T-A |
| 0 | |||
| UE75A205000T | Amphenol Corporation |
| 0 | |||
| FFA.0E.750.CNS | LEMO connectors |
| 0 | |||
| FFA.1E.755.CNS | LEMO connectors |
| 0 | |||
| UE75A202001T | Amphenol Corporation |
| 0 | |||
| R58HB18E75A018 | SOURIAU-SUNBANK |
| 0 | |||
| UE75-A20-6000T | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
 Powell Electronics | E-750 | Bivar Inc | ECON-O-GIDES, Press-In Card Guide, 7.5 i |
| 13,992 | |
| FFA.2E.755.CNS | LEMO connectors | COLLET 2K DIAM 5.1 - 5 |
| 50 | ||
| FFA.1E.755.CNS | LEMO connectors | COLLET 1K DIAM 5.1 - 5 |
| 31 | ||
| MS3424E7-50S | TE Connectivity | MS3424 MIL-DTL-26482 CONNECTOR |
| 30 | ||
| 195E75 | Hammond Manufacturing | CHOKE RoHS : Compliant |
| 16 | ||
| AAE7542-00 | TE Connectivity | backshells, |
| 15 | ||
| FFA.1E.750.CNS | LEMO connectors | COLLET 1K DIAM 4.6 - 5 |
| 14 | ||
 PUI | FSE-750MA | 285 | ||||
 Richardson RFPD | 100E751JMS2500XJ16 | Kyocera AVX Components | Cap Ceramic 750pF 2500V P90 5% Microstrip SMD 3838 RoHS : Compliant | 0 | ||
| 800E750GT7200XJ24 | Kyocera AVX Components | 800E750GT7200XJ24 RoHS : Compliant | 0 | |||
| TFSSE750RJE | Ohmite Mfg Co | Thick Film Resistor RoHS : Compliant |
| 0 | ||
| 100E750JW3600XJ24 | Kyocera AVX Components | Cap Ceramic 75pF 3600V +90±30ppm/C 5% Pad SMD 125C RoHS : Not Compliant | 0 | |||
| E7509LF | Rakon Limited | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| 100E751GTN2500X | Kyocera AVX Components | MULTILYRCERAMIC CAP RoHS : Compliant | 0 | |||
| E7507LF | Rakon Limited | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| 100E750FMN3600X | Kyocera AVX Components | MULTILYRCERAMIC CAP RoHS : Compliant | 0 | |||
| 700E750GAR7200X | Kyocera AVX Components | MULTILYRCERAMIC CAP RoHS : Compliant | 0 | |||
| 10-FY07NMB150S5-LE75F08 | Vincotech | 650 V / 150 A IGBT Module Transistor RoHS : Compliant | 0 | |||
| 800E751GT2500XJ24 | Kyocera AVX Components | CapCeramic 750pF 2500VC0G 2% Pad SMD 3838 125°C RoHS : Compliant | 0 | |||
| MA1.5KE7.5AE3 | Microchip Technology Inc | TVS Diode Single Uni-Dir 6.4V 1.5KW 2-Pin Case 1 B RoHS : Not Compliant | 0 | |||
| TFSSE750RFE | Ohmite Mfg Co | Thick Film Resistor RoHS : Compliant |
| 0 | ||
| 700E750JW7200X | Kyocera AVX Components | MULTILYRCERAMIC CAP RoHS : Not Compliant | 0 | |||
| 100E751GW2500XJ24 | Kyocera AVX Components | SMD Chip General RF Ceramic Capacitor RoHS : Compliant | 0 | |||
 Rutronik | UE75A206000T | Amphenol Communications Solutions | SFP Connector 1x1 RoHS : Compliant |
| 1,000 | |
 Chip 1 Exchange | LYT670-KE7510 | OSRAM GmbH | INSTOCK | 44,229 | ||
| RK73K1E750JD | KOA Speer Electronics Inc | INSTOCK | 9,945 | |||
| LPT670HE7510 | INSTOCK | 7,900 | ||||
| AT30TSE758A-XM8M-T | Atmel Corporation | INSTOCK RoHS : Compliant | 6,500 | |||
| RC1210 4E7 5% | YAGEO Corporation | INSTOCK | 6,422 | |||
| LPT670H1E7510 | INSTOCK | 4,950 | ||||
| P6KE75CA | GS Battery | INSTOCK | 3,030 | |||
1.5KE7.5A_AY_10001 | PanJit Semiconductor | INSTOCK RoHS : Compliant | 1,589 | |||
| 50050*=WE - 750 050 050* | MIDC | INSTOCK | 301 | |||
| NQE7520MC SL7XT | INSTOCK | 79 | ||||
| E-75/120-RACK-LAT/E1-V | INSTOCK | 70 | ||||
| E-75 | Thomas & Betts | INSTOCK | 23 | |||
| EP4CE75F23C6N | Altera Corporation | INSTOCK RoHS : Compliant | 20 | |||
| RGE7501MC SL6NV | Intel Corporation | INSTOCK | 3 | |||
| RGE7501MC SL6NV | INSTOCK | 3 | ||||
 Avnet Abacus | MMA02040E7509BB300 | Vishay Intertechnologies | - Tape and Reel (Alt: MMA02040E7509BB300) RoHS : Compliant | 6,000 | ||
| M55342K06B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor 475 kohm 1 150 mW 0805 2012 Metric Thin Film Established Reliability (Alt: M55342K06B4E75RS2) RoHS : Not Compliant | 1,000 | |||
| UE75A206000T | Amphenol Corporation | Conn SFP RCP SMD 20 POS 08mm Solder RA SMD 20 Terminal 1 Port TR - Tape and Reel (Alt: UE75A206000T) RoHS : Compliant | 500 | |||
| TE750B1K8J | TE Connectivity | Resistor 18 kOhm 5 750 W Wirewound High Power Solder Lug (Alt: 4-1879452-0) RoHS : Compliant | 0 | |||
| P1206E75R0BBW | Vishay Intertechnologies | - Tape and Reel (Alt: P1206E75R0BBW) RoHS : Not Compliant | 0 | |||
| ALV70D820CE750 | KEMET Corporation | Cap Alu 85C 82F 750VDC (Alt: ALV70D820CE750) RoHS : Compliant | 0 | |||
| P-0402E7500BBTS | Vishay Intertechnologies | P0402 25PPM 750 01 B TS (Alt: P-0402E7500BBTS) RoHS : Not Compliant | 0 | |||
| PTN0603E7502BST3 | Vishay Intertechnologies | SMD Chip Resistor 75 kohm 01 150 mW 0603 1608 Metric Thin Film Precision PTN Series - Tape and Reel (Alt: PTN0603E7502BST3) RoHS : Compliant | 0 | |||
| M55342K11B4E75SS3 | Vishay Intertechnologies | SMD Chip Resistor 475 kohm 1 50 mW 0402 1005 Metric Thin Film Established Reliability (Alt: M55342K11B4E75SS3) RoHS : Not Compliant | 0 | |||
| T495B106M010ATE750 | KEMET Corporation | Surface Mount Tantalum Capacitor 10 uF 10 V 1411 3528 Metric 20 750 mohm 337 mA - Tape and Reel (Alt: T495B106M010ATE750) RoHS : Compliant | 0 | |||
| MBB0207VE7502BC100 | Vishay Intertechnologies | - Tape and Reel (Alt: MBB0207VE7502BC100) RoHS : Compliant | 0 | |||
| T495C335K025ATE750 | KEMET Corporation | Surface Mount Tantalum Capacitor 33 uF 25 V 2312 6032 Metric 10 750 mohm 383 mA - Tape and Reel (Alt: T495C335K025ATE750) RoHS : Compliant | 0 | |||
| DCM3623E75X1780T70 | Vicor Power | DCM3623T75X1780T70 Isolated DC to DC Converter Evaluation Board (Alt: DCM3623E75X1780T70) RoHS : Not Compliant | 0 | |||
GQM1875C2E750GB12D | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 75 pF 250 V 0603 1608 Metric 2 C0G NP0 GQM Series (Alt: GQM1875C2E750GB12D) RoHS : Compliant | 0 | |||
| DCM3623E75X3180T00 | Vicor Power | DCM3623T75X3180T00 Isolated DC to DC Converter Evaluation Board (Alt: DCM3623E75X3180T00) RoHS : Not Compliant | 0 | |||
Avnet Asia | GRM0225C1E750GA02D | Murata Manufacturing Co Ltd | MURGRM0225C1E750GA02D CHIP MULTILAYER CE (Alt: GRM0225C1E750GA02D) RoHS : Compliant | 0 | ||
| PHP02512E75R0BST5 | Vishay Intertechnologies | (Alt: PHP02512E75R0BST5) RoHS : Compliant | 0 | |||
| PTN0603E7501BST1 | Vishay Intertechnologies | SMD Chip Resistor, 7.5 kohm, ? 0.1%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PTN Series (Alt: PTN0603E7501BST1) RoHS : Compliant | 0 | |||
| STE750-75T4MI | Vishay Intertechnologies | (Alt: STE750-75T4MI) RoHS : Not Compliant | 0 | |||
| M55342K12B4E75RTSV | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability (Alt: M55342K12B4E75RTSV) RoHS : Not Compliant | 0 | |||
| 1V5KE75CA | Taiwan Semiconductor | Transient Voltage Suppressor Bi-Directional 64.1V 1500W 2-Pin DO-201AE (Alt: 1V5KE75CA) RoHS : Compliant | 0 | |||
TWAE757M075CBEZ0700 | Kyocera AVX Components | (Alt: TWAE757M075CBEZ0700) RoHS : Compliant | 0 | |||
| UE75-A20-3000T | Amphenol Corporation | Pluggable I/O Connector, SFP, 20 Contacts, 1 x 1 (Port), Surface Mount Right Angle, UE75 Series (Alt: UE75-A20-3000T) RoHS : Compliant | 0 | |||
| PHPA2512E75R0BSTS | Vishay Intertechnologies | (Alt: PHPA2512E75R0BSTS) RoHS : Compliant | 0 | |||
| UE75A203000T | Amphenol Corporation | Pluggable I/O Connector, SFP, 20 Contacts, 1 x 1 (Port), Surface Mount Right Angle, UE75 Series (Alt: UE75A203000T) RoHS : Compliant | 0 | |||
| SMDJE75A | Eaton Corporation | Diode TVS Single Uni-Directional 75V 3KW 2-Pin SMC T/R (Alt: SMDJE75A) RoHS : Compliant | 0 | |||
| PCNM1206E75R0BST5 | Vishay Intertechnologies | (Alt: PCNM1206E75R0BST5) RoHS : Compliant | 0 | |||
| M55342K12B4E75RS6 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability (Alt: M55342K12B4E75RS6) RoHS : Not Compliant | 0 | |||
| UE75-A20-6000T | Amphenol Corporation | Conn SFP RCP SMD 20 POS 0.8mm Solder RA SMD 20 Terminal 1 Port T/R (Alt: UE75-A20-6000T) RoHS : Compliant | 0 | |||
| M55342K12B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability (Alt: M55342K12B4E75RS2) RoHS : Not Compliant | 0 | |||
 Avnet Silica | M1.5KE7.5AE3 | Microchip Technology Inc | (Alt: M1.5KE7.5AE3) RoHS : Compliant | 0 | ||
| M1.5KE7.5CAE3 | Microchip Technology Inc | (Alt: M1.5KE7.5CAE3) RoHS : Compliant | 0 | |||
| MX1.5KE7.5CAE3 | Microchip Technology Inc | (Alt: MX1.5KE7.5CAE3) RoHS : Compliant | 0 | |||
| MASMCJLCE7.5AE3 | Microchip Technology Inc | (Alt: MASMCJLCE75AE3) RoHS : Compliant | 0 | |||
| AT30TSE752A-XM8M-T | Microchip Technology Inc | (Alt: AT30TSE752A-XM8M-T) RoHS : Compliant | 0 | |||
| P6KE75A _AY _10001 | PanJit Semiconductor | (Alt: P6KE75A_AY_10001) RoHS : Compliant | 0 | |||
| AT30TSE758A-XM8M-T | Microchip Technology Inc | (Alt: AT30TSE758A-XM8M-T) RoHS : Compliant | 0 | |||
| AT30TSE758A-SS8M-T | Microchip Technology Inc | (Alt: AT30TSE758A-SS8M-T) RoHS : Compliant | 0 | |||
| AT30TSE758A-XM8M-B | Microchip Technology Inc | (Alt: AT30TSE758A-XM8M-B) RoHS : Compliant | 0 | |||
| AT30TSE752A-SS8M-T | Microchip Technology Inc | (Alt: AT30TSE752A-SS8M-T) RoHS : Compliant | 0 | |||
| AT30TSE754A-SS8M-B | Microchip Technology Inc | (Alt: AT30TSE754A-SS8M-B) RoHS : Compliant | 0 | |||
| P6KE7.5CA _AY _10001 | PanJit Semiconductor | (Alt: P6KE7.5CA_AY_10001) RoHS : Compliant | 0 | |||
| 1.5KE7.5CA _AY _10001 | PanJit Semiconductor | (Alt: 1.5KE7.5CA_AY_10001) RoHS : Compliant | 0 | |||
| 1.5KE7.5CA_ R2 _10001 | PanJit Semiconductor | (Alt: 1.5KE7.5CA_R2_10001) RoHS : Compliant | 0 | |||
| SIT8008BI-82-33E-75.000000T | SiTime Corporation | (Alt: SIT8008BI-82-33E-75.000000T) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | ASE7-50.000MHZ-LC-T | Abracon Corporation |
| 0 | ||
| ANLTE7-50HRA | Multi-Tech Systems Inc | LTE Antenna, 7.75" (2 dBi). 50-pack |
| 0 | ||
| ASE7-50.000MHZ-LR-T | Abracon Corporation |
| 0 | |||
 Chip-Germany GmbH | UE75-A20-2000T | Amphenol Corporation | RoHS : Compliant | 26 | ||
 Component Electronics, Inc | RK73H2BTE7501F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 6,400 | |
| RM73B3ATE752J | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant | 3,979 | |||
| RK73B3ALTE752J | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant | 3,792 | |||
| P6KE7.5CA/1 | GS Battery | IN STOCK SHIP TODAY |
| 950 | ||
| 1.5KE7.5A | Vishay Semiconductors | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 802 | ||
| 1.5KE75A-E3/54 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 770 | ||
| MBB0207-15-0.1%-PE-75R5 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 225 | ||
| 1.5KE7.5CA | General Instrument | IN STOCK SHIP TODAY |
| 179 | ||
| 1.5KE7.5CA | Littelfuse Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 96 | ||
| P6KE7.5CA | World Products Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 85 | ||
| 1.5KE75A | General Instrument | IN STOCK SHIP TODAY |
| 50 | ||
| 1.5KE7.5A | General Instrument | IN STOCK SHIP TODAY |
| 50 | ||
| P6KE7.5CA | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 47 | ||
| RE75G5R00 | Ohmite Mfg Co | IN STOCK SHIP TODAY |
| 22 | ||
| 1.5KE7.5A | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 11 | ||
 DB Roberts | E-750 | Bivar Inc | ECON-O-GIDES, PRESS-IN CARD GUIDE, 7.5 IN. LENGTH, 0.078 |
| 73 | |
| SLCSE-750-3-01 | Essentra Components | Wire SdlSpacerNatural3/16 in Spc Wire Saddle Spacer Natural | 0 | |||
| SLCSE-750-4-01 | Essentra Components | 0 | ||||
 EBV Elektronik | BXE75T60HFHD | Bridgelux Inc | Transistor IGBT NCH 600V 150A 3Pin TO247 Tube (Alt: BXE75T60HFHD) RoHS : Compliant | 1,000 | ||
| 1V5KE75A | Taiwan Semiconductor | Transient Voltage Suppressor UniDirectional 641V 1500W 2Pin DO201AE (Alt: 1V5KE75A) RoHS : Compliant | 0 | |||
| P6KE7.5CA | Taiwan Semiconductor | Diode TVS Single BiDirectional 641V 600W 2Pin DO15 (Alt: P6KE7.5CA) RoHS : Compliant | 0 | |||
| 1V5KE75CA | Taiwan Semiconductor | Transient Voltage Suppressor BiDirectional 641V 1500W 2Pin DO201AE (Alt: 1V5KE75CA) RoHS : Compliant | 0 | |||
| 1.5KE75A-E3/54 | Vishay Intertechnologies | 15KW75V 5UNIDIRAXIAL TVS (Alt: 1.5KE75A-E3/54) RoHS : Compliant | 0 | |||
| P6KE7.5A-E3/54 | Vishay Intertechnologies | Diode TVS Single UniDir 64V 600W 2Pin DO15 TR (Alt: P6KE7.5A-E3/54) RoHS : Compliant | 0 | |||
| 1.5KE75CA-E3/54 | Vishay Intertechnologies | (Alt: 1.5KE75CA-E3/54) RoHS : Compliant | 0 | |||
| P6KE7.5CA-E3/54 | Vishay Intertechnologies | Diode TVS Single BiDir 64V 600W 2Pin DO15 TR (Alt: P6KE7.5CA-E3/54) RoHS : Compliant | 0 | |||
| 1.5KE7.5A-E3/54 | Vishay Intertechnologies | 15KW75V 5UNIDIRAXIAL TVS (Alt: 1.5KE7.5A-E3/54) RoHS : Compliant | 0 | |||
| 1.5KE7.5CA-E3/54 | Vishay Intertechnologies | 15KW75V 5BIDIRAXIAL TVS (Alt: 1.5KE7.5CA-E3/54) RoHS : Compliant | 0 | |||
| AT30TSE752A-XM8M-T | Microchip Technology Inc | (Alt: AT30TSE752A-XM8M-T) RoHS : Compliant | 0 | |||
| AT30TSE758A-XM8M-T | Microchip Technology Inc | (Alt: AT30TSE758A-XM8M-T) RoHS : Compliant | 0 | |||
| AT30TSE758A-SS8M-T | Microchip Technology Inc | (Alt: AT30TSE758A-SS8M-T) RoHS : Compliant | 0 | |||
| AT30TSE758A-XM8M-B | Microchip Technology Inc | (Alt: AT30TSE758A-XM8M-B) RoHS : Compliant | 0 | |||
| AT30TSE752A-SS8M-T | Microchip Technology Inc | (Alt: AT30TSE752A-SS8M-T) RoHS : Compliant | 0 | |||
 FDH Electronics | MS3147E7-50S | TE Connectivity | Circular Conn | 99 | ||
| MS3446E7-50P | TE Connectivity | Placeholder | 10 | |||
| 3/8 ALUMINUM PLATE.75"X48 | FDH Electronics | Machine Tooling | 6 | |||
| RE75G1R00 | TTI, Inc | Other Products | 5 | |||
| R58HB18E75A018 | SOURIAU-SUNBANK | Backshells & Ac | 4 | |||
| HAR AVE75537 | FDH Electronics | Wire Placehldr | 3 | |||
| PE75903 | Connector Technology Inc | Cable Assembly |
| 1 | ||
| MWDM1L-15S-6E7-50B | Glenair Inc | Connector MIL M RoHS : Not Compliant | 0 | |||
| MWDM2L-37S-6E7-54S | Glenair Inc | Connector MIL M | 0 | |||
| MWDM2L-100P-8E7-5B | Glenair Inc | Connector MIL M RoHS : Compliant | 0 | |||
| MWDM1L-25S-8E7-5P | Glenair Inc | Connector MIL M RoHS : Not Compliant | 0 | |||
| MS3320-E7.5V | Crouzet | Circuit Breaker | 0 | |||
| R58HB18E75A018 | Cooper Interconnect | Backshells & Ac | 0 | |||
| MWDM1L-100P-8E7-5P | Glenair Inc | Connector MIL M RoHS : Not Compliant | 0 | |||
| MWDM1L-15S-8E7-5P | Glenair Inc | Connector MIL M RoHS : Not Compliant | 0 | |||
 Maritex | 1.5KE7.5CA | Cyg Wayon Circuit Protection Co Ltd | Transil Diode (TVS); 1500W; 6.4V; 134.5A; bidirectional; -55+175 deg.C; THT; DO201AD |
| 3,266 | |
 Master Electronics | 1.5KE7.5CATR | SynSemi Inc | Transient Voltage Suppressor - Bi-directional - 1.5kW - 7.5Vbr. RoHS : Compliant |
| 3,570 | |
| RE757 | Thomas & Betts | Sta-Con® Nylon-Insulated Large Ring Terminal - Wire Size #6AWG - Material Copper - Tin-Plated Finish - Color Blue - Bolt Hole 1/2 Inch - Voltage Rated 600V RoHS : Compliant |
| 376 | ||
| E75 | Thomas & Betts | Ring Tongue Terminal 6AWG Electrolytic Copper 37.84mm Electro Tin RoHS : Compliant |
| 125 | ||
| SE75P-DR0 | Panduit Corp | Braided Expandable Sleeving 0.75 diameter (19.1mm) provides continuous abrasion resistance for wires cables and tubing. The highly flexible open weave will not trap heat or humidity black Polyethylene Terephthalate 500 ft. per reel. RoHS : Compliant |
| 2 | ||
| E750WB | Sola/Hevi-Duty | E750+FBPC1+FB2X FACTORY WI RoHS : Compliant |
| 0 | ||
| 1-YW-EXT-E75 | Teledyne FLIR | FLIR E75 EXTENDED WARRANTY RoHS : Compliant |
| 0 | ||
| TE750B1K8J | TE Connectivity | TE 750W 1K8 5% Bracket Tubular Resistors Fixed Resistor RoHS : Compliant |
| 0 | ||
| MASMCGLCE75AE3 | Microchip Technology Inc | Low Cap TVS 75V 5% 1500W uni 100pF RoHS : Compliant |
| 0 | ||
| ALE75F48 | Panasonic Electronic Components | Electromechanical Relay 48VDC 11.52KOhm 16A SPST-NO (28.6x12.4x24.9)mm THT Power Relay RoHS : Compliant |
| 0 | ||
| MA1.5KE7.5CA | Microchip Technology Inc | TVS 7.5V 5% 1500W bi RoHS : Compliant |
| 0 | ||
| M1.5KE7.5CAE3/TR | Microchip Technology Inc | TVS 7.5V 5% 1500W bi RoHS : Compliant |
| 0 | ||
| MXL1.5KE75A | Microchip Technology Inc | TVS 75V 5% 1500W uni RoHS : Compliant |
| 0 | ||
| MXLP4KE7.5A | Microchip Technology Inc | TVS 7.5V 5% 400W uni RoHS : Compliant |
| 0 | ||
| MXP6KE75A | Microchip Technology Inc | TVS 75V 5% 600W uni RoHS : Compliant |
| 0 | ||
| MXSMCGLCE75A | Microchip Technology Inc | Low Cap TVS 75V 5% 1500W uni 100pF RoHS : Compliant |
| 0 | ||
 Neutron USA | E75 | ABB Low Voltage Products and Systems | Fixed Terminal Blocks NONINS BS RNG TERM NO6 AWG 1/2 BOLT |
| 50 | |
| XCSTE7512 | Telemechanique Sensors | Limit Switches SAFETY INTERLOCK 240VAC 5AMP T-XCS+O |
| 50 | ||
| PRQE75W-E12-S24-D | CUI Inc | DC/DC Converters - 75 W, 24 Vdc, 3.12 A, single regulated output, DIP RoHS : Compliant |
| 50 | ||
| PRQE75W-E12-S48-D | CUI Inc | Isolated DC/DC Converter, 75W, 9-75Vin, 48V 1.56A, Posi Logic, DIP RoHS : Compliant |
| 50 | ||
| ZAE75-81 | ABB Low Voltage Products and Systems | AE45-75 COIL; 24VDC |
| 6 | ||
| EA5E750Q | Banner Engineering Corp | Emitter, 750mm, Range 0.4-4m, 5mm Resolution, 12-30VDC, QD, EZ-Array |
| 5 | ||
| PRQE75W-E12-S12-D | CUI Inc | Isolated DC/DC Converter, 75W, 9-75Vin, 12V 6.25A, Posi Logic, DIP RoHS : Compliant |
| 5 | ||
| GAE75-10-11-81 | ABB Low Voltage Products and Systems | Gae75, 1P Dc Contr, 24Vdc |
| 5 | ||
| AE75-30-00-81 | ABB Low Voltage Products and Systems | AE75 3P CONTR 24VDC |
| 4 | ||
| LE750 | ABB Low Voltage Products and Systems | Mounting Kit, LUG HARDWARE KIT for contactors AF580-AF750 |
| 2 | ||
| GAE75-10-00-87 | ABB Low Voltage Products and Systems | DC SWING CONT. 75A 600V 125VDC COIL |
| 0 | ||
| FLE7511 | Brother International | 1PK 0.82X1.7IN 0.41X1.7IN FOLD POLYP FLAG BLACKINK ON GREEN 72LABL |
| 0 | ||
| WBE750-100NAS | NETGEAR | 1PT INSIGHT MANAGED WIFI 7 TRI-BAND |
| 0 | ||
| E750E | Sola/Hevi-Duty | Transformer; Industrial Control; 0.750KVA 120X240-24 |
| 0 | ||
| T22CT 1TE75L000000 | Sifam Tinsley Precision Instrumentation Ltd | Current Transducer, True RMS, 4-20 mA DC Out., 250A |
| 0 | ||
 Pasternack Enterprises US | PE7510-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 3 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Stainless Steel Body Rated to 2 Watts Up to 50 GHz. PE7510-3 is a fixed 3 dB attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 3 dB. The Pasternack PE7510-3 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 3 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7510-3 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 3 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 7 | |
| PE7510-20 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 20 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 20 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Stainless Steel Body Rated to 2 Watts Up to 50 GHz. PE7510-20 is a fixed 20 dB attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 20 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 20 dB. The Pasternack PE7510-20 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 20 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7510-20 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 20 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 6 | ||
| PE7581-40 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 40 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.5:1, Input Power, Max (CW): 100 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 40 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 100 Watts Up to 10 GHz. PE7581-40 is a 40 dB fixed attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7581-40 fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 100 Watts. This attenuator has a maximum VSWR of 1.5:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 40 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 40 dB. The Pasternack PE7581-40 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 40 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7581-40 will ship the same business day as purchased from Pasternack’s production facility. This 40 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 4 | ||
| PE7510-2 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 2 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 2 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Stainless Steel Body Rated to 2 Watts Up to 50 GHz. PE7510-2 is a fixed 2 dB attenuator from Pasternack. This 2 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 2 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 2 dB. The Pasternack PE7510-2 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 2 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7510-2 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 2 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 3 | ||
| PE7500-10 | Pasternack Enterprises | Key Specifications, Design: Continuously Variable, Maximum Frequency: 4 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.7:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 10 dB, Step Type: Dial. 0 to 10 dB Variable Attenuator, SMA Female to SMA Female Rated to 5 Watts from 2 GHz to 4 GHz. PE7500-10 is a variable attenuator from Pasternack. This SMA microwave attenuator is a continuously variable attenuator design. Our coaxial 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack variable RF attenuator has a SMA female gender for connector 1 and a SMA female for connector 2. Our PE7500-10 variable attenuator has a maximum attenuation of 10 dB. This microwave variable attenuator has a frequency range of 2 GHz to 4 GHz and a maximum VSWR of 1.7:1. Our continuously variable attenuator is rated to 5 Watts at the stated attenuation. This variable RF attenuator has a flat attenuation accuracy of 1.5 dB over operating frequency range and a maximum insertion loss of 0.5 dB. Our continuously variable attenuator has an overall length of 2 inches, width of 1.25 inches, and weighs 0.02 lbs. This radio frequency continuously variable attenuator with SMA connectors is built with aluminum. Additional dimensions and specifications for this 10 dB variable attenuator are in our downloadable PDF datasheet above. Our variable attenuator PE7500-10 is shipped the same day as purchased from Pasternack's facility. This attenuator is part of our RF, microwave and millimeter-wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF variable attenuator as per your requirements. |
| 3 | ||
| PE7513-30 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 40 GHz, Nominal Attenuation: 30 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.4:1, Input Power, Max (CW): 20 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: 2.92mm, Connector-In Gender: Male, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 100 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Body Rated to 20 Watts Up to 40 GHz. PE7513-30 is a 30 dB fixed attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 2 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7513-30 in-series fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 20 Watts. This attenuator has a maximum VSWR of 1.4:1 and operates between -55 and 100 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with black anodized aluminum body material. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 30 dB. The Pasternack PE7513-30 attenuator is rated for maximum frequency up to 40 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7513-30 will ship the same business day as purchased from Pasternack’s production facility. This 30 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7512-20 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 40 GHz, Nominal Attenuation: 20 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 5 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: 2.92mm, Connector-In Gender: Male, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 85 deg C, Min Operating Temperature: -55 deg C. 20 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Body Rated to 5 Watts Up to 40 GHz. PE7512-20 is a 20 dB fixed attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 1.5 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7512-20 in-series fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 85 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 20 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 20 dB. The Pasternack PE7512-20 attenuator is rated for maximum frequency up to 40 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7512-20 will ship the same business day as purchased from Pasternack’s production facility. This 20 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7501-20 | Pasternack Enterprises | Key Specifications, Design: Continuously Variable, Maximum Frequency: 14.5 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.5:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 20 dB, Step Type: Dial. 0 to 20 dB Variable Attenuator, SMA Female to SMA Female Rated to 5 Watts from 10.7 GHz to 14.5 GHz. PE7501-20 is a variable attenuator from Pasternack. This SMA microwave attenuator is a continuously variable attenuator design. Our coaxial 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack variable RF attenuator has a SMA female gender for connector 1 and a SMA female for connector 2. Our PE7501-20 variable attenuator has a maximum attenuation of 20 dB. This microwave variable attenuator has a frequency range of 10.7 GHz to 14.5 GHz and a maximum VSWR of 1.5:1. Our continuously variable attenuator is rated to 5 Watts at the stated attenuation. This variable RF attenuator has a flat attenuation accuracy of 1.5 dB over operating frequency range and a maximum insertion loss of 0.5 dB. Our continuously variable attenuator has an overall length of 2 inches, width of 1.25 inches, and weighs 0.02 lbs. This radio frequency continuously variable attenuator with SMA connectors is built with aluminum. Additional dimensions and specifications for this 20 dB variable attenuator are in our downloadable PDF datasheet above. Our variable attenuator PE7501-20 is shipped the same day as purchased from Pasternack's facility. This attenuator is part of our RF, microwave and millimeter-wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF variable attenuator as per your requirements. |
| 2 | ||
| PE7580-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 0.8 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-10 is a 10 dB fixed attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-10 fixed attenuator is available with a typical attenuation accuracy of 0.8 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7580-10 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 10 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-10 will ship the same business day as purchased from Pasternack’s production facility. This 10 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7511-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 3 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 5 Watts, Body Material: Aluminum, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Aluminum Body Rated to 5 Watts Up to 50 GHz. PE7511-3 is a fixed 3 dB attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 3 dB. The Pasternack PE7511-3 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 3 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7511-3 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 3 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE7512-30 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 40 GHz, Nominal Attenuation: 30 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 5 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: 2.92mm, Connector-In Gender: Male, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 85 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Body Rated to 5 Watts Up to 40 GHz. PE7512-30 is a 30 dB fixed attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 1.5 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7512-30 in-series fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 85 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 30 dB. The Pasternack PE7512-30 attenuator is rated for maximum frequency up to 40 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7512-30 will ship the same business day as purchased from Pasternack’s production facility. This 30 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE7520-20 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 20 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: QMA, Connector-In Gender: Male, Connector-Out Series: QMA, Connector-Out Gender: Female. 20 dB Fixed Attenuator, QMA Male to QMA Female Brass Tri-Metal Body Rated to 2 Watts Up to 6 GHz. PE7520-20 is a fixed 20 dB attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7520-20 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. Our fixed radio frequency attenuator with QMA connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 20 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This QMA attenuator has a male gender on side 1 and a QMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 20 dB. The Pasternack PE7520-20 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, 5G cellular bands and DAS systems applications. The 20 dB attenuator has a brass connector built with tri-metal plating. Our fixed RF attenuator PE7520-20 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 20 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE7520-15 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 15 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: QMA, Connector-In Gender: Male, Connector-Out Series: QMA, Connector-Out Gender: Female. 15 dB Fixed Attenuator, QMA Male to QMA Female Brass Tri-Metal Body Rated to 2 Watts Up to 6 GHz. PE7520-15 is a fixed 15 dB attenuator from Pasternack. This 15 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7520-15 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. Our fixed radio frequency attenuator with QMA connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 15 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This QMA attenuator has a male gender on side 1 and a QMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 15 dB. The Pasternack PE7520-15 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, 5G cellular bands and DAS systems applications. The 15 dB attenuator has a brass connector built with tri-metal plating. Our fixed RF attenuator PE7520-15 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 15 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE7520-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: QMA, Connector-In Gender: Male, Connector-Out Series: QMA, Connector-Out Gender: Female. 10 dB Fixed Attenuator, QMA Male to QMA Female Brass Tri-Metal Body Rated to 2 Watts Up to 6 GHz. PE7520-10 is a fixed 10 dB attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7520-10 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. Our fixed radio frequency attenuator with QMA connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This QMA attenuator has a male gender on side 1 and a QMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7520-10 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, 5G cellular bands and DAS systems applications. The 10 dB attenuator has a brass connector built with tri-metal plating. Our fixed RF attenuator PE7520-10 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 10 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE7580-50 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 50 dB, Attenuation Accuracy, Typ: 1.2 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 50 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-50 is a 50 dB fixed attenuator from Pasternack. This 50 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-50 fixed attenuator is available with a typical attenuation accuracy of 1.2 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 50 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 50 dB. The Pasternack PE7580-50 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 50 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-50 will ship the same business day as purchased from Pasternack’s production facility. This 50 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
 Sager | E75 | ABB Group | Fixed Terminal Blocks |
| 0 | |
| SE75P-DR0 | Panduit Corp | Spiral Wraps, Sleeves, Tubing & Conduit Exp. Sleeving, .75 (19.1mm),Black |
| 0 | ||
| SMAJE7-5AH | Eaton Bussmann | ESD Suppressors / TVS Diodes AUTO TVS DIODE, SMAJE FAMILY, 7-5Vdc, Un | 0 | |||
| RE757 | ABB Group | Fixed Terminal Blocks |
| 0 | ||
| PTE7500-31-DG-1A016BN | Sensata Technologies | PTE7500-31-DG-1A016BN PRESSURE -CUSTOM | 0 | |||
| PTE7500-31AG-1A200BN | Sensata Technologies | INDUSTRIAL DIGITAL PRESSURE SENSOR, 200 BAR, CANOPEN, G1/4, FKM SEAL |
| 0 | ||
ATS-07E-75-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 RoHS : Compliant |
| 0 | ||
| ATS-14E-75-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 |
| 0 | ||
| ATS-15E-75-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM |
| 0 | ||
| ATS-08E-75-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 RoHS : Compliant |
| 0 | ||
| ATS-16E-75-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM |
| 0 | ||
| ATS-09E-75-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 |
| 0 | ||
| ATS-17E-75-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM |
| 0 | ||
| AAE7545-00 | TE Connectivity | TE Connectivity BTA1-10-06-4-J-CV4018 | 0 | |||
| FFA.1E.750.CNS | LEMO connectors | Circular Push Pull Connectors STRAIGHT PLUG CABLE COLLET | 0 | |||
 TE Connectivity | RQ73C1E75RBTD | TE Connectivity | RQ 0402 75R 0.1% 10PPM 5K RL Resistance Value: 75 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 75 Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C1E75RBTD | Internal Number: 2-2176362-7 | TE Connectivity RoHS : Compliant |
| 10,711 | |
| RP73PF1E75KBTD | TE Connectivity | RP 1E 0.1W 75K 0.1% 25PPM 5K RL Resistance Value: 75K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 75K Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF1E75KBTD | Internal Number: 7-2176307-6 | TE Connectivity RoHS : Compliant |
| 10,341 | ||
| RT73F1E75KBTH | TE Connectivity | RT 1E 0.125W 75K 0.1% 25PPM 10K RL Resistance Value: 75K Ω Element Type: Thick Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Thick Film Precision Resistors - Type Rt73 Series | 75K Ω Thick Film Precision Resistor .1 % | Part Number: RT73F1E75KBTH | Internal Number: 3-2176756-3 | TE Connectivity RoHS : Compliant |
| 9,980 | ||
| RQ73C1E750RBTD | TE Connectivity | RQ 0402 750R 0.1% 10PPM 5K RL Resistance Value: 750 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 750 Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C1E750RBTD | Internal Number: 2-2176363-4 | TE Connectivity RoHS : Compliant |
| 7,382 | ||
| RT73F1E750RBTH | TE Connectivity | RT 1E 0.125W 750R 0.1% 25PPM 10K RL Resistance Value: 750 Ω Element Type: Thick Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Thick Film Precision Resistors - Type Rt73 Series | 750 Ω Thick Film Precision Resistor .1 % | Part Number: RT73F1E750RBTH | Internal Number: 3-2176754-9 | TE Connectivity RoHS : Compliant |
| 6,530 | ||
| RP73PF1E75RBTD | TE Connectivity | RP 1E 0.1W 75R 0.1% 25PPM 5K RL Resistance Value: 75 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 75 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF1E75RBTD | Internal Number: 8-2176304-5 | TE Connectivity RoHS : Compliant |
| 4,055 | ||
| RP73PF1E750RBTD | TE Connectivity | RP 1E 0.1W 750R 0.1% 25PPM 5K RL Resistance Value: 750 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 750 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF1E750RBTD | Internal Number: 8-2176305-2 | TE Connectivity RoHS : Compliant |
| 2,415 | ||
| TE750B1R2J | TE Connectivity | TE 750W 1R2 5% Bracket Resistance Value: 1.2 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 1.2 Ω Wire Wound 5 % Power Resistor | Part Number: TE750B1R2J | Internal Number: 1879452-2 | TE Connectivity RoHS : Compliant |
| 17 | ||
| TE750B22RJ | TE Connectivity | TE 750W 22R 5% Bracket Resistance Value: 22 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 22 Ω Wire Wound 5 % Power Resistor | Part Number: TE750B22RJ | Internal Number: 1-1879452-7 | TE Connectivity RoHS : Compliant |
| 10 | ||
| TE750B2R2J | TE Connectivity | TE 750W 2R2 5% Bracket Resistance Value: 2.2 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 2.2 Ω Wire Wound 5 % Power Resistor | Part Number: TE750B2R2J | Internal Number: 1879452-5 | TE Connectivity RoHS : Compliant |
| 10 | ||
| TE750B150RJ | TE Connectivity | TE 750W 150R 5% Bracket Resistance Value: 150 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 150 Ω Wire Wound 5 % Power Resistor | Part Number: TE750B150RJ | Internal Number: 2-1879452-7 | TE Connectivity RoHS : Compliant |
| 6 | ||
| TE750B12RJ | TE Connectivity | TE 750W 12R 5% Bracket Resistance Value: 12 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 12 Ω Wire Wound 5 % Power Resistor | Part Number: TE750B12RJ | Internal Number: 1-1879452-4 | TE Connectivity RoHS : Compliant |
| 6 | ||
| TE750B33RJ | TE Connectivity | TE 750W 33R 5% Bracket Resistance Value: 33 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 33 Ω Wire Wound 5 % Power Resistor | Part Number: TE750B33RJ | Internal Number: 1-1879452-9 | TE Connectivity RoHS : Compliant |
| 2 | ||
| TE750B15RJ | TE Connectivity | TE 750W 15R 5% Bracket Resistance Value: 15 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 15 Ω Wire Wound 5 % Power Resistor | Part Number: TE750B15RJ | Internal Number: 1-1879452-5 | TE Connectivity RoHS : Compliant |
| 1 | ||
| TE750B180RJ | TE Connectivity | TE 750W 180R 5% Bracket Resistance Value: 180 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 180 Ω Wire Wound 5 % Power Resistor | Part Number: TE750B180RJ | Internal Number: 2-1879452-8 | TE Connectivity RoHS : Compliant |
| 1 | ||
 Venkel Ltd. | MELFC0207-VE-7500BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�25PPM;750R;�0.1% RoHS : Compliant | 0 | ||
| MELFM0204-TE-7501FT | VENKEL LTD | MELF Molded Thin Film CR;0204;1/4W;�25PPM;7.5K;�1% RoHS : Not Compliant | 0 | |||
| MELFM0204-ZE-7501DT | VENKEL LTD | MELF Molded Thin Film CR;0204;2/5W;�25PPM;7.5K;�0.5% RoHS : Not Compliant | 0 | |||
| MELFM0207-VE-7502FT | VENKEL LTD | MELF Molded Thin Film CR;0207;1/2W;�25PPM;75K;�1% RoHS : Not Compliant | 0 | |||
| HPTF0603-SE-7502DT | VENKEL LTD | High Power Thin Film CR;0603;1/6W;�25PPM;75K;�0.5% RoHS : Compliant | 0 | |||
| HPTF0805-TE-7501FT | VENKEL LTD | High Power Thin Film CR;0805;1/4W;�25PPM;7.5K;�1% RoHS : Compliant | 0 | |||
| HPTF1206-UE-7501CT | VENKEL LTD | High Power Thin Film CR;1206;1/3W;�25PPM;7.5K;�0.25% RoHS : Compliant | 0 | |||
| AGTF0402-PE-7501DT | VENKEL LTD | Auto Grade Thin Film;0402;1/16W;�25PPM;7.5K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0102-YE-75R0FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/3W;�25PPM;75R;�1% RoHS : Compliant | 0 | |||
| MELFC0204-TE-7500FT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�25PPM;750R;�1% RoHS : Compliant | 0 | |||
| MELFC0204-ZE-7500DT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�25PPM;750R;�0.5% RoHS : Compliant | 0 | |||
| MELFC0207-VE-7501FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�25PPM;7.5K;�1% RoHS : Compliant | 0 | |||
| MELFM0207-VE-7500CT | VENKEL LTD | MELF Molded Thin Film CR;0207;1/2W;�25PPM;750R;�0.25% RoHS : Not Compliant | 0 | |||
| MELFM0207-XE-7501BT | VENKEL LTD | MELF Molded Thin Film CR;0207;1W;�25PPM;7.5K;�0.1% RoHS : Not Compliant | 0 | |||
| TFCR0603-10W-E-7500FT | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;750R;�1% RoHS : Compliant | 0 | |||
 Vyrian | TLE75080EMDXUMA1 | Infineon Technologies AG | Buffer/Inverter Based Peripheral Driver, 0.5A, PDSO24 RoHS : Compliant | 12,698 | ||
| TLE75242EMDXUMA1 | Infineon Technologies AG | Buffer/Inverter Based Peripheral Driver, 0.5A, PDSO24 RoHS : Compliant | 11,776 | |||
| ADE7569ASTZF16 | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant | 7,116 | |||
| TLE75080EMHXUMA1 | Infineon Technologies AG | Buffer/Inverter Based Peripheral Driver, 0.5A, PDSO24 RoHS : Compliant | 6,763 | |||
EP4CE75F29C8L | Altera Corporation | Field Programmable Gate Array, 4713 CLBs, 362MHz, 75408-Cell, PBGA780 RoHS : Not Compliant | 4,087 | |||
| EP4CE75F29I8LN | Altera Corporation | Field Programmable Gate Array, 4713 CLBs, 362MHz, 75408-Cell, PBGA780 RoHS : Compliant | 3,532 | |||
| EP4CE75F29C8N | Altera Corporation | Field Programmable Gate Array, 4713 CLBs, 472.5MHz, 75408-Cell, PBGA780 RoHS : Compliant | 3,256 | |||
| EP4CE75F23I7N | Altera Corporation | Field Programmable Gate Array, 4713 CLBs, 472.5MHz, 75408-Cell, PBGA484 RoHS : Compliant | 3,066 | |||
| EP4CE75F23C8LN | Altera Corporation | Field Programmable Gate Array, 4713 CLBs, 362MHz, 75408-Cell, PBGA484 RoHS : Compliant | 3,052 | |||
| EP4CE75F29C6N | Altera Corporation | Field Programmable Gate Array, 4713 CLBs, 472.5MHz, 75408-Cell, PBGA780 RoHS : Compliant | 2,599 | |||
| EP4CE75F23I7 | Altera Corporation | Field Programmable Gate Array, 4713 CLBs, 75408-Cell, PBGA484 RoHS : Not Compliant | 2,059 | |||
| EP4CE75F23C6N | Altera Corporation | Field Programmable Gate Array, 4713 CLBs, 472.5MHz, 75408-Cell, PBGA484 RoHS : Compliant | 1,933 | |||
| EP4CE75F23 | Altera Corporation | Field Programmable Gate Array, 47 CLBs, PBGA484 | 1,785 | |||
| RE75G2R50C02 | Vishay Intertechnologies | Fixed Resistor, Wire Wound, 30W, 2.5ohm, 8.6603V, 1% +/-Tol, 50ppm/Cel, Chassis Mount RoHS : Unknown | 463 | |||
MSMCJLCE75AE3TR | Microsemi Corporation (now Microchip) | Trans Voltage Suppressor Diode, 1500W, 75V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB RoHS : Compliant | 322 | |||
 Win Source Electronics | TLE75602-ESH?INFINEON | Infineon Technologies AG | Switches & Controller |
| 15,000 | |
| TLE75080ESHXUMA1 | Infineon Technologies AG | IC PWR DRVR N-CHAN 1:8 TSDSO-24 RoHS : Compliant |
| 11,462 | ||
| TLE75602-ESH | Infineon Technologies AG | 8 330mA TSDSO-24 Power Distribution Switches, Load Drivers RoHS RoHS : Compliant |
| 10,000 | ||
| TLE75008ESDXUMA1 | Infineon Technologies AG | IC PWR DRVR N-CHAN 1:8 TSDSO-24 RoHS : Compliant |
| 9,999 | ||
| TLE75602ESHXUMA1 | Infineon Technologies AG | IC PWR DRVR N-CHAN 1:8 TSDSO-24 / Power Switch/Driver 1:8 N-Channel 330mA PG-TSDSO-24-21 RoHS : Compliant |
| 8,347 | ||
| TLE75242-ESD | Infineon Technologies AG | 16 bit Multichannel SPI Switches & Controller RoHS : Compliant |
| 3,000 | ||
| EP4CE75F23C8N | Altera Corporation | IC FPGA 292 I/O 484FBGA RoHS : Compliant |
| 2,000 | ||
| EP4CE75F23I7N | Altera Corporation | IC FPGA 292 I/O 484FBGA RoHS : Compliant |
| 1,680 | ||
| EP4CE75F29I7N | Intel Corporation | IC FPGA 426 I/O 780FBGA / series Field Programmable Gate Array (FPGA) IC 426 2810880 75408 780-BGA RoHS : Compliant |
| 1,042 | ||
| EP4CE75F23C6 | Altera Corporation | IC FPGA 292 I/O 484FBGA RoHS : Not Compliant |
| 623 | ||
| EP4CE75U19I7N | Intel Corporation | IC FPGA 292 I/O 484UBGA RoHS : Compliant |
| 252 | ||
| TLE75602-ESD | Infineon Technologies AG | Switches & Controller RoHS : Compliant |
| 90 | ||
| EP4CE75F29I7 | Intel Corporation | IC FPGA 426 I/O 780FBGA RoHS : Not Compliant |
| 16 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand