 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
G-R1 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 TME | AGR12 | Kai Suh Suh Enterprise Co Ltd | Cable gland; M12; 1.25; IP68; polyamide; black; UL94V-2; 12.1mm |
| 11,976 | |
| 44GR100KLFTB | TT Electronics plc | Charact: linear; 100kΩ; ±10%; SMD; 250mW; cermet; 44 |
| 721 | ||
| OSX10201-GGR1 | OptoSupply Limited | Display: LED; bargraph; green (7x) / red (3x); 25.5x10.2x7.9mm |
| 645 | ||
| FLRY-A0.35-GR/1 | BQ Cable | Wire; FLRY-A; 1x0.35mm2; stranded; Cu; PVC; green; 60V; Class: 5 |
| 412 | ||
| FLRY-B1.00-YL/GR/1 | BQ Cable | Wire; FLRY-B; 1x1mm2; stranded; Cu; PVC; yellow-green; 60V; Class: 5 |
| 363 | ||
| FLRY-A0.75-GR/1 | BQ Cable | Wire; FLRY-A; 1x0.75mm2; stranded; Cu; PVC; green; 60V; Class: 5 |
| 320 | ||
| 44GR100KLFT7 | TT Electronics plc | 100kΩ; 250mW; SMD; ±10%; linear; cermet; 44 |
| 221 | ||
| CGR163U016U2L | Knowles Precision Devices | Capacitor: electrolytic; 16mF; 16VDC; Ø44.45x66.675mm; 2000h |
| 24 | ||
| FLRYW-B0.50-GR/1 | BQ Cable | Wire; FLRYW-B; 1x0.5mm2; stranded; Cu; PVC; green; 60V; Class: 5 |
| 4 | ||
| 11BGR1201A024 | Lovato Electric Inc | Contactor: 3-pole reversing; NO x3; Auxiliary contacts: NC; 24VAC |
| 0 | ||
| 11BGR1201A23060 | Lovato Electric Inc | Contactor: 3-pole reversing; NO x3; Auxiliary contacts: NC; 12A |
| 0 | ||
| 11BGR1201D125 | Lovato Electric Inc | Contactor: 3-pole reversing; NO x3; Auxiliary contacts: NC; 12A |
| 0 | ||
| 11BGR1201D048 | Lovato Electric Inc | Contactor: 3-pole reversing; NO x3; Auxiliary contacts: NC; 48VDC |
| 0 | ||
| 11BGR1201D012 | Lovato Electric Inc | Contactor: 3-pole reversing; NO x3; Auxiliary contacts: NC; 12VDC |
| 0 | ||
| NH42GR1000KVA-8 | Mersen Electrical Power | Fuse: fuse; NH4a; ceramic; holders; 1.443kA; 400VAC; gTr |
| 0 | ||
 Verical | GR1M | EIC Corporation | Diode Switching 1KV 1A 2-Pin SMA RoHS : Compliant |
| 130,000 | |
| GR1D | Suzhou Good-Ark Electronics Co Ltd | Diode Switching 200V 1A 2-Pin SMA RoHS : Compliant |
| 7,500 | ||
| GR1J | Suzhou Good-Ark Electronics Co Ltd | Diode Switching 600V 1A 2-Pin SMA RoHS : Compliant |
| 6,177 | ||
| GR1B | Suzhou Good-Ark Electronics Co Ltd | Diode Switching 100V 1A 2-Pin SMA RoHS : Compliant |
| 4,705 | ||
| GR108-SLD | Custom Connector Corporation | Relay Socket SKT 8 POS Solder ST Panel Mount |
| 250 | ||
 Avnet Americas | MC908GR16CFAE | NXP Semiconductors | 8 Bit MCU, HC08 Family HC08GR Series Microcontrollers, HC08, 8 MHz, 16 KB, 48 Pins, LQFP - Trays (Alt: MC908GR16CFAE) RoHS : Compliant |
| 1,455 | |
| RLP01R4700GR15 | Vishay Intertechnologies | - Tape and Reel (Alt: RLP01R4700GR15) RoHS : Not Compliant |
| 0 | ||
| RE60GR178C02 | Vishay Intertechnologies | - Bulk (Alt: RE60GR178C02) RoHS : Not Compliant |
| 0 | ||
| APT70GR120JD60 | Microchip Technology Inc | - Rail/Tube (Alt: APT70GR120JD60) RoHS : Not Compliant |
| 0 | ||
| IT4100GR10SL-3P | Glenair Inc | 5015 THREADED COUPLING CONNECTOR POWER PRODUCTS - Bulk (Alt: IT4100GR10SL-3P) RoHS : Not Compliant |
| 0 | ||
| ITS4106GR16-12PB0 | Glenair Inc | 5015 REVERSE BAYONET POWER PRODUCTS - Bulk (Alt: ITS4106GR16-12PB0) RoHS : Not Compliant |
| 0 | ||
| ITS41070GR18-11SF7 | Glenair Inc | 5015 REVERSE BAYONET POWER PRODUCTS - Bulk (Alt: ITS41070GR18-11SF7) RoHS : Not Compliant |
| 0 | ||
| GR1D | Surge Components Inc | - Tape and Reel (Alt: GR1D) RoHS : Not Compliant |
| 0 | ||
| NCLH2512MGR140TRQYF | NIC Components Corp | LOW RESISTANCE METAL ALLOY CURRENT SENSING RESISTO - Tape and Reel (Alt: NCLH2512MGR140TRQYF) RoHS : Not Compliant | 0 | |||
| RE75GR182C02 | Vishay Intertechnologies | - Bulk (Alt: RE75GR182C02) RoHS : Not Compliant |
| 0 | ||
| RE60GR147C02 | Vishay Intertechnologies | - Bulk (Alt: RE60GR147C02) RoHS : Not Compliant |
| 0 | ||
| IT3100GR14S-5S | Glenair Inc | 5015 THREADED COUPLING CONNECTOR POWER PRODUCTS - Bulk (Alt: IT3100GR14S-5S) RoHS : Not Compliant |
| 0 | ||
| IT3106GR12-5P | Glenair Inc | 5015 THREADED COUPLING CONNECTOR POWER PRODUCTS - Bulk (Alt: IT3106GR12-5P) RoHS : Not Compliant |
| 0 | ||
| ITB41030GR14S-1S | Glenair Inc | 5015 REVERSE BAYONET POWER PRODUCTS - Bulk (Alt: ITB41030GR14S-1S) RoHS : Not Compliant |
| 0 | ||
| ITS4100GR10SL-4P | Glenair Inc | 5015 REVERSE BAYONET POWER PRODUCTS - Bulk (Alt: ITS4100GR10SL-4P) RoHS : Not Compliant |
| 0 | ||
 Mouser Electronics | GR103E1K | Littelfuse Inc | NTC Thermistors NTC THRM GLASS BEAD 3435 10K 10% RoHS : Compliant |
| 344 | |
| GR102F1K | Littelfuse Inc | NTC Thermistors NTC THERMISTOR 1K OHM 10% GLASS BEAD RoHS : Compliant |
| 331 | ||
| PBM2-M-GR12-F-BA-67 | Same Sky | Pushbutton Switches - Industrial Push Button, SPST-NO, Off-(On), 3V, Anti Vandal, 16mm, Raised, Black Alloy, Blue Illuminated, Panel Mount, IP67 RoHS : Compliant |
| 99 | ||
| PBM2-M-GR12-P-F-BA-67 | Same Sky | Pushbutton Switches - Industrial Push Button, SPST-NO, Off-(On), 5-12V, Anti Vandal, 16mm, Flat, Black Alloy, Green Illuminated, Panel Mount, IP67 RoHS : Compliant |
| 99 | ||
| PBM1-M-GR12-P-F-SS-67 | Same Sky | Pushbutton Switches - Industrial Push Button, SPST-NO, Off-(On), 5-12V, Anti Vandal, 16mm, Flat, SS, Green Illuminated, Panel Mount, IP67 RoHS : Compliant |
| 92 | ||
| PBM1-M-GR12-F-SS-67 | Same Sky | Pushbutton Switches - Industrial Push Button, SPST-NO, Off-(On), 3V, Anti Vandal, 16mm, Raised, SS, Blue Illuminated, Panel Mount, IP67 RoHS : Compliant |
| 80 | ||
| GR1 | Eaton Corporation | Time Delay & Timing Relays LTG CONT OPN 100A 3P 120V MECH HLD |
| 0 | ||
| GR108-PCB | Song Chuan Precision Company | Relay Sockets & Hardware |
| 0 | ||
| GR108-SLD | Song Chuan Precision Company | Relay Sockets & Hardware |
| 0 | ||
| GR104R1K | Littelfuse Inc | NTC Thermistors NTC THERMISTOR 100K OHM 10% GLASS BEAD RoHS : Compliant |
| 0 | ||
| GR1-202 | ABB Low Voltage Products and Systems | Fixed Terminal Blocks FIG 8 CONN 1IN GRD ROD 2-2/0 AWG |
| 0 | ||
| GR1-40250 | ABB Low Voltage Products and Systems | Fixed Terminal Blocks FIG 8 CONN 1IN GRD ROD 4/0-250 |
| 0 | ||
| GR12-202 | ABB Low Voltage Products and Systems | Fixed Terminal Blocks FIG 8 CONN 1/2IN GRD ROD 2-2/0 AWG |
| 0 | ||
| GR1W | ABB Low Voltage Products and Systems | Conduit Fittings & Accessories 3/8 GROUND STRAP |
| 0 | ||
| GR12-306 | ABB Low Voltage Products and Systems | Fixed Terminal Blocks PIGTAIL CONN, 1/2IN ROD, 87H DIE |
| 0 | ||
 Arrow Electronics | GR1D | Suzhou Good-Ark Electronics Co Ltd | Diode Switching 200V 1A 2-Pin SMA RoHS : Compliant |
| 7,500 | |
| GR1J | Suzhou Good-Ark Electronics Co Ltd | Diode Switching 600V 1A 2-Pin SMA RoHS : Compliant |
| 6,177 | ||
| GR1B | Suzhou Good-Ark Electronics Co Ltd | Diode Switching 100V 1A 2-Pin SMA RoHS : Compliant |
| 4,705 | ||
 Newark | MCR13-203AL3-01-BGRGR1 | SPC Multicomp | Rocker Switch, Spst, 25A, 12Vdc, Panel; |Multicomp Pro MCR13-203AL3-01-BGRGR1 RoHS : Compliant |
| 868 | |
| FMCA2601/GR-12 | Fairview Microwave Inc | Cbl Assy, Bnc Plug-Plug, 75 Ohm, 12"; |Fairview Microwave FMCA2601/GR-12 RoHS : Not Compliant |
| 78 | ||
| TRD815SRA8GR-1 | L-com Inc | Enet Cbl, Cat5E, 90° Rj45 Pl-90° Rj45 Pl; |L-Com TRD815SRA8GR-1 RoHS : Compliant |
| 77 | ||
| TRD815RAGR-1 | L-com Inc | Patch Cord, Cat 5E Right Angle, 1Ft, Gre; |L-Com TRD815RAGR-1 RoHS : Compliant |
| 74 | ||
| FG-R14-6A | KEMET Corporation | Current Sensor, 0.6A, 5.25V, Analog; Sensor Output Type:Analog; Supply Voltage Range:4.75V To 5.25V; Measured Current:Ac/Dc; Accuracy:-; Current Sensor Technology:Flux Gate Current Sensor; Secondary Signal Type:Current Rohs Compliant: Yes |Kemet FG-R14-6A RoHS : Compliant |
| 30 | ||
| TRD815GR-1 | L-com Inc | Ethernet Cbl, Cat5E; |L-Com TRD815GR-1 RoHS : Compliant |
| 27 | ||
| FMCA2673/GR-120 | Fairview Microwave Inc | Cbl Assy, Bnc Plug-Plug, 75 Ohm, 120"; |Fairview Microwave FMCA2673/GR-120 RoHS : Not Compliant |
| 25 | ||
| FMCA2601/GR-120 | Fairview Microwave Inc | Cbl Assy, Bnc Plug-Plug, 75 Ohm, 120"; |Fairview Microwave FMCA2601/GR-120 RoHS : Not Compliant |
| 17 | ||
| TRD815GR-100 | L-com Inc | Ethernet Cbl, Cat5E; |L-Com TRD815GR-100 RoHS : Compliant |
| 15 | ||
| TRD695RA1GR-1 | L-com Inc | Ethernet Cbl, Cat6; |L-Com TRD695RA1GR-1 RoHS : Compliant |
| 11 | ||
| FMCA2674/GR-12 | Fairview Microwave Inc | Cbl Assy, Bnc Plug-Hd Bnc Plug, 12"; |Fairview Microwave FMCA2674/GR-12 RoHS : Not Compliant |
| 10 | ||
| MTFDKBN30T7TGR-1BK1DFCYY | Micron Technology Inc | Ssd, Internal, Tlc Nand, 30720Gb; Available Until Stocks Are Exhausted |Micron Technology MTFDKBN30T7TGR-1BK1DFCYY RoHS : Compliant |
| 6 | ||
| SFODLC-GR-10 | L-com Inc | Fo Cbl, Singlemode, 2Fiber, 9Um/125Um; |L-Com SFODLC-GR-10 RoHS : Compliant |
| 5 | ||
| FMCA2677/GR-12 | Fairview Microwave Inc | Cbl Assy, Hd Bnc Plug-1.0/2.3 Plug, 12"; |Fairview Microwave FMCA2677/GR-12 RoHS : Not Compliant |
| 1 | ||
| FMCA2677/GR-120 | Fairview Microwave Inc | Cbl Assy, Hd Bnc Plug-1.0/2.3 Plug, 120"; |Fairview Microwave FMCA2677/GR-120 RoHS : Not Compliant |
| 1 | ||
 RS | GR108-SLD | Custom Connector Corporation | RELAY SOCKET, 8 PIN, 300 V, 10 A, 100 MEGOHMS (MIN.), GR SERIES, SOLDER |
| 90 | |
| 172704-0111 (FPHGR-1AE) | Molex / FCT | FCT PLASTIC BACKSHELL FOR D-SUB CONNECTOR, SHIELDED, SHELL SIZE 1 |
| 85 | ||
| SSA-EB1PLGR-12ECQ8 (26628) | Banner Engineering Corp | E-STOP, 30MM MOUNT, 40MM PUSHBUTTON, GREEN/RED, 2NC/1NO-PNP, IP65, 8-PIN QD |
| 79 | ||
| SSA-EB1PLGR-12ECQ8-WC (800035) | Banner Engineering Corp | EMERGENCY STOP BUTTON, 40MM, RED GREEN ILLUMINATION, SSA-EB SERIES |
| 28 | ||
| GR-1/8-B (151215) | Festo | FLOW CONTROL VALVE, ONE WAY, 210 L/MIN, G 1/8, .5-10 BAR |
| 23 | ||
| 1SET411205R0000 (WD-1-CP-GR100) | TE Connectivity | ACCESSORY, COVER, PVC, LENGTH 78.74 IN, WIDTH 3.937, HEIGHT .35 IN, GRAY |
| 10 | ||
| 1SET411004R0000 (WD-1-DP-GR1201) | TE Connectivity | WIRING DUCT, PVC, 100MM H, 2M L, 120MM W, GRAY, FLAME-RETARDANT, -5 TO 60 C DEG |
| 8 | ||
| BNS36-11/01ZG-R (101193177) | Schmersal | SAFETY SENSOR, CODED MAGNET,1)NO/1)NC CONTACTS, NC SIGNALING CONTACT, RH DOOR, LE |
| 7 | ||
| 1SET411003R0000 (WD-1-DP-GR1008) | TE Connectivity | WIRING DUCT, PVC, GRAY, LENGTH 2M, FLAME-RETARDANT, W 100 X H 80MM, -5 TO 60 C |
| 6 | ||
| BNS36-02ZG-R (101190050) | Schmersal | SAFETY SENSOR |
| 5 | ||
| F2211/16 GR103 | Alpha Wire | HEAT SHRINK TUBING, 1/16" ID, 2:1, GREEN XLPO, 4 PIECE(X25), FIT |
| 4 | ||
| F2213/4 GR105 | Alpha Wire | HEAT SHRINK TUBING, 3/4" ID, 2:1, XLPO, 4 PIECE(X5), GREEN, FIT |
| 3 | ||
| TIUB01GR1-20 | SMC Corporation of America | TUBING, POLYURETHANE, TIUB SERIES |
| 1 | ||
| TU0604GR1-100 | SMC Corporation of America | TUBING, POLYURETHANE, GRAY SOLID, FOR 6MM OD TUBING, 100M ROLL |
| 1 | ||
| BAM01TC (SCHLAUCHSCHELLE BMF-GR.10) | Balluff Inc | SCHLAUCHSCHELLE BMF-GR.10 |
| 1 | ||
 Microchip Technology Inc | SGR117AK | Microchip Technology Inc | Linear Voltage Regulator - Positive Adjustable Rad Hard, Adjustable, 1.5A, Projected EOL: 2046-01-27 RoHS : Not Compliant |
| 0 | |
| APT40GR120S | Microchip Technology Inc | IGBT MOS 8 1200 V 40 A TO-268, TO-268, Projected EOL: 2028-01-28 RoHS : Compliant |
| 0 | ||
| APT25GR120S | Microchip Technology Inc | IGBT MOS 8 1200 V 25 A TO-268, TO-268, Projected EOL: 2028-01-28 RoHS : Compliant |
| 0 | ||
| APT70GR120J | Microchip Technology Inc | IGBT MOS 8 1200 V 70 A SOT-227, SOT-227, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT25GR120B | Microchip Technology Inc | IGBT MOS 8 1200 V 25 A TO-247, TO-247, Projected EOL: 2028-01-28 RoHS : Compliant |
| 0 | ||
| APT40GR120B | Microchip Technology Inc | IGBT MOS 8 1200 V 40 A TO-247, TO-247, Projected EOL: 2028-01-28 RoHS : Compliant |
| 0 | ||
| APT85GR120L | Microchip Technology Inc | IGBT MOS 8 1200 V 85 A TO-264, TO-264, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT70GR120L | Microchip Technology Inc | IGBT MOS 8 1200 V 70 A TO-264, TO-264, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT70GR120B2 | Microchip Technology Inc | IGBT MOS 8 1200 V 70 A TO-247 MAX, T-MAX, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT85GR120B2 | Microchip Technology Inc | IGBT MOS 8 1200 V 85 A TO-247 MAX, T-MAX, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT50GR120B2 | Microchip Technology Inc | IGBT MOS 8 1200 V 50 A TO-247 MAX, T-MAX, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT50GR120JD30 | Microchip Technology Inc | IGBT MOS 8 1200 V 50 A SOT-227, SOT-227, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT25GR120SD15 | Microchip Technology Inc | IGBT MOS 8 1200 V 25 A TO-268, TO-268, Projected EOL: 2028-01-28 - Contact for Pricing RoHS : Compliant | 0 | |||
| APT25GR120BD15 | Microchip Technology Inc | IGBT MOS 8 1200 V 25 A TO-247, TO-247, Projected EOL: 2028-01-28 RoHS : Compliant |
| 0 | ||
| APT40GR120B2D30 | Microchip Technology Inc | IGBT MOS 8 1200 V 40 A TO-247 MAX, T-MAX, Projected EOL: 2028-01-28 RoHS : Compliant |
| 0 | ||
 Onlinecomponents.com | HA1A-R1-G | IDEC Corporation | CAP RoHS : Compliant |
| 0 | |
| 26ET96-R1-G | Honeywell Sensing and Control | MICRO SWITCH™ Electro-Magnetic Held Toggle Switches: ET Series, Double Pole Double Throw (DPDT), 2 Position (On - Mom. On, Coil Energized: On - On), Diodes In Coil Circuitry, Receptacle Connector To Mate With MS27473T10B35SA, Locking Lever (Locked In Extreme Position, Keyway Side) RoHS : Compliant |
| 0 | ||
| APW199-G-W/AW-R1 | IDEC Corporation | W/OLAMP RoHS : Compliant |
| 0 | ||
| ABW110-G-W/AW-R1 | IDEC Corporation | TW FLUSH PB W/AW-R1 RoHS : Compliant |
| 0 | ||
| VMVL-3-P-R1-G-UNV1-S903 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| VMVL-3-J-R1-G-UNV1-S890 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| VMVL-7-J-R1-G-UNV1 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| VMVL-7-J-R1-G-UNV1-S831 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| PVML-3-J-R1-G-UNV1-S891 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| VMVL-7-W-J-R1-G-UNV1 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| PVML-3-J-R1-G-UNV1-S896 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| VMVL-3-J-R1-G-UNV1-S903 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| VMVL-7-2A-R1-G-UNV1-S891 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| VMVL-3-P-R1-G-UNV1-S891 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| VMVL-3-J-R1-G-UNV1 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
 Rochester Electronics | MC908GR16ACFAE | NXP Semiconductors | IC MCU HC08 8Bit 1 Core FLASH 16kB (16k x 8) 8MHz 48-QFP Tray RoHS : Compliant |
| 2,953 | |
| BB814E7801GR1HTSA1 | Infineon Technologies AG | Varactor Diode RoHS : Compliant |
| 60,000 | ||
| ICE5GR1680AGXUMA1 | Infineon Technologies AG | Off-Line Converter and Switch Flyback 12-SOP T/R RoHS : Compliant |
| 90 | ||
| IBM25PPC750FX-GR1033V | IBM | IBM25PPC750 - PowerPC 750FX RISC Microprocessor RoHS : Not Compliant |
| 15 | ||
IBM25PPC750FX-GR1033T | IBM | RISC Microprocessor, 32-Bit, 733MHz, CMOS, CBGA292 RoHS : Compliant |
| 21 | ||
| IBMPPC750FX-GR1023T | IBM | IBM25PPC750 - PowerPC 750FX RISC Microprocessor RoHS : Not Compliant |
| 1,135 | ||
| IBM25PPC750FL-GR1033V | IBM | IBM25PPC750 - PowerPC 750FL RISC Microprocessor RoHS : Not Compliant |
| 12 | ||
MC68HC908GR16MFA | Freescale Semiconductor | Microcontroller, 8-Bit, FLASH, 68HC08 CPU, 8.2MHz, HCMOS, PQFP48 RoHS : Not Compliant |
| 170 | ||
| MC908GR16ACFAE | Freescale Semiconductor | IC MCU HC08 8Bit 1 Core FLASH 16kB (16k x 8) 8MHz 48-QFP Tray RoHS : Compliant |
| 953 | ||
| MC908GR16AVFAER | Freescale Semiconductor | IC MCU HC08 8Bit 1 Core FLASH 16kB (16k x 8) 8MHz 48-QFP T/R RoHS : Compliant |
| 1,995 | ||
| MC68HC908GR16VFA | Motorola Mobility LLC | Microcontroller, 8-Bit, FLASH, 68HC08 CPU, 8MHz, HCMOS, PQFP48 RoHS : Not Compliant |
| 103 | ||
| MC908GR16ACFA | Motorola Mobility LLC | MC908GR - Microcontroller, 8-Bit, FLASH, 8MHz, HCMOS, PQFP48 RoHS : Not Compliant |
| 60 | ||
| UPA2750GR(1)-E1-A | Renesas Electronics Corporation | MOSFET N-Channel 30V 9A (Ta) 8-SOIC RoHS : Compliant |
| 5,000 | ||
| UPC1934GR-1JG-E1-A | Renesas Electronics Corporation | IC VOLT REG Transistor Driver Step-Down Buck 2 OUT 2.5V - 20V 16-SOP RoHS : Compliant |
| 2,500 | ||
| KW DMLN31.SG-6J6K-EBVF46FCBB46-8E8G-R18 | ams OSRAM Group | KW DMLN31.SG - SYNIOS P2720, White LED RoHS : Compliant |
| 270,000 | ||
 Sager | ACPLUGR1-E=418-ACPLUGR1E=418-T | Cincon Electronics Corporation | AC PLUG R1-E=418-ACPLUGR1E=418-TR10-EURO |
| 0 | |
| ACPLUGR1-U=418-ACPLUGR1-U | Cincon Electronics Corporation | AC PLUG R1-U=418-ACPLUGR1-U |
| 0 | ||
| HW7D-011GR1 | IDEC Corporation | IDEC Corporation HW Dual PB Op Mmnty Flsh/Flsh |
| 0 | ||
| HW7D-B21F2020-GR1 | IDEC Corporation | Pushbutton Switches HW Dual PB Intrlck Flsh/Flsh T RoHS : Compliant |
| 0 | ||
| HW7D-L11F1010H22G-GR1 | IDEC Corporation | Pushbutton Switches HW Dual PB w/PL Mmntry Flsh/Fl |
| 0 | ||
| HW7D-L12F1111Q4G-GR1 | IDEC Corporation | Pushbutton Switches HW Dual PB w/PL Mmntry Flsh/Ex RoHS : Compliant |
| 0 | ||
| HW7D-L12F2002Q8G-GR1 | IDEC Corporation | Pushbutton Switches HW Dual PB w/PL Mmntry Flsh/Ex RoHS : Compliant |
| 0 | ||
| HW7D-L21F1001Q2G-GR1 | IDEC Corporation | Pushbutton Switches HW Dual PB w/PL Intrlck Flsh/F RoHS : Compliant |
| 0 | ||
| HW7D-L21F1010Q4G-GR1 | IDEC Corporation | Pushbutton Switches HW Dual PB w/PL Intrlck Flsh/F RoHS : Compliant |
| 0 | ||
| HW7D-L22F2020H22G-GR1 | IDEC Corporation | Pushbutton Switches HW Dual PB w/PL Intrlck Flsh/E RoHS : Compliant |
| 0 | ||
| 44GR1MEGLFTB | TT electronics / BI Technologies | Trimmer Resistors - SMD 1/4W 1M Ohms 10% MULTI TURN |
| 0 | ||
| 45GR100LFTB | TT electronics / BI Technologies | Ceramic Composition Resistors 1/4W 100 Ohms 10% MULTI TURN RoHS : Unknown |
| 0 | ||
| VPX1E2ABGR1A2B | Honeywell Sensing and Control / MICRO SWITCH | Limit Switches 3mA 8.2VDC SPDT .5Nm Grn Open, Red Close |
| 0 | ||
| VDB2UXXB-PZCXX-1HX-XGR1 | Carling Technologies | Littelfuse SWITCH ROCKER | 0 | |||
| SVSGR-1717 | ABB Group | Conduit Fittings & Accessories |
| 0 | ||
 ComSIT USA | BB814E6327GR1 | Infineon Technologies AG | SILICON VARIABLE CAPCITANCE DIODE Variable Capacitance Diode RoHS : Compliant | 71,435 | ||
| S1GR100001 | PanJit Semiconductor | SURFACE MOUNT RECTIFIER Rectifier Diode, 1 Phase, 1 Element, 1A, 400V V(RRM), Silicon, DO-214AA RoHS : Compliant | 8,501 | |||
| 23GR10KT7 | TT electronics / BI Technologies | Potentiometer, Cermet, 0.25W, 10000ohm, 200V, 20% +/-Tol, -100,100ppm/Cel, 1818 RoHS : Not Compliant | 500 | |||
| 88E6083LGR1 | Marvell Technology Group Ltd | IC Ethernet Switch MII, RMII 10/100 Base-FX/T/TX RoHS : Not Compliant | 187 | |||
| APT25GR120BD15 | mct | Insulated Gate Bipolar Transistor, 75A I(C), 1200V V(BR)CES, N-Channel RoHS : Not Compliant | 130 | |||
| MC68908GR16M | NXP Semiconductors | Microcontroller, 16-bit, NXP RoHS : Not Compliant | 100 | |||
| DP7015GR100 | Bel Power Solutions | 15A DC-DC Intelligent dPOL DC-DC Regulated Power Supply Module, 1 Output, 82.5W, Hybrid RoHS : Compliant | 100 | |||
MC68908GR16MFJE | Freescale Semiconductor | 8-BIT MICROCONTROLLER Microcontroller, CMOS RoHS : Compliant | 100 | |||
| KMC908GR16MFA | Motorola Semiconductor Products | 8-BIT MICROCONTROLLER UNIT (MCU) Microcontroller, 8-Bit, FLASH, 8.2MHz, HCMOS, PQFP48 RoHS : Not Compliant | 80 | |||
| TGR110Q350NC | Halo Electronics Inc | TRANSFORMER MODULE Datacom Transformer, ETHERNET Application(s), 1CT:1CT RoHS : Compliant | 24 | |||
| TGR110Q350NCRL | Halo Electronics Inc | Datacom Transformer, ETHERNET Application(s), 1CT:1CT RoHS : Compliant | 8 | |||
 Interstate Connecting Components | IT4100GR10SL-3P | Glenair Inc | 0 | |||
| ITS4106GR16-12PB0 | Glenair Inc | 0 | ||||
| ITS41070GR18-11SF7 | Glenair Inc | 0 | ||||
| IT3100GR14S-5S | Glenair Inc | 0 | ||||
| IT3106GR12-5P | Glenair Inc | 0 | ||||
| IT4100GR12-5S-MB | Glenair Inc | 0 | ||||
| ITB41030GR14S-1S | Glenair Inc | 0 | ||||
| ITS4100GR10SL-4P | Glenair Inc | 0 | ||||
| ITS4100GR14S-07SM13F7 | Glenair Inc | 0 | ||||
| ITS4100GR14S-9SM15F7 | Glenair Inc | 0 | ||||
| ITS4106GR14S-2PM13F7 | Glenair Inc | 0 | ||||
| ITS4106GR14S-6PM15F7 | Glenair Inc | 0 | ||||
| ITS4106GR16-10P | Glenair Inc | 0 | ||||
| ITS4106GR16-11PF7 | Glenair Inc | RoHS : Compliant | 0 | |||
| ITS4106GR16-A10S | Glenair Inc | 0 | ||||
 PEI Genesis | GTC06GR16S-8S-LC | Amphenol Corporation |
| 47 | ||
| GH805GR158A163W1 | SOURIAU-SUNBANK |
| 0 | |||
| GH805GR158A62NWH | SOURIAU-SUNBANK |
| 0 | |||
| BVSGR-1717 | Microsemi Storage OTN and Networking Solutions (now Microchip) |
| 0 | |||
| ACS06PGR14S-2P-472 | Amphenol Corporation |
| 0 | |||
| SE20GR1437AL34 | SOURIAU-SUNBANK |
| 0 | |||
| CB6CGR13.5K06-22-14SWS | ITT Interconnect Solutions |
| 0 | |||
| CB8CGR13MSR-20A48PS | ITT Interconnect Solutions |
| 0 | |||
| MS27467T17B26P-CGR13.5MSR | SOURIAU-SUNBANK |
| 0 | |||
| CBV4CGR16MSS2-20-7PS | ITT Interconnect Solutions |
| 0 | |||
| SE30GR1716FRS3.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| GH805GR158A100NWH | SOURIAU-SUNBANK |
| 0 | |||
| MS3476W14-5S-CGR13.5MSA | Amphenol Aerospace |
| 0 | |||
| KJB6T15W19SN-CGR13.5TCA14 | ITT Interconnect Solutions |
| 0 | |||
| GH805GR100 | SOURIAU-SUNBANK |
| 0 | |||
 Chip 1 Exchange | S2G_R1_00001 | PanJit Semiconductor | INSTOCK RoHS : Compliant | 314,262 | ||
| RS1MWG_R1_00001 | PanJit Semiconductor | INSTOCK RoHS : Compliant | 116,846 | |||
| US1G_R1_00001 | PanJit Semiconductor | INSTOCK RoHS : Compliant | 5,278 | |||
| HDD09-04F-LGR1 | INSTOCK | 4,000 | ||||
| RS1G_R1_00001 | PanJit Semiconductor | INSTOCK RoHS : Compliant | 3,393 | |||
| LM2575GR-12-HTC | HTC Korea | INSTOCK | 3,309 | |||
| GS1G_R1_00001 | PanJit Semiconductor | INSTOCK RoHS : Compliant | 2,775 | |||
| 44GR100KLFT7 | INSTOCK | 884 | ||||
| BB814-E6327-GR1 | Infineon Technologies AG | INSTOCK | 694 | |||
| BB814-E6327-GR1 | INSTOCK | 619 | ||||
| GR-175063-002M1 | INSTOCK | 300 | ||||
| 430GR-101-103 | Bourns Inc | INSTOCK | 70 | |||
| ABKG_R1LP0408CSP-5SI B0 | Renesas Electronics Corporation | INSTOCK | 50 | |||
 Avnet Abacus | FG-R14-6A | KEMET Corporation | Current Sensor Open Loop Flux Gate 50mA to 50mA 475 V to 525 V Analogue Through Hole (Alt: FG-R14-6A) RoHS : Compliant | 0 | ||
| DP7015G-R100 | Bel Fuse | Non Isolated Board Mount DCDC Converter SMD Open Frame 825 W 700 mV 55 V 15 A 8V 14 V (Alt: DP7015G-R100) RoHS : Compliant | 0 | |||
| ERJB3CGR16V | Panasonic Electronic Components | - Tape and Reel (Alt: ERJB3CGR16V) RoHS : Compliant | 0 | |||
| ERJA1CGR13U | Panasonic Electronic Components | - Tape and Reel (Alt: ERJA1CGR13U) RoHS : Compliant | 0 | |||
| ERJ6BSGR16V | Panasonic Electronic Components | - Tape and Reel (Alt: ERJ6BSGR16V) RoHS : Compliant | 0 | |||
| ERJ2BSGR15X | Panasonic Electronic Components | - Tape and Reel (Alt: ERJ2BSGR15X) RoHS : Compliant | 0 | |||
| ERJB1CGR12U | Panasonic Electronic Components | - Tape and Reel (Alt: ERJB1CGR12U) RoHS : Compliant | 0 | |||
| ERJ12RSGR18U | Panasonic Electronic Components | - Tape and Reel (Alt: ERJ12RSGR18U) RoHS : Compliant | 0 | |||
| ERJ8BWGR100V | Panasonic Electronic Components | - Tape and Reel (Alt: ERJ8BWGR100V) RoHS : Compliant | 0 | |||
| ERJ14BSGR10U | Panasonic Electronic Components | - Tape and Reel (Alt: ERJ14BSGR10U) RoHS : Compliant | 0 | |||
| ERJ12RSGR12U | Panasonic Electronic Components | - Tape and Reel (Alt: ERJ12RSGR12U) RoHS : Compliant | 0 | |||
| ERJ14BSGR18U | Panasonic Electronic Components | - Tape and Reel (Alt: ERJ14BSGR18U) RoHS : Compliant | 0 | |||
| ERJ12RSGR15U | Panasonic Electronic Components | - Tape and Reel (Alt: ERJ12RSGR15U) RoHS : Compliant | 0 | |||
| GAGR100KM3499J15 | TE Connectivity | (Alt: GAGR100KM3499J15) RoHS : Compliant | 0 | |||
| MSP1BR5600GR10E3 | Vishay Intertechnologies | (Alt: MSP1BR5600GR10E3) RoHS : Compliant | 0 | |||
Avnet Asia | EYGR1818ZRX2 | Panasonic Electronic Components | GraphiteTIM PGS for IGBT Modules 180mm x 180mm x 0.35mm (Alt: EYGR1818ZRX2) RoHS : Compliant | 0 | ||
| GS1MWG_R1_00001 | PanJit Semiconductor | (Alt: GS1MWG_R1_00001) RoHS : Compliant | 0 | |||
| RS1MWG_R1_00001 | PanJit Semiconductor | (Alt: RS1MWG_R1_00001) RoHS : Compliant | 0 | |||
| EC21EUXGR-128-SGNS | Quectel Wireless Solutions Co Ltd | Cellular Module, GSM, LTE-FDD, WCDMA, 3.3V to 4.3V, 29mm x 32mm x 2.4mm (Alt: EC21EUXGR-128-SGNS) RoHS : Compliant | 0 | |||
| LRW0603WGR12GG001E | Johanson Technology Inc | JTILRW0603WGR12GG001E WIREWOUND INDUCTOR (Alt: LRW0603WGR12GG001E) RoHS : Compliant | 0 | |||
| EC25AUXGR-128-SGNS | Quectel Wireless Solutions Co Ltd | (Alt: EC25AUXGR-128-SGNS) RoHS : Compliant | 0 | |||
| KW DMLS33.SG-8M3-EBXDEBZB46-8E8G-R18-AL | ams OSRAM Group | (Alt: KW DMLS33.SG-8M3-EBXDEBZB46-8E8G-R18-AL) RoHS : Compliant | 0 | |||
| EYGR1818ZLX2 | Panasonic Electronic Components | GraphiteTIM PGS for IGBT Modules 180mm x 180mm x 0.25mm (Alt: EYGR1818ZLX2) RoHS : Compliant | 0 | |||
 Avnet Silica | GS1G_R1_00001 | PanJit Semiconductor | SMA1A400VGenPurp RectSMDGP (Alt: GS1G_R1_00001) RoHS : Compliant | 7,200 | ||
| US1KWG_R1_00001 | PanJit Semiconductor | Ultra Fast Recovery Rectifier 800V 1A 2Pin SMAW TR (Alt: US1KWG_R1_00001) RoHS : Compliant | 7,200 | |||
| TGR1G-S405N24LFTR | Halo Electronics Inc | SMD ISOLATION MODULE (Alt: TGR1G-S405N24LFTR) RoHS : Compliant | 220 | |||
| TGR110-E055N16LF | Halo Electronics Inc | HLOTGR110E055N16LF (Alt: TGR110-E055N16LF) RoHS : Compliant | 210 | |||
| ES2G_R1_00001 | PanJit Semiconductor | (Alt: ES2G_R1_00001) RoHS : Compliant | 0 | |||
| MC908GR16MFAE | NXP Semiconductors | MCU 8bit HC08 CISC 16KB Flash 33V5V 48Pin LQFP Tray (Alt: MC908GR16MFAE) RoHS : Compliant | 0 | |||
| APT70GR120JD60 | Microchip Technology Inc | (Alt: APT70GR120JD60) RoHS : Compliant | 0 | |||
| MURB3JG_R1_00001 | PanJit Semiconductor | (Alt: MURB3JG_R1_00001) RoHS : Compliant | 0 | |||
| MC68908GR16CFJE | NXP Semiconductors | 8 Bit MCU HC08 Family HC08GR Series Microcontrollers HC08 8 MHz 16 KB 32 Pins LQFP (Alt: MC68908GR16CFJE) RoHS : Compliant | 0 | |||
| TGR1G-Q505N24LF | Halo Electronics Inc | SMT24 Isolation transformer module (Alt: TGR1G-Q505N24LF) RoHS : Compliant | 0 | |||
| PJESDA6V8-4G _R1 _00001 | PanJit Semiconductor | (Alt: PJESDA6V8-4G_R1_00001) RoHS : Compliant | 0 | |||
| PJESDA5V6-5G _R1 _00001 | PanJit Semiconductor | (Alt: PJESDA5V6-5G_R1_00001) RoHS : Compliant | 0 | |||
| PJESDA6V8-5LCG _R1 _00001 | PanJit Semiconductor | (Alt: PJESDA6V8-5LCG_R1_00001) RoHS : Compliant | 0 | |||
| PJESDA5V6-5LCG _R1 _00001 | PanJit Semiconductor | PJTPJESDA5V65LCG R1 00001 (Alt: PJESDA5V6-5LCG_R1_00001) RoHS : Compliant | 0 | |||
| EC21EUXGR-128-SGNS/08A08-A0300A0300 | Quectel Wireless Solutions Co Ltd | FW EC21EUXGAR08A08M1GA0300A0300 (Alt: EC21EUXGR-128-SGNS) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AC-PLUG-R1-ASUE-G8711502020 | Cincon Electronics Corporation | PLUG KITS OF US, AU, UK, EU FOR TRG10R, TR30RV |
| 0 | |
| GD25Q64CSJGR-1 | GigaDevice Semiconductor (Beijing) Inc | Programmed GD25Q64CSJGR for Atlas |
| 0 | ||
 Component Electronics, Inc | EGR105M063T1A1C110 | Teapo Electronic Corporation | IN STOCK SHIP TODAY | 7,000 | ||
| R13-203AL1-01-BCGR1 | SCI | IN STOCK SHIP TODAY |
| 1,990 | ||
| EGR106M050S1A1C110 | Teapo Electronic Corporation | IN STOCK SHIP TODAY |
| 1,827 | ||
| EGR107M035T2A1G110 | Teapo Electronic Corporation | IN STOCK SHIP TODAY | 900 | |||
| EGR107M050T2A1G110 | Teapo Electronic Corporation | IN STOCK SHIP TODAY | 700 | |||
| 44GR1KLFT7 | TT electronics / BI Technologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 267 | ||
| 23GR10K-T7 | TT electronics / BI Technologies | IN STOCK SHIP TODAY |
| 180 | ||
| EGR107M025S1A1G110 | Teapo Electronic Corporation | IN STOCK SHIP TODAY |
| 163 | ||
| EGR107M025S1A1E110 | Teapo Electronic Corporation | IN STOCK SHIP TODAY | 100 | |||
| GR-1/8B | Festo | IN STOCK SHIP TODAY | 11 | |||
| GR108-PCB | Custom Connector Corporation | IN STOCK SHIP TODAY |
| 3 | ||
 DB Roberts | PGR10A | Essentra Components | RAISED FLANGE DISC ADHESIVEHDP | 0 | ||
| PGR1-1/4A | Essentra Components | RAISED FLANGE DISC ADHESIVEHDP | 0 | |||
| PGR1-1/2A | Essentra Components | RAISED FLANGE DISC ADHESIVEHDP | 0 | |||
| PGR1/2A | Essentra Components | RAISED FLANGE DISC ADHESIVEHDP | 0 | |||
| PGR1A | Essentra Components | RAISED FLANGE DISC ADHESIVEHDP | 0 | |||
| PGR12A | Essentra Components | RAISED FLANGE DISC ADHESIVEHDP | 0 | |||
 EBV Elektronik | MC908GR16CFAE | NXP Semiconductors | 8 Bit MCU HC08 Family HC08GR Series Microcontrollers HC08 8 MHz 16 KB 48 Pins LQFP (Alt: MC908GR16CFAE) RoHS : Compliant | 250 | ||
| APT85GR120L | Microchip Technology Inc | Trans IGBT Chip NCH 12KV 170A 3Pin TO264 (Alt: APT85GR120L) RoHS : Compliant | 0 | |||
| APT70GR120B2 | Microchip Technology Inc | (Alt: APT70GR120B2) RoHS : Compliant | 0 | |||
| APT85GR120B2 | Microchip Technology Inc | Trans IGBT Chip NCH 12KV 170A 3Pin TMAX (Alt: APT85GR120B2) RoHS : Compliant | 0 | |||
| MC908GR16VFAE | NXP Semiconductors | MCU 8bit HC08 CISC 16KB Flash 33V5V 48Pin LQFP Tray (Alt: MC908GR16VFAE) RoHS : Compliant | 0 | |||
| APT70GR120JD60 | Microchip Technology Inc | (Alt: APT70GR120JD60) RoHS : Compliant | 0 | |||
| APT85GR120JD60 | Microchip Technology Inc | (Alt: APT85GR120JD60) RoHS : Compliant | 0 | |||
| MC908GR16ACFAE | NXP Semiconductors | 8 Bit MCU HC08 Family HC08GR Series Microcontrollers (Alt: MC908GR16ACFAE) RoHS : Compliant | 0 | |||
| MC68908GR16CFJE | NXP Semiconductors | 8 Bit MCU HC08 Family HC08GR Series Microcontrollers HC08 8 MHz 16 KB 32 Pins LQFP (Alt: MC68908GR16CFJE) RoHS : Compliant | 0 | |||
| MC68908GR16VFJE | NXP Semiconductors | MCU 8bit HC08 CISC 16KB Flash 33V5V 32Pin LQFP (Alt: MC68908GR16VFJE) RoHS : Compliant | 0 | |||
| MC68908GR16MFJE | NXP Semiconductors | MCU 8bit HC08 CISC 16KB Flash 33V5V 32Pin LQFP Brick (Alt: MC68908GR16MFJE) RoHS : Compliant | 0 | |||
| ICE5GR1680AGXUMA1 | Infineon Technologies AG | ACDC Converter Non Isolated Flyback 105V to 24VAC In 125kHz 27W SOIC12 (Alt: SP001602160) RoHS : Compliant | 0 | |||
| CBT-90-WDLS-C11-GR150 | Luminus Devices | High Power LEDs (Alt: CBT-90-WDLS-C11-GR150) RoHS : Compliant | 0 | |||
 Flip Electronics | S908GR16AE0CFAER | NXP Semiconductors | Stock RoHS : Compliant | 2,000 | ||
| KC68908GR16MFJE | NXP Semiconductors | Stock, Ship Today |
| 800 | ||
| MC68908GR16MFJE | NXP Semiconductors | Stock RoHS : Compliant | 800 | |||
| MC68908GR16CFJE | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 459 | |||
| WGR1000B S LAAZ | Altera Corporation | Stock | 80 | |||
 Master Electronics | GR108-SLD | Custom Connector Corporation | Conn Relay Socket SKT 8 POS Solder ST Panel Mount RoHS : Not Compliant |
| 250 | |
| GR-15 | Tempo Communications Inc | GLOROD 15 RoHS : Compliant |
| 2 | ||
| HW7D-011GR1 | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| HW7D-B21F2020-GR1 | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| HW7D-L11F1010H22G-GR1 | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| HW7D-L12F1111Q4G-GR1 | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| HW7D-L12F2002Q8G-GR1 | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| HW7D-L21F1001Q2G-GR1 | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| HW7D-L21F1010Q4G-GR1 | IDEC Corporation | Pushbutton Switch - SPST - 10A 24VDC - 2 x Rectangular Flush Buttons - Green/Red Cap - Green LED - Interlocking - IP40/IP65 - Screw - Panel Mount. RoHS : Compliant |
| 0 | ||
| HW7D-L22F2020H22G-GR1 | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| SVSGR-1717 | Thomas & Betts | PMAFIX Connection Splice - Conduit Size NW17 - Material Polyamide 6 - Color Grey - Overall Length 87.0mm - IP68 RoHS : Compliant |
| 0 | ||
| HW7D-B21F2002-GR1 | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| HW7D-L11F1001H22G-GR1 | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| HW7D-L12F2020Q2G-GR1 | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| HW7D-L21F1010Q8W-GR1 | IDEC Corporation | RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C8813/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8813/GR-12, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8813/GR-12 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax. |
| 983 | |
| PE3C8746/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8746/GR-12, can also be known as a 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8746/GR-12 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax. |
| 105 | ||
| PE3C8818/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-120, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-120 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8748/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-GR, RF Cable Type: Belden 4855R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4855R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4855R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4855R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/GR-12, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/GR-12 is built with belden 4855R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/GR-12 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4855R-GR coax. |
| 89 | ||
| PE3C8748/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-GR, RF Cable Type: Belden 4855R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4855R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/GR-120, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/GR-120 is built with belden 4855R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/GR-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-GR coax. |
| 89 | ||
| PE3C8743/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8743/GR-120, can also be known as a 12G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8743/GR-120 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8743/GR-120 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax. |
| 57 | ||
| PE3C8746/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8746/GR-120, can also be known as a 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8746/GR-120 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax. |
| 57 | ||
| PE3C8749/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-GR, RF Cable Type: Belden 4855R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4855R-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 12 inch length using 75 Ohm 4855R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 12 inch length using 75 Ohm 4855R-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 12G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8749/GR-12, can also be known as a 12G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8749/GR-12 is built with belden 4855R-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 12 inch length using 75 Ohm 4855R-GR coax. |
| 51 | ||
| PE3C8744/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8744/GR-120, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8744/GR-120 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax. |
| 0 | ||
| PE3C0847/HSGR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to TNC Male Low Loss Cable 12 Inch Length Using PE-P142LL Coax., Radio frequency assembly SMA male to TNC male low loss cable 12 inch length using PE-P142LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male low loss cable 12 inch length using PE-P142LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our low loss SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0847/HSGR-12 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C0847/HSGR-12 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0847/HSGR-12 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male low loss cable 12 inch length using PE-P142LL coax. |
| 0 | ||
| PE3C8745/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8745/GR-12, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8745/GR-12 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8745/GR-12 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax. |
| 0 | ||
| PE3C8744/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8744/GR-12, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8744/GR-12 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax. |
| 0 | ||
| PE3C8742/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8742/GR-12, can also be known as a 12G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8742/GR-12 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8742/GR-12 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax. |
| 0 | ||
| PE3C8814/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/GR-12, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/GR-12 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/GR-12 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax. |
| 0 | ||
| PE3C8742/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8742/GR-120, can also be known as a 12G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8742/GR-120 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8742/GR-120 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax. |
| 0 | ||
 Venkel Ltd. | CTL1206FGR1T | VENKEL LTD | Chip Type LED;1206;Flat Lens;Green(Yellow Green) RoHS : Compliant | 27,000 | ||
| CTL1206RGR1T | VENKEL LTD | Chip Type LED;1206;Right Angle Lens;Green(Yellow Green) RoHS : Compliant | 18,000 | |||
| CTL352819FGR1T | VENKEL LTD | Chip Type LED;352819;Flat Lens;Green RoHS : Compliant | 16,000 | |||
| CTL0805FGR1T | VENKEL LTD | Chip Type LED;0805;Flat Lens;Green(Yellow Green) RoHS : Compliant | 16,000 | |||
| MCL0603FRD1GR1T | VENKEL LTD | Multi-Color LED;0603;Flat Lens;Red;Green(Yellow Green) RoHS : Compliant | 4,000 | |||
| THL0304DGR1B | VENKEL LTD | Through Hole LED;0304;Dome Lens;Green RoHS : Not Compliant | 0 | |||
| MCL0805FRD1GR1T | VENKEL LTD | Multi-Color LED;0805;Flat Lens;Red;Green RoHS : Compliant | 0 | |||
| CTL0402FGR1T | VENKEL LTD | Chip Type LED;0402;Flat Lens;Green RoHS : Compliant | 0 | |||
| MCLA30RRD1GR1B | VENKEL LTD | 3.0mm Round Red; Green LED Array RoHS : Not Compliant | 0 | |||
| CTL1204RGR1T | VENKEL LTD | Chip Type LED;1204;Right Angle Lens;Green(Yellow Green) RoHS : Compliant | 0 | |||
| CTL0402FGR1T-L | VENKEL LTD | Chip Type LED;0402;Flat Lens;Green(Yellow Green);Low Profile RoHS : Compliant | 0 | |||
| CTL0603FGR1T | VENKEL LTD | Chip Type LED;0603;Flat Lens;Green(Yellow Green) RoHS : Compliant | 0 | |||
| CTL0201FGR1T | VENKEL LTD | Chip Type LED;0201;Flat Lens;Yellow Green RoHS : Compliant | 0 | |||
| MCL1204RRD1GR1T | VENKEL LTD | Multi-Color LED;1204;Right Angle Lens;Red;Green RoHS : Compliant | 0 | |||
| CTL0603DGR1T | VENKEL LTD | Chip Type LED;0603;Dome Lens;Green(Yellow Green) RoHS : Compliant | 0 | |||
 Vyrian | SPM1804CYGR199 | Alpha Wire | Wire And Cable, 4 Conductor(s), 18AWG, 1000V, Tray Cable RoHS : Compliant | 12,712 | ||
| GR103J1K | Littelfuse Inc | NTC Thermistor, 10000ohm, Through Hole Mount RoHS : Unknown | 9,557 | |||
2PC1815GR,116 | NXP Semiconductors | Small Signal Bipolar Transistor, 0.15A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon, TO-92 | 9,286 | |||
| SGR117AT/883B | Microchip Technology Inc | Adjustable Positive Standard Regulator, 1.22V Min, 1.275V Max, BIPolar, MBCY3 RoHS : Not Compliant | 8,506 | |||
| G3VM-61GR1(TR) | OMRON Corporation | Transistor Output SSR, 1-Channel, 1500V Isolation RoHS : Compliant | 7,576 | |||
| RGR1551-ST | Broadcom Limited | RoHS : Not Compliant | 7,321 | |||
| APT50GR120L | Microchip Technology Inc | Insulated Gate Bipolar Transistor, 117A I(C), 1200V V(BR)CES, N-Channel RoHS : Compliant | 6,094 | |||
| G3VM-61GR1 | OMRON Corporation | Transistor Output SSR, 1-Channel, 1500V Isolation RoHS : Compliant | 4,731 | |||
| APT70GR120B2 | Microchip Technology Inc | Insulated Gate Bipolar Transistor, 160A I(C), 1200V V(BR)CES, N-Channel RoHS : Compliant | 4,343 | |||
| APT25GR120BD15 | Microchip Technology Inc | Insulated Gate Bipolar Transistor, 75A I(C), 1200V V(BR)CES, N-Channel RoHS : Compliant | 4,186 | |||
| APT40GR120S | Microchip Technology Inc | Insulated Gate Bipolar Transistor, 88A I(C), 1200V V(BR)CES, N-Channel RoHS : Compliant | 2,532 | |||
| APT70GR120JD60 | Microsemi Corporation (now Microchip) | Insulated Gate Bipolar Transistor, 112A I(C), 1200V V(BR)CES, N-Channel RoHS : Compliant | 833 | |||
| APT85GR120JD60 | Microsemi Corporation (now Microchip) | Insulated Gate Bipolar Transistor, 116A I(C), 1200V V(BR)CES, N-Channel RoHS : Not Compliant | 780 | |||
| FIT-221V-3/64GR103 | Alpha Wire | HEAT SHRINK TUBE, POLYOLEFIN, 1.168 ID Before Shrink, 2:1 Shrink Ratio, GREEN RoHS : Compliant | 544 | |||
| FIT-221-1/4GR103 | Alpha Wire | HEAT SHRINK TUBE, POLYOLEFIN, 6.35 ID Before Shrink, 2:1 Shrink Ratio, GREEN RoHS : Compliant | 251 | |||
 Win Source Electronics | UF2G-R1-00001 | PanJit Semiconductor |
| 75,030 | ||
| ER2G_R1_00001 | PanJit Semiconductor | SMB, SUPER / Diode Standard 400 V 2A Surface Mount SMB (DO-214AA) RoHS : Compliant |
| 9,090 | ||
| G3VM-81GR1 | OMRON Corporation | MOS FET Relays | SSR RELAY SPST-NO 200MA 0-80V RoHS : Compliant |
| 2,300 | ||
| EC25EUXGR-128-SGNS | Quectel Wireless Solutions Co Ltd | RF TXRX MOD CELL/NAV CARD EDGE / Transceiver Module |
| 1,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand