| Electronic Components Datasheet Search |
|
S18FDJ-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Master Electronics | 202K174-25/225-CS-1858-0 | TE Connectivity | 202K174-25/225-CS-1858-0 RoHS : Compliant |
| 128 | |
| RAS18-8X | Thomas & Betts | Sta-Con® Heat Shrinkable Ring Terminal - Wire Range #22-#18AWG - Material Copper - Tin-Plated Finish - Color Red - Bolt Hole #8 - Voltage Rating 600V RoHS : Compliant |
| 70 | ||
| NAS1831H4C04 | RAF Electronic Hardware | RoHS : Compliant |
| 60 | ||
| CCS-18S180-T | Teledyne Coax Switches | RF Switch Commercial DC-12GHz SMA Failsafe SP8T TTL RoHS : Compliant |
| 2 | ||
| IDSS-18-S-18.00 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| NAS1829A6E28 | RAF Electronic Hardware | RoHS : Compliant |
| 0 | ||
| NAS1831A4B20 | RAF Electronic Hardware | RoHS : Compliant |
| 0 | ||
| NAS1831AC4B03 | RAF Electronic Hardware | Standoff FEMALE RoHS : Compliant |
| 0 | ||
| 983-0S-18-02-P6 | TE Connectivity | 983-0S 18-02 P6 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 983-0WS-18-08-PN-L | TE Connectivity | 983-0WS 18-08 PN-L MOQ Reduction RoHS : Compliant |
| 0 | ||
| 983-6RS-18-02-PN-L-A1325 | TE Connectivity | 983-6RS 18-02 PN-L A1325 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 983-6RS-18-02-SN-L | TE Connectivity | 983-6RS 18-02 SN-L MOQ Reduction RoHS : Compliant |
| 0 | ||
| ATS-HP-F8L350S18W-423 | Advanced Thermal Solutions Inc | High-Performance Flat Heat Pipe 350 x 10.35 x 4.5 mm copper sintered wick RoHS : Compliant |
| 0 | ||
| AIS18N08AN024-2M | Altech Corporation | SENSOR-M18-S8.0-NF-1030VDC 250MA-NPN-NO-2M CABLE | Altech Corp AIS18N08AN024-2M RoHS : Compliant |
| 0 | ||
| S18211TC4L1 | Woodhead Molex | Molex Connector - 182 - PG11 RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | MLG1005S18NJT000 | TDK Corporation | - Tape and Reel (Alt: MLG1005S18NJT000) RoHS : Compliant |
| 30,000 | |
| LS4148-GS18 | Vishay Intertechnologies | - Tape and Reel (Alt: LS4148-GS18) RoHS : Compliant |
| 10,000 | ||
| MPZ1608S181ATDH5 | TDK Corporation | - Tape and Reel (Alt: MPZ1608S181ATDH5) RoHS : Compliant |
| 8,000 | ||
| ECS-184-18-5PX-TR | ECS International Inc | - Tape and Reel (Alt: ECS-184-18-5PX-TR) RoHS : Compliant |
| 5,000 | ||
| SQS180ENW-T1_GE3 | Vishay Intertechnologies | Automotive N-Channel 40 V (D-S) 175C MOSFET PowerPAK 1212-8SLW - Tape and Reel (Alt: SQS180ENW-T1_GE3) RoHS : Not Compliant |
| 3,000 | ||
| RWR80S1821FRS70 | Vishay Intertechnologies | Through Hole Resistor, 1.82 kohm, RWR Series, 2 W, ? 1%, Axial Leaded, Wirewound, ? 20ppm/?C - Tape and Reel (Alt: RWR80S1821FRS70) RoHS : Not Compliant |
| 1,000 | ||
| RL20S182GRE5 | Vishay Intertechnologies | - Tape and Reel (Alt: RL20S182GRE5) RoHS : Not Compliant |
| 500 | ||
| ECS-18-13-1X | ECS International Inc | - Bulk (Alt: ECS-18-13-1X) RoHS : Compliant |
| 491 | ||
| RL181S-182J-RC | Bourns Inc | - Bulk (Alt: RL181S-182J-RC) RoHS : Compliant |
| 300 | ||
MCP23S18-E/MJ![]() | Microchip Technology Inc | - Rail/Tube (Alt: MCP23S18-E/MJ) RoHS : Compliant |
| 273 | ||
| RWR84S1820FSBSL | Vishay Intertechnologies | - Bulk (Alt: RWR84S1820FSBSL) RoHS : Not Compliant |
| 100 | ||
| ECS-184-18-4X | ECS International Inc | - Bulk (Alt: ECS-184-18-4X) RoHS : Compliant |
| 100 | ||
| RWR81S1870FRB12 | Vishay Intertechnologies | Through Hole Resistor, 187 ohm, RWR Series, 1 W, ? 1%, Axial Leaded, Wirewound, ? 20ppm/?C - Bulk (Alt: RWR81S1870FRB12) RoHS : Not Compliant |
| 75 | ||
| A8504952S18W | Amphenol Corporation | - Bulk (Alt: A8504952S18W) RoHS : Not Compliant |
| 1 | ||
| REF60W1ZVS186EMTOBO2 | Infineon Technologies AG | REF60W1ZVS186EMTOBO2 - Boxed Product (Development Kits) (Alt: REF60W1ZVS186EMTOBO2) RoHS : Not Compliant |
| 1 | ||
![]() Newark | DS1811R-15+T&R | Analog Devices Inc | Mpu Supervisor, 5.5V, Sot-23-3; |Analog Devices, Inc. DS1811R-15+T&R RoHS : Compliant |
| 2,002 | |
| DS1811R-15+T&R | Analog Devices Inc | Mpu Supervisor, 5.5V, Sot-23-3; |Analog Devices, Inc. DS1811R-15+T&R RoHS : Compliant |
| 2,002 | ||
| DS1822+PAR | Analog Devices Inc | Temperature Sensor, 3Deg C, To-92-3; |Analog Devices, Inc. DS1822+PAR RoHS : Compliant |
| 1,822 | ||
| DS1818-10+ | Analog Devices Inc | Mpu Supervisor, Econoreset, 85Deg C; |Analog Devices, Inc. DS1818-10+ RoHS : Compliant |
| 1,004 | ||
| A785KS187M1VLAS032 | KEMET Corporation | Cap, Alu Elec, Hybrid, 180Uf, 35V, Smd; |Kemet A785KS187M1VLAS032 RoHS : Compliant |
| 370 | ||
| A785KS187M1VLAS032 | KEMET Corporation | Cap, Alu Elec, Hybrid, 180Uf, 35V, Smd; |Kemet A785KS187M1VLAS032 RoHS : Compliant |
| 370 | ||
| DS1856B-050+ | Analog Devices Inc | Digital Pot, 50K, Dual, Csbga-16; |Analog Devices, Inc. DS1856B-050+ RoHS : Compliant |
| 232 | ||
ABLS-18.432MHZ-20-B-3-H-T![]() | Abracon Corporation | Crystal, 18.432Mhz, 20Pf, Smd, Hc/49Us; |Abracon ABLS-18.432MHZ-20-B-3-H-T RoHS : Compliant |
| 122 | ||
ABLS-18.432MHZ-20-B-3-H-T![]() | Abracon Corporation | Crystal, 18.432Mhz, 20Pf, Smd, Hc/49Us; |Abracon ABLS-18.432MHZ-20-B-3-H-T RoHS : Compliant |
| 122 | ||
| QT532S-18.432MBBK-T | TXC Corporation | Xtal, 18.432Mhz, Smd, 5Mm X 3.2Mm; |Txc QT532S-18.432MBBK-T RoHS : Not Compliant |
| 100 | ||
| QT532S-18.432MBBK-T | TXC Corporation | Xtal, 18.432Mhz, Smd, 5Mm X 3.2Mm; |Txc QT532S-18.432MBBK-T RoHS : Not Compliant |
| 100 | ||
ABLS-18.432MHZ-20-B-3-H-T![]() | Abracon Corporation | Crystal, 18.432Mhz, 20Pf, Smd, Hc/49Us; |Abracon ABLS-18.432MHZ-20-B-3-H-T RoHS : Compliant |
| 25 | ||
ABLS-18.432MHZ-20-B-3-H-T![]() | Abracon Corporation | Crystal, 18.432Mhz, 20Pf, Smd, Hc/49Us; |Abracon ABLS-18.432MHZ-20-B-3-H-T RoHS : Compliant |
| 25 | ||
| NAS1831H4C04 | RAF Electronic Hardware | Nylon 1/4 Hex Female Standoff 1/4 Long,6; |Raf Electronic Hardware NAS1831H4C04 RoHS : Not Compliant |
| 6 | ||
| QS18VP6FF150Q8 | Banner Engineering Corp | Photoelectric Sensor, 150Mm, Pnp, 30Vdc; Sensing Method:Fixed Field; Product Range:Qs18 Series; Connection Method:M12 Connector; Supply Voltage Min:10V; Supply Voltage Max:30V; Sensing Range Max:150Mm; Sensor Output Type:Pnp Rohs Compliant: Yes RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | DS1856B-050+ | Analog Devices Inc | Dual, Temperature-Controlled R RoHS : Compliant |
| 75,786 | |
| DS1813-15+ | Analog Devices Inc | 5V EconoReset with Pushbutton RoHS : Compliant |
| 49,729 | ||
| DS1819AR-5+T&R | Analog Devices Inc | 5 Volt and 3.3 Volt MicroMonit RoHS : Compliant |
| 22,147 | ||
| DS1812R-15+T&R | Analog Devices Inc | 5V EconoReset with Active High RoHS : Compliant |
| 21,000 | ||
| DS1882E-050+ | Analog Devices Inc | Dual Log Audio Digital Potenti RoHS : Compliant |
| 18,049 | ||
| DS1811R-15+T&R | Analog Devices Inc | 5V EconoReset with Open Drain RoHS : Compliant |
| 12,376 | ||
| LTC2326CMS-18#PBF | Analog Devices Inc | 18-B, 250ksps, ±10.24V True Bi RoHS : Compliant |
| 9,665 | ||
| DS1830AU+ | Analog Devices Inc | Reset Sequence Pushbutton RoHS : Compliant |
| 1,806 | ||
| DS1851E-010+ | Analog Devices Inc | Dual Temperature-Controlled NV RoHS : Compliant |
| 1,310 | ||
| DS1831S+ | Analog Devices Inc | Multisupply MicroMonitor™ RoHS : Compliant |
| 1,200 | ||
| DS1876T+ | Analog Devices Inc | SFP Controller with Dual LDD I RoHS : Compliant |
| 645 | ||
| DS1804U-050+T&R | Analog Devices Inc | Nonvolatile Trimmer Potentiome RoHS : Compliant |
| 446 | ||
| DS1803E-010+T&R | Analog Devices Inc | Addressable Dual Digital Poten RoHS : Compliant |
| 100 | ||
| DS1847B-010+ | Analog Devices Inc | Dual Temperature-Controlled NV RoHS : Compliant |
| 0 | ||
| DS1816R-5-U+ | Analog Devices Inc | 3.3V EconoReset with Open Drai RoHS : Compliant | 0 | |||
![]() RS | QS18VP6FF150Q8 | Banner Engineering Corp | PHOTOELECTRIC SENSOR, FIXED FIELD, 150MM, 10-30VDC, PNP, QD, QS18 SERIES |
| 30 | |
| QS18VN6FF50 (71637) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, FIXED FIELD, 50MM, 10-30VDC, NPN, CABLE, QS18 |
| 20 | ||
| QS18VP6LD (73040) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, LASER DIFFUSE, 300MM, 10-30VDC, PNP, CABLE, QS18 |
| 13 | ||
| S8VS-18024A (S8VS18024A) | OMRON Industrial Automation | AC-DC POWER SUPPLY, 24V, 7.5A, 85-264V, ENCLOSED, PFC, 180W, S8VS SERIES |
| 8 | ||
| CLS1840FB-A | Marinco Electrical Group | CLS SERIES INLINE BALLNOSE (400A / 600V) 2/0 - 4/0 AWG FEMALE - BLACK (A) |
| 5 | ||
| S18DLGRXN (25827) | Banner Engineering Corp | S18 DAYLIGHT VISIBLE EZ-LIGHT - 18 MM -IP67 TWO EZ-LIGHT S18L SERIES |
| 4 | ||
| QS186LE12Q8 (02759) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, LASER CLASS 1, 15M, 10-30VDC, QD, QS18 |
| 3 | ||
| QS18VN6LVQ8 (66453) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, RETRO, 6.5M, 10-30VDC, NPN, QD, QS18 |
| 3 | ||
| QS18EN6XLPCQ5 | Banner Engineering Corp | PHOTOELECTRIC SENSOR, CLEAR OBJECT, 3M, 10-30VDC, NPN, QD, QS18 |
| 2 | ||
| QS18VN6DB (61663) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, DIFFUSE, 450MM, 10-30VDC, NPN, CABLE, QS18 |
| 2 | ||
| S18DLGXXPT (31663) | Banner Engineering Corp | S18 DAYLIGHT VISIBLE EZ LIGHT - 18 MM -IP67 SIN EZ-LIGHT S18L SERIES |
| 1 | ||
| QS18EN6CV45 (68743) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, CONVERGENT, 43MM, 10-30VDC, NPN, CABLE, QS18 |
| 1 | ||
| QS18AP6LP-93092 (93092) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, POLARIZED RETRO, 3.5M, 10-30VDC, PNP, QD, QS18 SERIES |
| 1 | ||
| ACS180-04S-02A4-2 (3AXD50000857388) | ABB Group | AC DRIVE, 3-PHASE, 200-240V, 0.5HP, FRAME R0, ACS311, ACS310 SERIES |
| 1 | ||
| S18 | Klein Tools Inc | 9/16" HOLLOW SHANK NUT DRIVER; 4" SHANK |
| 0 | ||
![]() STMicroelectronics | LD1117AS18TR![]() | STMicroelectronics | Low drop fixed and adjustable positive voltage regulators RoHS : Compliant |
| 12,392 | |
LD1117S18CTR![]() | STMicroelectronics | Adjustable and fixed low drop positive voltage regulator RoHS : Compliant |
| 6,022 | ||
TS1852AIST![]() | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 3,963 | ||
LD1117S18TR![]() | STMicroelectronics | LOW DROP FIXED POSITIVE VOLTAGE REGULATOR RoHS : Compliant |
| 341 | ||
L78S18CV![]() | STMicroelectronics | positive voltage regulator RoHS : Compliant |
| 133 | ||
LFTVS18-1F3![]() | STMicroelectronics | 20 A - 8/20 ?s, 12 V TVS in CSP P 0.4 mm RoHS : Compliant |
| 0 | ||
TS1874IPT![]() | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
TS1871ILT![]() | STMicroelectronics | 1.8V Input/Output Rail-to-Rail Low Power Operational Amplifiers RoHS : Compliant |
| 0 | ||
TS1874IYDT![]() | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
TS1872AIST![]() | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
TS1871IDT![]() | STMicroelectronics | 1.8V Input/Output Rail-to-Rail Low Power Operational Amplifiers RoHS : Compliant |
| 0 | ||
TS1871AIYLT![]() | STMicroelectronics | 1.8V Input/Output Rail-to-Rail Low Power Operational Amplifiers RoHS : Compliant |
| 0 | ||
TS1854IPT![]() | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
TS1874AIYPT![]() | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
TS1874AIDT![]() | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
![]() Microchip Technology Inc | MCP1826S-1802E/AB![]() | Microchip Technology Inc | 1.0A LDO, TO-220, Projected EOL: 2036-09-05 RoHS : Compliant |
| 18,340 | |
| MCP1755S-1802E/MC | Microchip Technology Inc | 16v, 300 mA low quiescent current LDO with shutdown, DFN, Projected EOL: 2040-12-26 RoHS : Compliant |
| 17,100 | ||
MCP1825S-1802E/AB![]() | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, TO-220, Projected EOL: 2036-09-05 RoHS : Compliant |
| 15,150 | ||
| MCP1825S-1802E/DBVAO | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, SOT-223, Projected EOL: 2051-01-09 RoHS : Compliant |
| 13,182 | ||
MCP1826S-1802E/EB![]() | Microchip Technology Inc | 1.0A LDO, DDPAK, Projected EOL: 2036-09-05 RoHS : Compliant |
| 10,900 | ||
MCP1827S-1802E/EB![]() | Microchip Technology Inc | 1.5A LDO Regulator, DDPAK, Projected EOL: 2036-09-06 RoHS : Compliant |
| 9,850 | ||
MCP1825S-1802E/EB![]() | Microchip Technology Inc | 500MA LOW VOLTAGE, LOW IQ LDO, DDPAK, Projected EOL: 2036-09-05 RoHS : Compliant |
| 4,100 | ||
MCP1826S-1802E/DB![]() | Microchip Technology Inc | 1.0A LDO, SOT-223, Projected EOL: 2036-09-05 RoHS : Compliant |
| 3,869 | ||
MCP23S18T-E/MJ![]() | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with I2C Interface, QFN, Projected EOL: 2036-10-02 RoHS : Compliant |
| 1,035 | ||
MCP1827S-1802E/AB![]() | Microchip Technology Inc | 1.5A LDO Regulator, TO-220, Projected EOL: 2036-09-06 RoHS : Compliant |
| 1,000 | ||
MCP23S18-E/SP![]() | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with 12C Interface, SPDIP, Projected EOL: 2036-09-30 RoHS : Compliant |
| 420 | ||
| AC31S18A | Microchip Technology Inc | AVR Programming Adapter, Projected EOL: |
| 280 | ||
MCP23S18-E/SO![]() | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with 12C Interface, SOIC, Projected EOL: 2036-09-30 RoHS : Compliant |
| 242 | ||
MCP23S18-E/MJ![]() | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with I2C Interface, QFN, Projected EOL: 2036-10-02 RoHS : Compliant |
| 118 | ||
MCP1825S-1802E/DB![]() | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, SOT-223, Projected EOL: 2036-09-05 RoHS : Compliant |
| 58 | ||
![]() Bisco Industries | NAS1801-3-36 | Heartland Precision Fasteners Inc | 5,125 | |||
| NAS1831C5C26 | RAF Electronic Hardware | 424 | ||||
| NAS1830B13B02 | NAS SPACERS/STANDOFFS/HANDLES | 100 | ||||
| NAS1831C5C26 | NEW SURPLUS CELL 12 | 91 | ||||
| NAS1831H4C04 | RAF Electronic Hardware | 78 | ||||
| NAS1831AC3A05 | RAF Electronic Hardware | 66 | ||||
| NAS1802-04-10 | B&B Specialties Inc | 43 | ||||
| NAS1831A3B03 | NAS SPACERS/STANDOFFS/HANDLES | 43 | ||||
| NAS1831A3A8 | NAS SPACERS/STANDOFFS/HANDLES | 26 | ||||
| NAS1829C4C11 | NAS SPACERS/STANDOFFS/HANDLES | 15 | ||||
| NAS1831A3B03 | RAF Electronic Hardware | 13 | ||||
| NAS1831AC4B03 | RAF Electronic Hardware | 8 | ||||
| NAS1801-06-11 | NAS HEX CAP SCREWS | 4 | ||||
| NAS1801-06-11 | Pilgrim Screw Corporation | 2 | ||||
| NAS1831C4B28 | RAF Electronic Hardware | 1 | ||||
![]() Rochester Electronics | NCP59301DS18R4G | onsemi | IC VOLT REG Fixed 1 REG 1.8V 3A TO-263-6 T/R RoHS : Compliant |
| 656 | |
| MB96F386RSCPMC-GS-185E2 | Infineon Technologies AG | MB96F386RSCPMC - MB96380 Series - F2 MC-16FX 16-bit Proprietary Microcontroller |
| 1,074 | ||
| DS1830AU+ | Analog Devices Inc | Supervisory Circuit 2.55V, 2.88V, 3.06V 8-SOP Tube RoHS : Compliant |
| 600 | ||
LP3965ES-1.8![]() | Texas Instruments | Fixed Positive LDO Regulator, 1.8V, 0.7V Dropout, BICMOS, PSSO5 RoHS : Not Compliant |
| 7,740 | ||
LP3872ES-1.8![]() | Texas Instruments | Fixed Positive LDO Regulator, 1.8V, 0.55V Dropout, PSSO5 RoHS : Not Compliant |
| 11,800 | ||
| DS1804Z-100 | Maxim Integrated Products | Pot Digital 1 Element 100 POS 100 kOhm 2.7V ±20% 8-SOIC Tube RoHS : Not Compliant |
| 7 | ||
DS1811-15/T&R![]() | Maxim Integrated Products | Supervisory Circuit 4.13V TO-226-3 T/R RoHS : Not Compliant |
| 2,000 | ||
DS1813-10![]() | Maxim Integrated Products | Supervisory Circuit 4.35V TO-226-3 Bag RoHS : Not Compliant |
| 4,906 | ||
DS1813-15+![]() | Maxim Integrated Products | Supervisory Circuit 4.13V TO-226-3 Bag RoHS : Compliant |
| 6,696 | ||
DS1813R-5-U![]() | Maxim Integrated Products | 5V Econoreset With Pushbutton RoHS : Not Compliant |
| 2,705 | ||
DS1830AU+![]() | Maxim Integrated Products | Supervisory Circuit 2.55V, 2.88V, 3.06V 8-SOP Tube RoHS : Compliant |
| 820 | ||
DS1847B-010+![]() | Maxim Integrated Products | Pot Digital 2 Element 256 POS 10 kOhm 3V ±20% 16-BGA Tray RoHS : Compliant |
| 745 | ||
DS1855B-050![]() | Maxim Integrated Products | Digital Potentiometer, 2 Func, 50000ohm, 2-wire Serial Control Interface, 256 Positions, PBGA16 RoHS : Not Compliant |
| 2,920 | ||
| DS1867SN-050/TR/ | Maxim Integrated Products | DS1867 Dual Digital Potentiometer With Eeprom RoHS : Not Compliant |
| 2,000 | ||
| LP3965ES-1.8 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 1.8V, 0.7V Dropout, BICMOS, PSSO5 RoHS : Not Compliant |
| 2,553 | ||
![]() Sager | RAS18-8X | ABB Group | Fixed Terminal Blocks |
| 0 | |
| RDS180A-24-12 | TDK-Lambda Corporation | Isolated DC/DC Converters - Chassis Mount DC-DC, 18-32VDC, Output 12V 15A, 180W | 0 | |||
| 59HS18-01-10-02N | Grayhill Inc | Rotary Switches RoHS : Compliant | 0 | |||
| 59HS18-03-1-17N | Grayhill Inc | Rotary Switches Rotary Switch, Military, shaft/panel seal, 18°, 3 deck, 1 pole/deck, 17 position/pole, non-shorting RoHS : Compliant | 0 | |||
| 59HS18-04-1-16N | Grayhill Inc | Rotary Switches ElectricalSwitch Rotary NotOver5Amp RoHS : Compliant |
| 0 | ||
| ATS-HP-F8L350S18W-423 | Advanced Thermal Solutions Inc | Liquid Cold Plates, Liquid Cooling & Heat Pipes Heat Pipe, Copper, High Performance, Flat, 350x10.35x4.5mm |
| 0 | ||
ATS-18A-105-C3-R1![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,SUPER FINE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 |
| 0 | ||
ATS-18A-117-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 |
| 0 | ||
ATS-18A-131-C1-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM |
| 0 | ||
| ATS-18A-136-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 |
| 0 | ||
ATS-18A-142-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:LEFT-TABBED,BLUE,T412 RoHS : Compliant |
| 0 | ||
ATS-18A-155-C1-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:LEFT-TABBED,BLUE,NO TIM |
| 0 | ||
| ATS-18A-161-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:LEFT-TABBED,BLUE,T766 |
| 0 | ||
ATS-18A-166-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 |
| 0 | ||
ATS-18A-179-C1-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM |
| 0 | ||
![]() Coilcraft Direct | 0805LS-182XJRC | Coilcraft Inc | RF inductor, ferrite core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 28,438 | |
| 0302CS-18NXJRW | Coilcraft Inc | RF inductor, ceramic core, 5/10% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 20,441 | ||
| 0603LS-182XJRC | Coilcraft Inc | RF inductor, ferrite core, 5% tol, SMT, RoHS Halogen Free R RoHS : Compliant |
| 10,025 | ||
| 1008CS-181XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 7,518 | ||
| 1008LS-182XJRC | Coilcraft Inc | RF inductor, ferrite core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 7,063 | ||
| 0805CS-180XGLC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant |
| 4,878 | ||
| 0805HS-180TJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 4,045 | ||
| 0805CS-180XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 3,603 | ||
| 0805CS-182XGEC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 2,864 | ||
| 1206CS-180XGLC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant |
| 2,385 | ||
| 1008PS-182KRC | Coilcraft Inc | Power inductor, shielded, 10% tol, SMT, RoHS RoHS : Compliant |
| 1,356 | ||
| 1206CS-180XGRC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, Halogen Free RoHS : Compliant |
| 330 | ||
| 1008CS-182XFEC | Coilcraft Inc | RF inductor, ceramic core, 1% tol, SMT, RoHS Halogen Free RoHS : Compliant | 0 | |||
| 0603LS-182XGEC | Coilcraft Inc | RF inductor, ferrite core, 2% tol, SMT, RoHS, Halogen Free RoHS : Compliant | 0 | |||
| 1008CS-182XGLC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
![]() TME | MPZ1005S181HT000 | TDK Corporation | Ferrite: bead; 180Ω; SMD; 1.6A; 0402; ±25%; 100MHz; -55÷125°C RoHS : Compliant |
| 18,453 | |
| CF1WS-180R | SR Components Inc | Resistor: carbon film; 180Ω; THT; 1W; ±5%; 500V; Ø0.6x26mm; Ø3.2x9mm |
| 4,700 | ||
| N0R17S18 | Brightek Optoelectronic Co Ltd | LED; red; SMD; 3200÷11200mcd; 1.7÷2.5VDC; 2.8x3.2x3.6mm; 30°; 20mA |
| 1,309 | ||
| PTS181216V050 | Eaton Bussmann | Fuse: PTC polymer; SMD; 500mA; Imax: 100A; PTS1812; 1812; reel,tape |
| 937 | ||
| 1SS184(TE85L,F) | Toshiba America Electronic Components | Diode: switching; SMD; 85V; 100mA; 4ns; SOT346; Ufmax: 1.2V; Ifsm: 2A RoHS : Compliant |
| 710 | ||
| S18B-CZHK-B-1(LF)(SN) | JST Manufacturing | Connector: wire-board; plug; data; PIN: 18; shrouded; 2A; angled RoHS : Compliant |
| 280 | ||
| CFM500S180C | Cincon Electronics Corporation | Power supply: switching; open; 500W; 80÷264VAC; OUT: 1; 18VDC; 93.5% RoHS : Compliant |
| 5 | ||
| MS18-1A | ETI Polam | Motor breaker; 0.18/0.25kW; 230÷690VAC; for DIN rail mounting |
| 2 | ||
| 5V STEP-UP/STEP-DOWN S18V20F5 | Pololu Corporation | Converter: step up / step down; Uout: 5V; Uin: 2.9÷32V; 2A; 80÷90% |
| 1 | ||
| 6V STEP-UP/STEP-DOWN S18V20F6 | Pololu Corporation | Converter: step up / step down; Uout: 6V; Uin: 2.9÷32V; 2A; 80÷90% |
| 1 | ||
| RTS18CCRY | Amphenol Corporation | Marker: connectors; eco|mate Aquarius; size 18; Marker: yellow RoHS : Compliant |
| 0 | ||
| S07G-GS18 | Vishay Intertechnologies | Diode: rectifying; SMD; 400V; 1.5A; DO219AB,SMF; Ufmax: 1.1V RoHS : Compliant |
| 0 | ||
| B32656S1824K577 | TDK Corporation | Capacitor: polypropylene; 820nF; 1.7kVDC; 750VAC; 43x48x33mm; THT RoHS : Compliant |
| 0 | ||
| BZT55B33-GS18 | Vishay Intertechnologies | Diode: Zener; 0.5W; 33V; SMD; SOD80; single diode RoHS : Compliant |
| 0 | ||
| BZT55C15-GS18 | Vishay Intertechnologies | Diode: Zener; 0.5W; 15V; SMD; SOD80; single diode RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | DS1818-10+ | Analog Devices Inc | 3.3V EconoReset with Pushbutton RoHS : Compliant | 91,709 | ||
| DS1813-15+ | Analog Devices Inc | 5V EconoReset with Pushbutton RoHS : Compliant | 51,033 | |||
| DS1813-10+ | Analog Devices Inc | IC: Supervisor Integrated Circuit; open drain; 1.2÷5.5VDC; TO92 RoHS : Compliant | 24,574 | |||
| DS1822+PAR | Analog Devices Inc | DS1822 Series Through Hole Digital Temperature Sensor - MICRO-8 RoHS : Compliant | 16,983 | |||
| DS1801E-014+ | Analog Devices Inc | Dual Audio Taper Potentiometer RoHS : Compliant | 9,658 | |||
TS1871ILT![]() | STMicroelectronics | TS187X Series 1.6 MHz 1.8 V In/Out Rail to Rail Operational Amplifier- SOT23-5 RoHS : Compliant | 6,000 | |||
| DS1832S+ | Analog Devices Inc | DS1832 Series 2.55 V/2.88 V 250 ms Push-Pull MicroMonitor Chip - SOIC-8 RoHS : Compliant | 5,121 | |||
| DS1813R-10+T&R | Analog Devices Inc | DS1813 Series 4.49 V 300 ms SMT Open Drain Simple Reset/Power On Reset - SOT-23 RoHS : Compliant | 2,999 | |||
| DS1832U+T&R | Analog Devices Inc | 3.3 Volt MicroMonitor Chip RoHS : Compliant | 2,999 | |||
| DS1804U-050+T&R | Analog Devices Inc | Nonvolatile Trimmer Potentiometer RoHS : Compliant | 2,230 | |||
| DS1812-10+T&R | Analog Devices Inc | 5V EconoReset with Active High Push-Pull Output RoHS : Compliant | 1,865 | |||
| DS1830AU+ | Analog Devices Inc | DS1830 Series 3.3 V Adjustable/Selectable Reset Sequence Pushbutton - uSOP-8 RoHS : Compliant | 1,737 | |||
| DS1859B-050+ | Analog Devices Inc | Dual, Temperature-Controlled Resistors with Internally Calibrated Monitors RoHS : Compliant | 992 | |||
| DS1803E-010+T&R | Analog Devices Inc | DS1803 Series 256 Step 10 kOhm Volatile Addressable Dual Digital Potentiometer RoHS : Compliant | 497 | |||
| VS18VUA1LBTBR1 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
![]() ComSIT USA | DS1818R20TR | Analog Devices Inc | AVAILABLE EU | 1,944 | ||
![]() ComSIT USA | BAV203GS18 | Vishay Intertechnologies | Small Signal Switching Diode, High Voltage Rectifier Diode, 1 Phase, 1 Element, 0.25A, 250V V(RRM), Silicon, DO-213AA RoHS : Not Compliant | 78,965 | ||
| MMSZ4684VGS18 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 3.3V V(Z), 5%, 0.5W, Silicon, Unidirectional RoHS : Compliant | 60,000 | |||
| ZMY15GS18 | Vishay Intertechnologies | ZENER DIODE Zener Diode, 15V V(Z), 6.76%, 1W, Silicon, Unidirectional, DO-213AB RoHS : Compliant | 45,000 | |||
| LL101AGS18 | Vishay Intertechnologies | Rectifier Diode, Schottky, 1 Phase, 1 Element, 0.03A, 60V V(RRM), Silicon, DO-213AA RoHS : Compliant | 20,000 | |||
| US1881LSEAAA000RE | Melexis Microelectronic Integrated Systems | HALL LATCH HIGH SENSITIVITY Hall Effect Sensor, -9.5mT Min, 9.5mT Max, CMOS, Plastic/epoxy, Rectangular, 3 Pin, Surface Mount RoHS : Not Compliant | 12,000 | |||
| MKS185460404PCV0B147S38 | Stocko Contact GmbH & Co Kg | Conn Shrouded Header HDR 4 POS 2.5mm Solder ST Thru-Hole RoHS : Compliant | 3,000 | |||
| TS1872ID | SGS Semiconductor Ltd | 1.8V INPUT/OUTPUT RAIL-TO-RAIL LOW POWER OPERATIONAL AMPLIFIER Operational Amplifier, 2 Func, 6000uV Offset-Max, BICMOS, PDSO8 RoHS : Not Compliant | 1,500 | |||
| LS1812N222K302NXTM | Novacap | CERAMIC CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 3000V, 10% +Tol, 10% -Tol, C0G, 30ppm/Cel TC, 0.0022uF, Surface Mount, 1812 RoHS : Compliant | 1,000 | |||
| DS1815R10+ | Maxim Integrated Products | Supervisory Circuit 2.88V SOT-23-3 T/R RoHS : Compliant | 960 | |||
| FK20S1802V | fct | MACHINED CONTACT FOR CRIMP CONNECTOR Connector Accessory, Contact, Copper Alloy RoHS : Compliant | 300 | |||
| DS1868050 | Vishay Dale | DUAL DIGITAL POTENTIOMETER CHIP Digital Potentiometer, 1 Func, 50000ohm, 3-wire Serial Control Interface, 256 Positions, CMOS, PDIP14 RoHS : Not Compliant | 35 | |||
| RCEC400GS1802JB | Vishay Intertechnologies | POWER RESISTOR Fixed Resistor, Metal Glaze/thick Film, 400W, 18000ohm, 4000V, 5% +/-Tol, 150ppm/Cel, Chassis Mount RoHS : Not Compliant | 20 | |||
AM27S185DC![]() | AMD | 2K X 4 OTPROM OTP ROM, 2KX4, 50ns, Bipolar, CDIP18 RoHS : Not Compliant | 10 | |||
| EP2S180F1020C4 | al | STRATIX II FPGA Field Programmable Gate Array, 71760 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1020 RoHS : Not Compliant | 1 | |||
| EP2S180F1020I4 | Altera Corporation | STRATIX II FPGA Field Programmable Gate Array, 71760 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1020 RoHS : Not Compliant | 1 | |||
![]() Interstate Connecting Components | 202K132-25-01-CS-1821- | TE Connectivity | 202K132-25-01-CS-1821-0 | 0 | ||
| 202K132-25-01-CS-1858- | TE Connectivity | 202K132-25-01-CS-1858-0 | 0 | |||
| 202K174-25/225-CS-1858-0 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 797-462S180P8MS-489 | Glenair Inc | 0 | ||||
| A85049111S18TX066D | Amphenol PCD | M85049111S18TX06-6D | 0 | |||
| A85049111S18TX086 | Amphenol PCD | M85049111S18TX08-6 | 0 | |||
| A85049144S18X044 | Amphenol PCD | M85049144S18X04-4 | 0 | |||
| A85049144S18X125 | Amphenol PCD | M85049144S18X12-5 | 0 | |||
| 85333ES1802SNG126 | SOURIAU-SUNBANK | J6270 | 0 | |||
| 983-6S 18-31 S7 | TE Connectivity | 983-6S 18-31 S7 | 0 | |||
| 687NS183B1004 | Glenair Inc | MICRO-D HARDWARE | 0 | |||
| AE775S18-8S | Conesys | 0 | ||||
| CIR02RFS1819PF80T12 | ITT Interconnect Solutions | CIR02RFS-18-19P-F80-T12 | 0 | |||
| FRCIR02RFS183PF80T12 | ITT Interconnect Solutions | FRCIR02RFS-18-3P-F80-T12 | 0 | |||
| FRITS4102RFS18-1PB1F6 | Glenair Inc | 0 | ||||
![]() NexGen Digital | RMC16S-181JTH50K | Kamaya Inc | 18,000 | |||
| 1008CS-180KXBC | Coilcraft Inc | 1,991 | ||||
| 0805CS180XJBC | Coilcraft Inc | 933 | ||||
| 1008HS-181TJBC | Coilcraft Inc | RoHS : Not Compliant | 875 | |||
| 1008CS-182XJBC | Coilcraft Inc | RoHS : Not Compliant | 814 | |||
| ECS-184-S-20A-TR | ECS International Inc | RoHS : Compliant | 524 | |||
| 1812LS-183XJBC | Coilcraft Inc | RoHS : Not Compliant | 500 | |||
DS1834AU+![]() | Maxim Integrated Products | RoHS : Compliant | 152 | |||
| DS1818R-5+ | Maxim Integrated Products | 143 | ||||
| ATC600S180GT250 | American Technical Ceramics Corp | 82 | ||||
| 0603LS-181XJLC | Coilcraft Inc | RoHS : Compliant | 60 | |||
| LP3873ES-1.8/NOPB | National Semiconductor Corporation | RoHS : Compliant | 49 | |||
| NAS186DD3C6.B | 40 | |||||
DS1818R-5-U+![]() | Maxim Integrated Products | RoHS : Compliant | 13 | |||
| DS18S20Z | Dallas Semiconductor | RoHS : Not Compliant | 8 | |||
![]() PEI Genesis | 85333RS1814SNL | SOURIAU-SUNBANK |
| 19 | ||
| 85333RS1808PN | SOURIAU-SUNBANK |
| 0 | |||
| 85334ES1814SN | SOURIAU-SUNBANK |
| 0 | |||
| 85337KS1831SNL | SOURIAU-SUNBANK |
| 0 | |||
| 8D015S18PB | SOURIAU-SUNBANK | RoHS : Unknown |
| 0 | ||
| 8D019S18SE | SOURIAU-SUNBANK | RoHS : Unknown |
| 0 | ||
| 8D519S18PC251 | SOURIAU-SUNBANK |
| 0 | |||
| 8D715S18SB | SOURIAU-SUNBANK | RoHS : Unknown |
| 0 | ||
| AE83383S1814Y | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| S1802-07-1.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| S1802-10-2.0-34-059 | SOURIAU-SUNBANK |
| 0 | |||
| S1802-16-3.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| S1807-37 | SOURIAU-SUNBANK |
| 0 | |||
| S1816A3204-8 | SOURIAU-SUNBANK |
| 0 | |||
| S1816C3903-8 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | MTMM-102-04-T-S-185 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 1,419 | |
| MTLW-104-05-T-S-185 | Samtec Inc | .100 Low Prof Variable Post Height Termi RoHS : Compliant |
| 887 | ||
| MTLW-103-05-S-S-185 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 832 | ||
| MTLW-114-07-G-S-185 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 290 | ||
| MTLW-117-05-T-S-185 | Samtec Inc | .100 Mini Mate Universal Single Row Disc RoHS : Compliant |
| 201 | ||
| MS3450LS18-4S | Conesys | Wall Mount Receptacle |
| 155 | ||
| 202K174-25/225-CS-1858-0 | TE Connectivity | Connectors RoHS : Compliant |
| 84 | ||
| MTLW-122-22-S-S-185 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 75 | ||
| MS3456LS18-11S | Conesys | Straight Plug |
| 71 | ||
| AIS18N08AN024-2M | Altech Corporation | SENSOR-M18-S8.0-NF-1030VDC |
| 38 | ||
| MS3456LS18-4PY | Conesys | Straight Plug |
| 16 | ||
| 85333RS1814SNL | SOURIAU-SUNBANK | 853 14C 14#16 SKT PLUG |
| 13 | ||
| MS3459KS18-9P | Conesys | Self Locking Plug |
| 6 | ||
| MS3454LS18-1P | Conesys | Jam Nut Receptacle |
| 4 | ||
| MS3454LS18-6PY | Conesys | JAM NUT REC. |
| 4 | ||
![]() PUI | CBW57-HS-18A | 122 | ||||
| 0103-1P07S18TSAA01 | 5 | |||||
![]() Richardson RFPD | CCS-18S18O-T | Teledyne Relays | RF Switch SP8T 0MHz to 8GHz 60dB RoHS : Not Compliant | 0 | ||
| CCS-18S18C-T | Teledyne Relays | RF Coaxial Switch RoHS : Not Compliant | 0 | |||
| CS-18S18C-T | Teledyne Relays | RF Switch SP8T 0MHz to 8GHz 60dB RoHS : Compliant | 0 | |||
| ATS-HP-F8L350S18W-423 | Advanced Thermal Solutions Inc | Thrml Mgmt Access Flat Heat Pipe Copper Alloy RoHS : Compliant |
| 0 | ||
| EKMS181VSN122MQ45S | United Chemi-Con Inc | Cap Aluminum Lytic 1200uF 180V 20% (25.4 X 45mm) S RoHS : Compliant | 0 | |||
| LTC2326CMS-18#PBF | Analog Devices Inc | 1-Channel Single ADC SAR 250ksps 18-bit Serial 16- RoHS : Compliant |
| 0 | ||
| CS-18N440 | Teledyne Relays | RF COAXIAL SWITCH RoHS : Compliant | 0 | |||
| AS-18.432-20-3030-TR | Raltron Electronics Corporation | CRYSTAL RESONATOR RoHS : Compliant | 0 | |||
| MD48S1.8-6000 | Wall Industries Inc | Up to 20 Watts DC/DC Power Converters Single and D RoHS : Compliant | 0 | |||
| CAH5S18-25 | Wall Industries Inc | Module DC-DC 5VIN 1-OUT 18V 1.38A 25W 9-Pin | 0 | |||
| EKMS181VSN222MR50S | United Chemi-Con Inc | Cap Aluminum Lytic 2200uF 180V 20% (30 X 50mm) Sna RoHS : Compliant | 0 | |||
| ABLS-18.432MHZ-D4Y-T | Abracon Corporation | Crystal 18.432MHz ±30ppm (Tol) ±30ppm (Stability) RoHS : Compliant |
| 0 | ||
| THAS183M010AD1C | Knowles CDE | Aluminum Electrolytic Capacitor RoHS : Compliant |
| 0 | ||
| CCR-38S18C | Teledyne Relays | RF COAXIAL SWITCH RoHS : Compliant |
| 0 | ||
| CMZF48S1.8-6000 | Wall Industries Inc | DCTODC CONVERTR MOD | 0 | |||
![]() Rutronik | TZMC12-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 12V 5% MINIMELF RoHS : Compliant |
| 200,000 | |
| LL4448-GS18 | Vishay Intertechnologies | SI-DIODE 0,150A 100V MINIMELF RoHS : Compliant |
| 100,000 | ||
| TZMB18-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 18V 2% MINIMELF RoHS : Compliant |
| 100,000 | ||
| TZMB15-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 15V 2% MINIMELF RoHS : Compliant |
| 80,000 | ||
| TZMC10-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 10V 5% MINIMELF RoHS : Compliant |
| 70,000 | ||
| TZMB8V2-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 8.2V 2% MINIMELF RoHS : Compliant |
| 50,000 | ||
| TZMC15-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 15V 5% MINIMELF RoHS : Compliant |
| 40,000 | ||
| TZMC3V9-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 3,9V 5% MINIMELF RoHS : Compliant |
| 30,000 | ||
| TZMC30-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 30V 5% MINIMELF RoHS : Compliant |
| 20,000 | ||
| TZMC36-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 36V 5% MINIMELF RoHS : Compliant |
| 20,000 | ||
| ZMY62-GS18 | Vishay Intertechnologies | Z-DIODE 1,0W 62V 5% MELF RoHS : Compliant |
| 10,000 | ||
| ZMY51-GS18 | Vishay Intertechnologies | Z-DIODE 1,0W 51V 5% MELF RoHS : Compliant |
| 10,000 | ||
| TZM5231B-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 5,1V 5% MINIMELF RoHS : Compliant |
| 10,000 | ||
| TZMC27-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 27V 5% MINIMELF RoHS : Compliant |
| 10,000 | ||
| TZMC39-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 39V 5% MINIMELF RoHS : Compliant |
| 10,000 | ||
![]() Chip 1 Exchange | LFTVS18-1F3![]() | STMicroelectronics | INSTOCK RoHS : Compliant | 10,000 | ||
| MF60SS-180F-A5 | ASJ Holdings Limited | INSTOCK | 10,000 | |||
| CIL10S180KN# | Samsung Electro-Mechanics | INSTOCK | 3,814 | |||
| LFTVS18-1F3 | INSTOCK | 2,040 | ||||
| DS1811R-15 | DS | INSTOCK | 1,984 | |||
| 1008HS-18IT JBC | INSTOCK | 1,600 | ||||
| BZT52B8V2-V-GS18 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 1,438 | |||
| BZT52B8V2-V-GS18 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 1,438 | |||
| BAT54C-GS18 | INSTOCK | 900 | ||||
PKMCS1818E20A0-R1![]() | Murata Manufacturing Co Ltd | INSTOCK RoHS : Compliant | 250 | |||
| AT93C66A-10US-1.8 | INSTOCK | 98 | ||||
| DS1804Z-100 | Maxim Integrated Products | INSTOCK RoHS : Not Compliant | 49 | |||
| DS1834 | INSTOCK | 32 | ||||
| LP3962ES1.8 | INSTOCK | 27 | ||||
| RZAKS185 | INSTOCK | 14 | ||||
![]() Avnet Abacus | LQG15HS18NJ02D | Murata Manufacturing Co Ltd | Multilayer Inductor 18 nH 036 ohm 22 GHz 300 mA 0402 1005 Metric LQG15HS02 Series (Alt: LQG15HS18NJ02D) RoHS : Compliant | 40,000 | ||
| MMZ1005S182ET000 | TDK Corporation | Ferrite Bead 0402 1005 Metric 18 kohm 200 mA MMZE Series 15 ohm 25 (Alt: MMZ1005S182ET000) RoHS : Compliant | 40,000 | |||
| MMZ1005S182ETD25 | TDK Corporation | MMZ1005S182ETD25 (Alt: MMZ1005S182ETD25) RoHS : Compliant | 10,000 | |||
| PTS181230V020 | Eaton Corporation | Resettable Fuse PPTC 1812 4532 Metric PolyTron PTS1812 30 VDC 200 mA 400 mA 002 s - Tape and Reel (Alt: PTS181230V020) RoHS : Compliant | 8,000 | |||
| PTS181216V110 | Eaton Corporation | Resettable Fuse PPTC 1812 4532 Metric PolyTron PTS1812 16 VDC 11 A 22 A 05 s - Tape and Reel (Alt: PTS181216V110) RoHS : Compliant | 2,000 | |||
| ATBS-PS-1805 | Amphenol Corporation | Backshell for T1618PSX and AT1615PSX Series 1518 Position HeavyDuty Connectors 18 Shell Size ST Thermoplastic (Alt: ATBS-PS-1805) RoHS : Compliant | 1,050 | |||
ECM140US18![]() | XP Power | POWER SUPPLY 140WATT OPEN FRAME (Alt: ECM140US18) RoHS : Compliant | 10 | |||
| ATS184-E | CTS Corporation | (Alt: ATS184-E) RoHS : Compliant | 0 | |||
| RCEC400GS1802JB | Vishay Intertechnologies | (Alt: RCEC400GS1802JB) RoHS : Compliant | 0 | |||
PKMCS1818E20A0-R1![]() | Murata Manufacturing Co Ltd | Buzzer Piezo 18V Solder Pad 2kHz Surface Mount Emboss TR (Alt: PKMCS1818E20A0-R1) RoHS : Compliant | 0 | |||
| A785KS187M1VLAS032 | KEMET Corporation | Hybrid Aluminium Electrolytic Capacitor 180 F 20 35 V Radial Can SMD 0032 ohm (Alt: A785KS187M1VLAS032) RoHS : Compliant | 0 | |||
| MTLW-103-05-S-S-185 | Samtec Inc | Pin Header BoardtoBoard 254 mm 1 Rows 3 Contacts Through Hole MTLW Series (Alt: MTLW-103-05-S-S-185) RoHS : Compliant | 0 | |||
| MTLW-104-05-T-S-185 | Samtec Inc | Pin Header BoardtoBoard 254 mm 1 Rows 4 Contacts Through Hole MTLW Series (Alt: MTLW-104-05-T-S-185) RoHS : Compliant | 0 | |||
| MS180LH3-HRMJ-040V100 | Hirose Electric Co Ltd | (Alt: CL0362-0224-9-01) RoHS : Compliant | 0 | |||
ABLS-18.432MHZ-20-B-3-H-T![]() | Abracon Corporation | Crystal Standard 18432 MHz SMD 115mm x 47mm x 42mm 35 ppm 20 pF 25 ppm ABLS - Tape and Reel (Alt: ABLS-18.432MHZ-20-B-3-H-T) RoHS : Compliant | 0 | |||
![]() Avnet Asia | EYGS182307 | Panasonic Electronic Components | (Alt: EYGS182307) RoHS : Compliant | 50 | ||
| 1SS187(TE85L,F) | Toshiba America Electronic Components | (Alt: 1SS187(TE85L,F)) RoHS : Compliant | 0 | |||
| PTS18126V260 | Eaton Corporation | (Alt: PTS18126V260) RoHS : Compliant | 0 | |||
| PTS18128V150 | Eaton Corporation | (Alt: PTS18128V150) RoHS : Compliant | 0 | |||
ECS-2520S18-250-FN-TR![]() | ECS International Inc | (Alt: ECS-2520S18-250-FN-TR) RoHS : Compliant | 0 | |||
| NCP163AFCS180T2G | onsemi | LDO Regulator, 250 mA, Ultra-High PSRR, Ultra-Low Noise 1.8 V, Active Discharge. (Alt: NCP163AFCS180T2G) RoHS : Compliant | 0 | |||
| PTVS18VP1UTP-QX | Nexperia | (Alt: PTVS18VP1UTP-QX) RoHS : Compliant | 0 | |||
| LL46-GS18 | Vishay Intertechnologies | SCHOTTKY DIODE SOD80 MINIMELF (Alt: LL46-GS18) RoHS : Compliant | 0 | |||
| TZM5232B-GS18 | Vishay Intertechnologies | (Alt: TZM5232B-GS18) RoHS : Compliant | 0 | |||
| TZMC2V7-GS18 | Vishay Intertechnologies | ZENER DIODE SOD80 MINIMELF (Alt: TZMC2V7-GS18) RoHS : Compliant |
| 0 | ||
| BE70C-S-18SP-2-02-0305 | Samtec Inc | SATBE70C-S-18SP-2-02-0305 70 GHZ, BULLS (Alt: BE70C-S-18SP-2-02-0305) RoHS : Compliant | 0 | |||
| LL4148-GS18 | Vishay Intertechnologies | (Alt: LL4148-GS18) RoHS : Compliant | 0 | |||
| 1SS184,LF(B | Toshiba America Electronic Components | (Alt: 1SS184,LF(B) RoHS : Compliant |
| 0 | ||
| TZMB20-GS18 | Vishay Intertechnologies | (Alt: TZMB20-GS18) RoHS : Compliant | 0 | |||
| TZMB15-GS18 | Vishay Intertechnologies | ZENER DIODE SOD80 MINIMELF (Alt: TZMB15-GS18) RoHS : Compliant | 0 | |||
![]() Avnet Silica | PTVS18VP1UP,115![]() | Nexperia | TVS Diode PTVS Unidirectional 18 V 292 V SOD128 2 Pins (Alt: PTVS18VP1UP,115) RoHS : Compliant | 141,000 | ||
LD1117S18CTR![]() | STMicroelectronics | LDO Regulator Pos 18V 13A 4Pin3Tab SOT223 TR (Alt: LD1117S18CTR) RoHS : Compliant | 117,500 | |||
TS1871AIYLT![]() | STMicroelectronics | OP Amp Single GP RR IO 6V 5Pin SOT23 TR (Alt: TS1871AIYLT) RoHS : Compliant | 111,000 | |||
TS1874IPT![]() | STMicroelectronics | OP Amp Quad GP RR IO 6V 14Pin TSSOP TR (Alt: TS1874IPT) RoHS : Compliant | 42,500 | |||
LD1117S18TR![]() | STMicroelectronics | Fixed LDO Voltage Regulator 15V in 11V Dropout 18V950mA out SOT2233 (Alt: LD1117S18TR) RoHS : Compliant | 42,500 | |||
LD1117AS18TR![]() | STMicroelectronics | LDO Regulator Pos 18V 1A 4Pin3Tab SOT223 TR (Alt: LD1117AS18TR) RoHS : Compliant | 30,000 | |||
TS1874AIYPT![]() | STMicroelectronics | Operational Amplifier RRIO 4 Channels 18 MHz 06 Vs 18V to 6V TSSOP 14 Pins (Alt: TS1874AIYPT) RoHS : Compliant | 12,500 | |||
| LDL1117S18R | STMicroelectronics | Fixed LDO Voltage Regulator 26 V to 18 V input 40 mV Dropout 18 V 12 A out SOT2234 (Alt: LDL1117S18R) RoHS : Compliant | 12,500 | |||
TS1871AILT![]() | STMicroelectronics | OP Amp Single GP RR IO 6V 5Pin SOT23 TR (Alt: TS1871AILT) RoHS : Compliant | 9,000 | |||
TS1872IDT![]() | STMicroelectronics | OP Amp Dual GP RR IO 6V 8Pin SO N TR (Alt: TS1872IDT) RoHS : Compliant | 7,500 | |||
TS1871ILT![]() | STMicroelectronics | OP Amp Single GP RR IO 6V 5Pin SOT23 TR (Alt: TS1871ILT) RoHS : Compliant | 6,000 | |||
TS1874IYPT![]() | STMicroelectronics | OP Amp Quad GP RR IO 6V 14Pin TSSOP TR (Alt: TS1874IYPT) RoHS : Compliant | 2,500 | |||
TS1874AIYDT![]() | STMicroelectronics | OP Amp Quad GP RR IO 6V 14Pin SOIC TR (Alt: TS1874AIYDT) RoHS : Compliant | 2,500 | |||
MCP23S18-E/MJ![]() | Microchip Technology Inc | IO Expander 16 bit I2C Serial SPI 18 V 55 V QFN 24 Pins (Alt: MCP23S18-E/MJ) RoHS : Compliant | 91 | |||
| 71V25761S183PFGI | Renesas Electronics Corporation | (Alt: 71V25761S183PFGI) RoHS : Compliant | 72 | |||
![]() Braemac Americas-Symmetry | ABLS-18.432MHZ-20-B-3-H-T![]() | Abracon Corporation | CRYSTAL 18.4320MHZ 20PF SMD RoHS : Compliant |
| 0 | |
| CFM600S180-R | Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply |
| 0 | ||
| ABLS-18.000MHZ-B4-T | Abracon Corporation | CRYSTAL 18.0000MHZ 18PF SMD |
| 0 | ||
ABLS-18.432MHZ-20-D-4-H-T![]() | Abracon Corporation | CRYSTAL 18.4320MHZ 20PF SMD RoHS : Compliant |
| 0 | ||
ABLS-18.432MHZ-B-4-Y-T![]() | Abracon Corporation | CRYSTAL 18.4320MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| AFS1842.5S4 | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMMLPAAXJS-18.4320T | Abracon Corporation |
| 0 | |||
| ABLS-18.432MHZ-D4Y-T | Abracon Corporation | CRYSTAL 18.432MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| AMMLPDBLRS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPVAVCS-18.4320T | Abracon Corporation |
| 0 | |||
ASPI-0428S-180M-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AECS1806C03ZS-3000S | Abracon Corporation | 3IN1 LTE/GNSS/WIFI EXT SHARKFIN RoHS : Compliant |
| 0 | ||
| CFM600S180F-R | Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply |
| 0 | ||
| AMMLPFLBVJS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPVAXCS-18.4320T | Abracon Corporation |
| 0 | |||
![]() Chip-Germany GmbH | ABLS-18.432MHZ-B2-T | Abracon Corporation | 49 | |||
| WS18-3D460 | SICK AG | 1 | ||||
![]() Component Electronics, Inc | RMCF1/16S-18.2K-1% | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 10,000 | |
| ECS-180-20-5P-TR | ECS International Inc | IN STOCK SHIP TODAY |
| 5,000 | ||
| NAS1834C4-630 | MS INSERTS | IN STOCK SHIP TODAY | 500 | |||
AM27S185DC![]() | AMD | IN STOCK SHIP TODAY RoHS : Not Compliant | 167 | |||
| DS1848E-050 | Maxim Integrated Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 141 | ||
| E2034S.18.10 | Carol Cable | IN STOCK SHIP TODAY |
| 110 | ||
| SCS18B48-10.000MHZ | Suntsu Electronics Inc | IN STOCK SHIP TODAY |
| 100 | ||
| GPEG20DS-TIS185 | Mueller Electric Company | IN STOCK SHIP TODAY |
| 83 | ||
| LS1808N102K302NX | Novacap | IN STOCK SHIP TODAY |
| 33 | ||
| MKDS1/8-3.81 | Phoenix Contact | IN STOCK SHIP TODAY |
| 26 | ||
| MS18235-1BT | Dialight | IN STOCK SHIP TODAY |
| 20 | ||
| PPS181-1A1505-L | TE Connectivity | IN STOCK SHIP TODAY | 10 | |||
| ECS-18-13-1 | ECS International Inc | IN STOCK SHIP TODAY |
| 10 | ||
| ICS1886M | ICS | IN STOCK SHIP TODAY | 2 | |||
| EET-HC2S181JA | Panasonic Electronic Components | IN STOCK SHIP TODAY |
| 2 | ||
![]() DB Roberts | NAS1801-3-10 | Military Specifications |
| 272 | ||
| NAS1802-08-10.D | Military Specifications | SCREW DFARS COMPLIANT REQUIRED |
| 52 | ||
| NAS1801-06-15 | Military Specifications |
| 10 | |||
| RS-1809-0937 | Heyco | RS 0187 OD X091 ID X937 LG NAT | 0 | |||
| D4-A35T12DSS18PSNA | Southco | D4-A35T12DSS18PSNA | 0 | |||
| CHC-S18DB | Sugatsune Kogyo Co Ltd | SPLIT CABLE GROMMET | 0 | |||
| D4-A35T15DSS18PSNA | Southco | D4-A35T15DSS18PSNA | 0 | |||
| D4-A5T23DSS18PSNA | Southco | D4-A5T23DSS18PSNA | 0 | |||
| RS-1809-0750 | Heyco | RS 0187 OD X091 ID X750 LG NAT | 0 | |||
| DMS1875-1A | Essentra Components | 1.875IN ID 1.00IN LENGTHSOFT R | 0 | |||
| NAS1831C6E64 | RAF Electronic Hardware | 0 | ||||
| CHC-S18BL | Sugatsune Kogyo Co Ltd | SPLIT CABLE GROMMET | 0 | |||
| NAS1829C3C03 | RAF Electronic Hardware | DWG ID # R0039 | 0 | |||
| NAS1831AC4B12 | RAF Electronic Hardware | RAF Aluminum Standoffs | 0 | |||
| D4-AW5T20DSS18PSNA | Southco | D4-AW5T20DSS18PSNA | 0 | |||
![]() EBV Elektronik | LL4148-GS18 | Vishay Intertechnologies | (Alt: LL4148-GS18) RoHS : Compliant | 1,940,000 | ||
| S07M-GS18 | Vishay Intertechnologies | (Alt: S07M-GS18) RoHS : Compliant | 560,000 | |||
| TZMC5V1-GS18 | Vishay Intertechnologies | (Alt: TZMC5V1-GS18) RoHS : Compliant | 80,000 | |||
| BZT55B9V1-GS18 | Vishay Intertechnologies | ZENER DIODE SOD80 QUADROMELF (Alt: BZT55B9V1-GS18) RoHS : Compliant | 80,000 | |||
| ZMY12-GS18 | Vishay Intertechnologies | (Alt: ZMY12-GS18) RoHS : Compliant | 60,000 | |||
| BAS81-GS18 | Vishay Intertechnologies | (Alt: BAS81-GS18) RoHS : Compliant | 40,000 | |||
RS07K-GS18![]() | Vishay Intertechnologies | (Alt: RS07K-GS18) RoHS : Compliant | 20,000 | |||
| TZMC3V3-GS18 | Vishay Intertechnologies | (Alt: TZMC3V3-GS18) RoHS : Compliant | 20,000 | |||
| ZMY47-GS18 | Vishay Intertechnologies | (Alt: ZMY47-GS18) RoHS : Compliant | 15,000 | |||
| TZMC3V9-GS18 | Vishay Intertechnologies | (Alt: TZMC3V9-GS18) RoHS : Compliant | 10,000 | |||
TS1852IST![]() | STMicroelectronics | OP Amp Dual GP RR IO 6V 8Pin MSOP TR (Alt: TS1852IST) RoHS : Compliant | 8,000 | |||
| VS-18TQ045STRL-M3 | Vishay Intertechnologies | Schottky D2PAKe3 (Alt: VS-18TQ045STRL-M3) RoHS : Compliant | 5,600 | |||
| ZMY24-GS18 | Vishay Intertechnologies | (Alt: ZMY24-GS18) RoHS : Compliant | 5,000 | |||
| ZMY4V7-GS18 | Vishay Intertechnologies | (Alt: ZMY4V7-GS18) RoHS : Compliant | 5,000 | |||
| 1SS184(TE85L,F) | Toshiba America Electronic Components | Diode Switching 85V 03A 3Pin SMini TR (Alt: 1SS184(TE85L,F)) RoHS : Compliant | 3,000 | |||
![]() FDH Electronics | MS3402DS18-11PX-LC | Corsair Electrical Connectors Inc | Connector |
| 35 | |
| MS3452LS18-1P-LC | Corsair Electrical Connectors Inc | Connector 5015 |
| 31 | ||
| MS3451LS18-5A | Corsair Electrical Connectors Inc | Connector |
| 19 | ||
| MS3402DS18-8B | Corsair Electrical Connectors Inc | Connector |
| 13 | ||
| MS18029-5S-2 | Marco | Connector Acc | 11 | |||
| S1816A3204-8 | SOURIAU-SUNBANK | Backshells & Ac | 7 | |||
| MS18029-2S11 | Arvan Inc | Backshells & Ac | 6 | |||
| MS18029-1S7 | Arvan Inc | Backshells & Ac | 4 | |||
| MS3402DS18-4EY | Corsair Electrical Connectors Inc | Connector |
| 3 | ||
| MS3450KS18-1S-LC | Corsair Electrical Connectors Inc | Connector 5015 |
| 3 | ||
| MS18029-1S18 | R&B Electronics | Wire and Cable | 2 | |||
| MS3450LS18-20A | Corsair Electrical Connectors Inc | Connector |
| 2 | ||
| MS3450LS18-20AX | Corsair Electrical Connectors Inc | Connector |
| 2 | ||
| MS3450LS18-6S-LC | Corsair Electrical Connectors Inc | Connector 5015 |
| 2 | ||
| MS18029-1S-18 | R&B Electronics | Wire and Cable |
| 0 | ||
![]() Flip Electronics | NCP161AFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant | 200,000 | ||
| NCP160BFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 160,000 | ||
| Z8S18020VSG1960 | Littelfuse Inc | Stock, Ship Today | 25,586 | |||
| Z8S18020VEG00TR | Littelfuse Inc | Stock, Ship Today | 4,550 | |||
| NCV59151DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,976 | ||
NCP5663DS18R4G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,400 | ||
| Z8S18010FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 2,126 | |||
| Z8S18010VSG | Littelfuse Inc | Stock, Ship Today | 1,675 | |||
| NCP59301DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 700 | ||
| Z8S18010FEG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 305 | |||
NCP5663DS18G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 297 | ||
| Z8S18033FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 161 | |||
| EP2S180F1020C3 | Altera Corporation | Stock RoHS : Not Compliant | 10 | |||
| 80HCPS1848CHMI | Integrated Device Technology Inc | Stock, Ship Today RoHS : Not Compliant |
| 4 | ||
| ICS80HCPS1848CHMI | Integrated Device Technology Inc | Stock | 4 | |||
![]() Maritex | SIL RNL A TYPE, 9PINS 1/8W 5%, 8X 100E | Royal Electronic Factory (Thailand) Co Ltd | Chip array SMD; RA8x100R; 1/8W; 5% |
| 6,517 | |
| SIL RNL A TYPE, 9PINS 1/8W 5%, 8X 330K | Royal Electronic Factory (Thailand) Co Ltd | Resistor network; RA8x330K; 1/8W; 5% |
| 4,010 | ||
| ADBMS1818ASWZ-RL | Analog Devices Inc | Battery Management ICs; ADBMS1818ASWZ-RL; ANALOG DEVICES; 64 RoHS : Compliant |
| 3,627 | ||
| SIL RNL A TYPE, 9PINS 1/8W 5%, 8X 470K | Royal Electronic Factory (Thailand) Co Ltd | Resistor network; RA8x470K; 1/8W; 5% |
| 3,090 | ||
| FPV201209S180PKT | Fenghua (HK) Electronics Ltd | Varistor SMD; 0805; 18VDC; 45pF RoHS : Compliant |
| 3,000 | ||
| SIL RNL A TYPE, 9PINS 1/8W 5%, 8X 22E | Royal Electronic Factory (Thailand) Co Ltd | Resistor network; RA8x470K; 1/8W; 5% |
| 2,389 | ||
| DCPS1831C | CONNTHERM | DC plug; female; inner diameter 3.1mm; outer diameter 6.5mm |
| 1,435 | ||
| SIL RNL A TYPE, 9PINS 1/8W 5%, 8X 220E | Royal Electronic Factory (Thailand) Co Ltd | Resistor network; RA8x220R; 1/8W; 5% |
| 1,267 | ||
| MPZ1608S181ATDH5 | TDK Corporation | Ferrite Beads; MPZ1608S181ATDH5; TDK; 600 �m; 0603; 180 ?; 50 m? RoHS : Compliant |
| 1,029 | ||
| PLS18S-CT | CONNTHERM | Pin Header; pitch 2.54mm, 1x18 pins, assembly: THT; male; straight; single row |
| 1,000 | ||
| SIL RNL A TYPE, 9PINS 1/8W 5%, 8X 220K | Royal Electronic Factory (Thailand) Co Ltd | Resistor network; RA8x220K; 1/8W; 5% |
| 663 | ||
| PBMS18S-CT | CONNTHERM | Pin Header; pitch 2.00mm; 1x18 pins; assembly: THT; female; straight; single row |
| 500 | ||
SN75ALS181NSR![]() | Texas Instruments | Other Interface ICs; SN75ALS181NSR; TEXAS INSTRUMENTS; 14; 5.25 V; 4.75 V; SOP RoHS : Compliant |
| 490 | ||
| QOS1.8432MHZ-TTL/CMOS-5V-30PPM-DIL8-ROHS | Fronter Electronics Co Ltd | Quartz oscillator; 1.8432 MHz; 30ppm |
| 414 | ||
| SIL RNL A TYPE, 9PINS 1/8W 5%, 8X 330E | Royal Electronic Factory (Thailand) Co Ltd | Resistor network; RA8x330R; 1/8W; 5% |
| 46 | ||
![]() Neutron USA | QS186LEQ8 | Banner Engineering Corp | Through Beam Sensor, Emitter, 15m Range, 30VDC, M18 Threaded, QS18 Series |
| 50 | |
| QS18VN6RQ8 | Banner Engineering Corp | Photoelectric Sensor, Receiver, WORLD-BEAM, 10-30Vdc, NPN L/D, R: 20m, QDM12, 66449 |
| 35 | ||
| QS186LEQ5 | Banner Engineering Corp | Sensor Laser Class 1 Emitter 6 InchEuro Pigtail Cable, QS18 Series |
| 21 | ||
| S18RW3R | Banner Engineering Corp | Sensor, Opposed Sensing Mode, DO, 20 m, Infrared LED, 950 nm, 20 mA (Avg.) |
| 17 | ||
| QS18VN6LLP | Banner Engineering Corp | Photoelectric Sensor, Laser Polarized Retro, Rectang M18Mt, R: 10m, 10-30VDC, L/D NPN, 2m Cable, 73235 |
| 10 | ||
| QS18VN6LVQ8 | Banner Engineering Corp | QS18 Photoelectric Sensor 6.5 Meter Range 10-30 VDC Input, QS18 Series |
| 9 | ||
| QS186LEQ | Banner Engineering Corp | PE Sensor, Laser Emitter; R: 30 m, In: 10-30Vdc, 0.15m M8 Pigtail QD, 77328 |
| 8 | ||
| QS18VN6LAF250Q5 | Banner Engineering Corp | QS18 PE Sensor, Laser Class 2, Adj Field, R: 250 mm, 10-30Vdc, L/D NPN, 6" Pigtail QDM12, 75737 |
| 7 | ||
| QS186EQ | Banner Engineering Corp | Qs18 World-Beam, Emitter, R: 20 M, 10-30Vdc, 6" QDM8, 61619 |
| 5 | ||
| QS186EVQ5 | Banner Engineering Corp | Photoelectric Sensors WORLD-BEAM QS18 Series: Visible Red Emitter; Range: 20 m; Input: 10-30 V dc; Output: Not Applicable; 150 mm (6 in) M12 Pigtail QD |
| 4 | ||
| DS18VP6LPW, 76563 | Banner Engineering Corp | Banner Engineering DS18VP6LPW Photoelectric, Polarized Retro, 3m, 10-30VDC, PNP output, 2m cable, DS18 Series |
| 1 | ||
| QS186LE10 | Banner Engineering Corp | Photoelectric Sensor, Emitter, Laser Class 1, Opposed, Rectang M18Mt, R: 15m, 10-30VDC, 2m Cable, 70254 |
| 1 | ||
| QS18VP6W | Banner Engineering Corp | QS18 Photoelectric Sensor; Divergent; Diffuse; INFRARED; Range 100 mm; Potentiometer |
| 0 | ||
| QS18EP6LPQ | Banner Engineering Corp | Photoelectric Sensor, Polarized Retro, 3.5m, 10-30VDC, PNP, QD, QS18 |
| 0 | ||
| QS18VP6LLPQ7 | Banner Engineering Corp | QS18 WORLD-BEAM; Laser Polarized Retroreflective; Range 0.1 to 1; 73245 |
| 0 | ||
![]() Pasternack Enterprises US | PE3W16309/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Female Bulkhead to SMA Male Cable 18 Inch Length Using PE-SR405AL Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMA male cable 18 inch length using PE-SR405AL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to SMA male cable 18 inch length using PE-SR405AL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA bulkhead cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W16309/HS-18 can also be known as a SMA jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. The semi-rigid RF cable has an in-series connection. Our bulkhead SMA female to SMA male cable has a maximum VSWR of 1.4:1. SMA jack to SMA plug cable assembly PE3W16309/HS-18 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16309/HS-18 can also be used in the other direction and will be a SMA male to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 285 | |
| PE3C0062/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0062/HS-180 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C0062/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink. |
| 162 | ||
| PE3W20796/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. TNC Male to SMA Male Cable 18 Inch Length Using TCOM-400 Coax with HeatShrink., Pasternack’s PE3W20796/HS-18 TNC male to SMA male RF cable assembly using TCOM-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and an SMA cable connection on the other. Our TNC to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W20796/HS-18 can also be known as a TNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.705-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W20796/HS-18 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Our TNC male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W20796/HS-18 TNC plug to SMA plug cable assembly is built with TCOM-400, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3W20796/HS-18 can also be used in the other direction and will be an SMA plug to TNC plug cable assembly if the opposite connectivity is required. This TNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA RF cable assembly as per your requirements. |
| 158 | ||
| PE3W08827/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male Right Angle to SMA Male Cable 18 Inch Length Using PE-SR402FLJ Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMA cable connection on one end and a SMA cable connection on the other. Our right angle SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W08827/HS-18 can also be known as a right angle SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W08827/HS-18 RF cable has a FEP jacket of 0.161-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. Our right angle SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W08827/HS-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance. One connector features the solder/solder attachment method and a stainless steel body with gold plating, while the other has the solder (without contact) attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W08827/HS-18 can also be used in the other direction and will be a SMA male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 126 | ||
| PE3W08827LF/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Right Angle Cable 18 Inch Length Using PE-SR402FLJ Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male right angle cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male right angle cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W08827LF/HS-18 can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W08827LF/HS-18 is built with PE-SR402FLJ which is a corrugated coax type. The Pasternack corrugated SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance. RF specs on this 12.4 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08827LF/HS-18 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder. |
| 126 | ||
| PE3W17710/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to 4.3-10 Male Low Loss Cable 180 Inch Length Using LMR-LW600 Coax with HeatShrink., Radio frequency assembly N male to 4.3-10 male low loss cable 180 inch length using LMR-LW600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 4.3-10 male low loss cable 180 inch length using LMR-LW600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a 4.3-10 cable connection on the other. Our low loss type N to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3W17710/HS-180 can also be known as a low loss type N plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17710/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to 4.3-10 male cable has a maximum VSWR of 1.4:1. Type N plug to 4.3-10 plug cable assembly PE3W17710/HS-180 is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17710/HS-180 can also be used in the other direction and will be a 4.3-10 male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 4.3-10 cable assembly for quick shipment worldwide. Variations of type N and 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 4.3-10 low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 32 | ||
| PE3C1104/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. Mini SMP Female to 2.92mm Male Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly mini SMP female to 2.92mm male cable 18 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable 18 inch length using PE-SR405FLJ coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C1104/HS-18 can also be known as a mini SMP jack to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1104/HS-18 RF cable has a FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our Mini SMP female to 2.92mm male cable has a maximum VSWR of 1.4:1. Mini SMP jack to 2.92mm plug cable assembly PE3C1104/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable Mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold plating, while the other has the clamp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C1104/HS-18 can also be used in the other direction and will be a 2.92mm male to mini SMP female cable assembly if the opposite connectivity is required. Mini SMP jack to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini SMP to 2.92mm RF cable assembly as per your requirements. |
| 9 | ||
| PE3W17134/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. N Male to N Male Cable 18 Inch Length Using TCOM-600 Coax with HeatShrink., Pasternack’s PE3W17134/HS-18 type N male to type N male RF cable assembly using TCOM-600 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N male to type N male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17134/HS-18 can also be known as a type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17134/HS-18 RF cable has a PE jacket of 0.59-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. This PE3W17134/HS-18 type N plug to type N plug cable assembly is built with TCOM-600, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. This type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C2657/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male Right Angle to SMA Male Cable 18 Inch Length Using PE-SR402FL Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA male cable 18 inch length using PE-SR402FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male cable 18 inch length using PE-SR402FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2657/HS-18 can also be known as a right angle SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C2657/HS-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2657/HS-18 can also be used in the other direction and will be SMA male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male cable 18 inch length using PE-SR402FL coax with heatshrink. |
| 0 | ||
| PE3W11790/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMP Female to MMCX Plug Right Angle Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly SMP female to MMCX plug right angle cable 18 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to MMCX plug right angle cable 18 inch length using PE-SR405FLJ coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and right angle MMCX cable connection on the other. Our SMP to right angle MMCX cable assemblies have a female gender on end 1 and plug on end 2. PE3W11790/HS-18 can also be known as a SMP jack to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. SMP jack to MMCX male cable assembly PE3W11790/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to right angle MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMP female to MMCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11790/HS-18 can also be used in the other direction and will be right angle MMCX plug to SMP female cable assembly if the opposite connectivity is required. SMP jack to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to MMCX cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to MMCX plug right angle cable 18 inch length using PE-SR405FLJ coax with heatshrink. |
| 0 | ||
| PE3W08280/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMP Female to SMA Male Right Angle Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly SMP female to SMA male right angle cable 18 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMA male right angle cable 18 inch length using PE-SR405FLJ coax with heatshrink, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax formable cable assembly is built with SMP cable connection on one end and right angle SMA cable connection on the other. Our formable SMP to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W08280/HS-18 can also be known as a formable SMP jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA plug cable assembly PE3W08280/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 10 GHz maximum frequency SMP female to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08280/HS-18 can also be used in the other direction and will be right angle SMA male to SMP female cable assembly if the opposite connectivity is required. Formable SMP jack to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to SMA male right angle cable 18 inch length using PE-SR405FLJ coax with heatshrink. |
| 0 | ||
| PE3W05905/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMP Female Right Angle to SMP Female Right Angle Cable 18 Inch Length Using Tinned RG405 Coax with HeatShrink., Pasternack’s PE3W05905/HS-18 right angle SMP female to right angle SMP female RF cable assembly using RG405 tinned coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMP cable connection on one end and a right angle SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3W05905/HS-18 can also be known as a right angle SMP jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. Our right angle SMP female to right angle SMP female cable has a maximum VSWR of 1.4:1. This PE3W05905/HS-18 SMP jack to SMP jack cable assembly is built with RG405 tinned, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. This SMP right angle jack to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP RF cable assembly as per your requirements. |
| 0 | ||
| PE3W07880/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male Right Angle to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly N male right angle to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low loss right angle type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W07880/HS-180 can also be known as a low loss right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W07880/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W07880/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W07880/HS-180 can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W09727/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Female 4 Hole Flange to SMP Female Right Angle Cable 18 Inch Length Using PE-SR405AL Coax with HeatShrink., Radio frequency assembly SMA female 4 hole flange to SMP female right angle cable 18 inch length using PE-SR405AL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female 4 hole flange to SMP female right angle cable 18 inch length using PE-SR405AL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA 4 hole flange cable connection on one end and a right angle SMP cable connection on the other. Our SMA to right angle SMP cable assembly has a female gender on end 1 and a female on end 2. PE3W09727/HS-18 can also be known as a SMA jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. The semi-rigid RF cable has a between series connection. Our 4 hole flange SMA female to right angle SMP female cable has a maximum VSWR of 1.4:1. SMA jack to SMP jack cable assembly PE3W09727/HS-18 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W09727/HS-18 can also be used in the other direction and will be a right angle SMP female to SMA female 4 hole flange cable assembly if the opposite connectivity is required. SMA jack 4 hole flange to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP RF cable assembly as per your requirements. |
| 0 | ||
| PE3W01814/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W01814/HS-180 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01814/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W01814/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
![]() TE Connectivity | WHDS-18-2 | TE Connectivity | STRAIN RELIEF, HD30, 18SZ, RA Primary Product Material: Steel Automotive Connector Accessory Type: Strain Relief Operating Temperature Range: -55 – 125 °C Operating Temperature Range: -67 – 257 °F Steel Strain Relief | Automotive Connector Accessories | Part Number: WHDS-18-2 | Internal Number: WHDS-18-2 | Alias Number: ZPF000000000131686 | TE Connectivity RoHS : Compliant |
| 949 | |
| WHDS-18-1 | TE Connectivity | STRAIN RELIEF, HD30, 18SZ, ST Primary Product Material: Steel Automotive Connector Accessory Type: Strain Relief Operating Temperature Range: -55 – 125 °C Operating Temperature Range: -67 – 257 °F Steel Strain Relief | Automotive Connector Accessories | Part Number: WHDS-18-1 | Internal Number: WHDS-18-1 | Alias Number: ZPF000000000131685 | TE Connectivity RoHS : Compliant |
| 48 | ||
| HSC100S18RJ | TE Connectivity | HSC100S 18R 5% Screw Terminal Resistance Value: 18 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 18 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S18RJ | Internal Number: 3-2176731-1 | TE Connectivity RoHS : Compliant |
| 24 | ||
| HSC150S18KJ | TE Connectivity | HSC150S 18K 5% Screw Terminal Resistance Value: 18K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistors: Aluminium Housed & Hsc | 18K Ω Wire Wound 5 % Power Resistor | Part Number: HSC150S18KJ | Internal Number: 6-2176732-4 | TE Connectivity RoHS : Compliant |
| 21 | ||
| HSC100S180RJ | TE Connectivity | HSC100S 180R 5% Screw Terminal Resistance Value: 180 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 180 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S180RJ | Internal Number: 4-2176731-3 | TE Connectivity RoHS : Compliant |
| 14 | ||
![]() Venkel Ltd. | WRFI0603-S-18NKT | VENKEL LTD | Wirewound RF Inductor;0603;18nH;�10% RoHS : Not Compliant | 8,000 | ||
| WRFI0603-S-18NJT | VENKEL LTD | Wirewound RF Inductor;0603;18nH;�5% RoHS : Not Compliant | 4,000 | |||
| SHPI121245S-181MU | VENKEL LTD | Shielded High Power Inductor;121245;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| WRFI0603-S-18NGT | VENKEL LTD | Wirewound RF Inductor;0603;18nH;�2% RoHS : Not Compliant | 0 | |||
| WRFI0805-S-18NGT | VENKEL LTD | Wirewound RF Inductor;0805;18nH;�2% RoHS : Not Compliant | 0 | |||
| WRFI1008-S-18NJT | VENKEL LTD | Wirewound RF Inductor;1008;18nH;�5% RoHS : Not Compliant | 0 | |||
| SS18W-EVL | VENKEL LTD | Rectifier;SMA;80V;1A RoHS : Not Compliant | 0 | |||
| SHPI121260S-181MU | VENKEL LTD | Shielded High Power Inductor;121260;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| SHPI121280S-180MU | VENKEL LTD | Shielded High Power Inductor;121280;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| WRFI0603-S-18NGT-13 | VENKEL LTD | Wirewound RF Inductor;0603;18nH;�2% RoHS : Not Compliant | 0 | |||
| SHPI737345S-180MU | VENKEL LTD | Shielded High Power Inductor;737345;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| WRFI0805-S-18NKT | VENKEL LTD | Wirewound RF Inductor;0805;18nH;�10% RoHS : Not Compliant | 0 | |||
| SHPI626650S-181MU | VENKEL LTD | Shielded High Power Inductor;626650;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| SHPI626630S-181MU | VENKEL LTD | Shielded High Power Inductor;626630;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| SHPI737334S-180MU | VENKEL LTD | Shielded High Power Inductor;737334;Standard;18uH;�20% RoHS : Compliant | 0 | |||
![]() Vyrian | DS1818-10+ | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.88V, CMOS RoHS : Compliant | 12,280 | ||
| DS1806E-100+T&R | Analog Devices Inc | Digital Potentiometer, 100000ohm, 3-wire Serial Control Interface, 64 Positions, PDSO20 RoHS : Compliant | 11,697 | |||
| DS1813-15+ | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4.13V RoHS : Compliant | 11,626 | |||
| DS1804U-050+T&R | Analog Devices Inc | Digital Potentiometer, 1 Func, 50000ohm, Increment/decrement Control Interface, 100 Positions, PDSO8 RoHS : Compliant | 11,486 | |||
| DS1811R-15+T&R | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4.13V, CMOS, PDSO3 RoHS : Compliant | 10,646 | |||
| DS1806N-100 | Analog Devices Inc | Digital Potentiometer, 1 Func, 100000ohm, 3-wire Serial Control Interface, 64 Positions, PDIP20 RoHS : Not Compliant | 10,206 | |||
| DS1804U-050+TR | Analog Devices (Maxim Integrated) | 10,058 | ||||
71V35761S183BGG8![]() | Integrated Device Technology Inc | Cache SRAM, 128KX36, 3.3ns, CMOS, PBGA119 RoHS : Compliant | 9,514 | |||
| DS1804X-010-T-R | Analog Devices (Maxim Integrated) | 8,495 | ||||
| DS1809U-100-T-R | Analog Devices (Maxim Integrated) | 6,242 | ||||
| DS1817-10-T-R | Analog Devices (Maxim Integrated) | 6,136 | ||||
| DS1809Z-100/TR | Analog Devices Inc | Interface Circuit RoHS : Unknown | 5,154 | |||
| NCP59301DS18R4G | onsemi | Fixed Positive LDO Regulator, 1.8V, 0.5V Dropout, BIPolar, PSSO5 RoHS : Compliant | 4,975 | |||
1PS184,135![]() | NXP Semiconductors | Rectifier Diode, 2 Element, 0.215A, 85V V(RRM), Silicon RoHS : Compliant | 4,910 | |||
DS1812-5/T&R![]() | Maxim Integrated Products | Power Supply Support Circuit, Fixed, 1 Channel, +4.62VV, CMOS, PBCY3 RoHS : Not Compliant | 396 | |||
![]() Win Source Electronics | LS4148-GS18 | Vishay Huntington | DIODE GEN PURP 75V 150MA SOD80 |
| 345,664 | |
| NCP163AFCS180T2G | onsemi | IC REG LINEAR 1.8V 250MA 4WLCSP / Linear Voltage Regulator IC Positive Fixed 1 Output 250mA 4-WLCSP (0.64x0.64) RoHS : Compliant |
| 205,690 | ||
| DS18B20 | Nexperia | 11 B -55 ~ 125C 1-WIRE DIGITAL, |
| 160,000 | ||
| PTVS18VS1UR | Nexperia | 400 W Transient Voltage Suppressor RoHS : Compliant |
| 96,337 | ||
| 62783G-S18-R | United Technologies Corporation | 8 BJT SOP-18-300mil Bipolar Transistor Arrays RoHS |
| 50,000 | ||
| ADBMS1818ASWZ-RL | Analog Devices Inc | 18-CELL BATTERY MONITOR WITH DAI / Battery Battery Monitor IC Multi-Chemistry 64-LQFP-EP (10x10) RoHS : Compliant |
| 40,000 | ||
DS1803E-100+T&R![]() | Maxim Integrated Products | Digital Potentiometer 256POS 100k Ohm 2Pot 14-Pin TSSOP T/R RoHS : Compliant |
| 37,590 | ||
| DS1818R-10+T | Maxim Integrated Products |
| 30,780 | |||
| DS18B20U+T&R | Maxim Integrated Products | SENSOR TEMPERATURE 1-WIRE 8UMAX RoHS : Compliant |
| 18,240 | ||
DS1816R-10![]() | Maxim Integrated Products | RoHS : Not Compliant |
| 18,000 | ||
DS1830A+![]() | Maxim Integrated Products | IC SEQUENCER RESET PB 3.3V 8-DIP RoHS : Compliant |
| 11,433 | ||
DS1813R-10![]() | Maxim Integrated Products | Processor Supervisor 4.35V 1 Active Low/Open Drain 3-Pin SOT-23 / IC 4.35V W/PB 10% SOT23-3 RoHS : Not Compliant |
| 6,733 | ||
SN75ALS180DRG4![]() | Texas Instruments | IC DIFF LINE DRVR/RCVR 14-SOIC RoHS : Compliant |
| 3,190 | ||
| DS1845E-010-TR | Maxim Integrated Products |
| 3,000 | |||
| EP2S180F1020I4 | Intel Corporation | IC FPGA 742 I/O 1020FBGA RoHS : Not Compliant |
| 500 | ||
![]() Wuhan P&S | SM8S18AHE3_A/I | Vishay Intertechnologies | Surface Mount Transient Voltage Suppressors RoHS : Compliant |
| 27,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |