 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
S18V2AJ-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Avnet Americas | MLG1005S18NJT000 | TDK Corporation | Multilayer Inductor, 18 nH, 0.6 ohm, 2 GHz, 350 mA, 0402 [1005 Metric], MLG Series - Tape and Reel (Alt: MLG1005S18NJT000) RoHS : Compliant |
| 30,000 | |
| STRVS185X02B | STMicroelectronics | Diode TVS Single Uni-Dir 128V 2-Pin DO-214AA T/R - Tape and Reel (Alt: STRVS185X02B) RoHS : Compliant |
| 25,000 | ||
| LS4148-GS18 | Vishay Intertechnologies | - Tape and Reel (Alt: LS4148-GS18) RoHS : Compliant |
| 10,000 | ||
| MPZ1608S181ATDH5 | TDK Corporation | Ferrite Bead, 0603 [1608 Metric], 180 ohm, 2 A, MPZ Series, 0.05 ohm, ? 25% - Tape and Reel (Alt: MPZ1608S181ATDH5) RoHS : Compliant |
| 8,000 | ||
| MPZ1608S181ATAH0 | TDK Corporation | Ferrite Bead, 0603 [1608 Metric], 180 ohm, 2 A, MPZ Series, 0.05 ohm, ? 25% - Tape and Reel (Alt: MPZ1608S181ATAH0) RoHS : Compliant |
| 4,000 | ||
| 600S180FW250XT | Kyocera AVX Components | - Tape and Reel (Alt: 600S180FW250XT) RoHS : Not Compliant |
| 2,000 | ||
ASPI-6045S-180M-T | Abracon Corporation | - Tape and Reel (Alt: ASPI-6045S-180M-T) RoHS : Compliant |
| 1,500 | ||
| RWR80S1821FRS70 | Vishay Intertechnologies | Through Hole Resistor, 1.82 kohm, RWR Series, 2 W, ? 1%, Axial Leaded, Wirewound, ? 20ppm/?C - Tape and Reel (Alt: RWR80S1821FRS70) RoHS : Not Compliant |
| 1,000 | ||
| ECS-18-13-1X | ECS International Inc | Crystal, 1.8432 MHz, Through Hole, 11.35mm x 4.65mm, 50 ppm, 13 pF, 30 ppm, HC-49UX Series - Bulk (Alt: ECS-18-13-1X) RoHS : Compliant |
| 491 | ||
| RWR84S1820FSBSL | Vishay Intertechnologies | Through Hole Resistor, 182 ohm, RWR Series, 7 W, ? 1%, Axial Leaded, Wirewound, ? 20ppm/?C - Bulk (Alt: RWR84S1820FSBSL) RoHS : Not Compliant |
| 100 | ||
| RWR81S1870FRB12 | Vishay Intertechnologies | Through Hole Resistor, 187 ohm, RWR Series, 1 W, ? 1%, Axial Leaded, Wirewound, ? 20ppm/?C - Bulk (Alt: RWR81S1870FRB12) RoHS : Not Compliant |
| 75 | ||
| AHDPBS-18-002 | Amphenol Corporation | - Boxed Product (Development Kits) (Alt: AHDPBS-18-002) RoHS : Compliant |
| 68 | ||
| MTLW-103-05-G-S-185 | Samtec Inc | Pin Header, Board-to-Board, 2.54 mm, 1 Rows, 3 Contacts, Through Hole, MTLW Series - Bulk (Alt: MTLW-103-05-G-S-185) RoHS : Compliant |
| 38 | ||
| REF45W1ZVS184LMTOBO2 | Infineon Technologies AG | REF45W1ZVS184LMTOBO2 - Boxed Product (Development Kits) (Alt: REF45W1ZVS184LMTOBO2) RoHS : Not Compliant |
| 1 | ||
| A8504952S18W | Amphenol Corporation | - Bulk (Alt: A8504952S18W) RoHS : Not Compliant |
| 1 | ||
 Newark | AP2125KS-1.8TRG1 | Diodes Incorporated | Ldo, Dc-Dc Conv, 1.8V, 0.36A, Sc-70; |Diodes Inc. AP2125KS-1.8TRG1 RoHS : Compliant |
| 6,506 | |
| AP2125KS-1.8TRG1 | Diodes Incorporated | Ldo, Dc-Dc Conv, 1.8V, 0.36A, Sc-70; |Diodes Inc. AP2125KS-1.8TRG1 RoHS : Compliant |
| 6,506 | ||
LD1117S18CTR | STMicroelectronics | Ldo Vlt Reg, 1.8V, 0.95A, Sot-223-3; |Stmicroelectronics LD1117S18CTR RoHS : Compliant |
| 4,494 | ||
| LD1117S18CTR | STMicroelectronics | Ldo Vlt Reg, 1.8V, 0.95A, Sot-223-3; |Stmicroelectronics LD1117S18CTR RoHS : Compliant |
| 4,494 | ||
| MTLW-104-05-G-S-186 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 4Pos; |Samtec, Inc. MTLW-104-05-G-S-186 RoHS : Compliant |
| 1,838 | ||
| MTSW-106-07-L-S-180 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 6Pos; |Samtec, Inc. MTSW-106-07-L-S-180 RoHS : Compliant |
| 1,328 | ||
| MTMM-104-04-T-S-185 | Samtec Inc | Pin Header, Mtmm-104-04-T-S-185; |Samtec, Inc. MTMM-104-04-T-S-185 RoHS : Compliant |
| 1,213 | ||
| MTSW-110-07-S-S-180 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 10Pos; |Samtec, Inc. MTSW-110-07-S-S-180 RoHS : Compliant |
| 888 | ||
| MTLW-106-05-T-S-185 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 6Pos; |Samtec, Inc. MTLW-106-05-T-S-185 RoHS : Compliant |
| 869 | ||
| MTLW-114-05-T-S-180 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 14Pos; |Samtec, Inc. MTLW-114-05-T-S-180 RoHS : Compliant |
| 305 | ||
| MTMM-122-05-S-S-185 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 22Pos; |Samtec, Inc. MTMM-122-05-S-S-185 RoHS : Compliant |
| 228 | ||
| SMS18PDH3 | SOURIAU-SUNBANK | Rectangular Power Housing, Plug, Cable; |Souriau-Sunbank/eaton SMS18PDH3 RoHS : Compliant |
| 108 | ||
| RTS1BS18N23SHEC03R | Amphenol Sine Systems | Circular Connector, Rcpt, 23Pos, Crimp; Connector Type:Circular Industrial; Product Range:Ecomate Aquarius Series; Circular Connector Shell Style:Cable Mount Receptacle; No. Of Contacts:23Contacts; Coupling Style:Bayonet Rohs Compliant: Yes RoHS : Compliant |
| 50 | ||
| S18LGRYPQ | Banner Engineering Corp | Barrel Mount Indicator, Gry, 18Mm, 30Vdc; |Banner Engineering S18LGRYPQ RoHS : Compliant |
| 15 | ||
| S18AW3D | Banner Engineering Corp | Photoelectric Sensor, S18; |Banner Engineering S18AW3D RoHS : Compliant |
| 12 | ||
 Analog Devices Inc | DS1822+ | Analog Devices Inc | Econo 1-Wire Digital Thermomet RoHS : Compliant |
| 49,395 | |
| DS1819AR-5+T&R | Analog Devices Inc | 5 Volt and 3.3 Volt MicroMonit RoHS : Compliant |
| 22,147 | ||
| DS1882E-050+ | Analog Devices Inc | Dual Log Audio Digital Potenti RoHS : Compliant |
| 18,050 | ||
| LTC2369IMS-18#PBF | Analog Devices Inc | 18-B, 1.6Msps, Pseudo- Diff Un RoHS : Compliant |
| 7,551 | ||
| LTC2364HMS-18#PBF | Analog Devices Inc | 18-B, 250ksps, Pseudo-Diff Uni RoHS : Compliant |
| 7,073 | ||
| DS1825U+ | Analog Devices Inc | Programmable Resolution 1-Wire RoHS : Compliant |
| 459 | ||
| DS18B20U+T&R | Analog Devices Inc | Programmable Resolution 1-Wire RoHS : Compliant |
| 277 | ||
| DS1813-5+T&R | Analog Devices Inc | 5V EconoReset with Pushbutton RoHS : Compliant |
| 95 | ||
| MAXREFDES182# | Analog Devices Inc | MAXREFDES182#: TWS Earbud and |
| 29 | ||
| DS1816R-5-U+ | Analog Devices Inc | 3.3V EconoReset with Open Drai RoHS : Compliant | 0 | |||
| DS1809U-010+T&R | Analog Devices Inc | Dallastat RoHS : Compliant |
| 0 | ||
| DS1811R-10-U+ | Analog Devices Inc | 5V EconoReset with Open Drain RoHS : Compliant | 0 | |||
| LTC2326HMS-18#TRPBF | Analog Devices Inc | 18-B, 250ksps, ±10.24V True Bi RoHS : Compliant |
| 0 | ||
| LTC2376IMS-18#TRPBF | Analog Devices Inc | 18-B, 250ksps, L Pwr SAR ADC w RoHS : Compliant |
| 0 | ||
| DS1803E-100+T&R | Analog Devices Inc | Addressable Dual Digital Poten RoHS : Compliant |
| 0 | ||
 RS | NAS1831AC4C10 | RAF Electronic Hardware | ALUMINUM HEX FEMALE STANDOFF/IRIDITE PLATE |
| 48 | |
| VS18S511DF213A | Norgren | SOLENOID VALVE, DOUBLE ACTING, 24VDC, 5/2, VS18 SERIES |
| 23 | ||
| S18RW3DLQ1 (35150) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, DIFFUSE, 300MM, 20-250VAC, SSAC, QD, S18 |
| 10 | ||
| BOS00K1 (BOS 18KF-PA-1PE-S4-C) | Balluff Inc | SENSOR, PHOTOELECTRIC DIFFUSE, M18, INFRARED, 700MM, PNP, LO/DO, M12, BOS SERIES |
| 9 | ||
| S8VS-18024A (S8VS18024A) | OMRON Industrial Automation | AC-DC POWER SUPPLY, 24V, 7.5A, 85-264V, ENCLOSED, PFC, 180W, S8VS SERIES |
| 8 | ||
| 121064-0579 (S18209TC421) | Woodhead Molex | DIN VALVE, FORM A, 2 POLE, TRANSPARENT, NBR PROFILE GASKET/SCREW, S18209TC421 |
| 8 | ||
| S18RW3R (29825) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, RECEIVER, 20M, 20-250VAC, SSAC, CABLE, S18 |
| 7 | ||
| NI8-S18-AP6X-H1141 (46526) | TURCK Inc | PROXIMITY SENSOR, M18, 8MM RANGE, 3 WIRE, 10-30VDC, M12, T4656200 |
| 5 | ||
| NI8-S18-AD4X (44562) | TURCK Inc | PROXIMITY SENSOR,8MM SENSING DISTANCE,18MM BARREL, NO,2WIRE DC, NON-FLUSH |
| 3 | ||
| BI5-S18-AZ3X/S100 (1373400) | TURCK Inc | INDUCTIVE PROX 5MM SENSING DISTANCE NO AC/DC FLUSH MOUNT |
| 3 | ||
| VPPM-12L-L-1-G12-0L10H-LK-S1 (8024266) | Festo | PROPORTIONAL-PRESSURE REGULATOR, 3 WAY, G1/2, 1-10 BAR REG RANGE, 7000L/MIN |
| 2 | ||
| CLS18-SMNM-03.00F | Amphenol Times Microwave Systems | TEST CABLE, ARMORED, 18 GHZ MA, MALE-N MALE, 3FT, CLARITY SERIES |
| 1 | ||
| HWS1800T-24 (HWS1800T24) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,24V,75A,85-265V IN, ENCLOSED, PANEL MOUNT, PFC, HWS1800T SERIES |
| 1 | ||
| BOS01NE (BOS 18M-PA-LR20-S4) | Balluff Inc | PHOTOELECTRIC SENSOR;LASER;CONNECTOR; SWITCHING OUTPUT PNP(NC);PNP(NO) PINS 4-2 |
| 1 | ||
| S18 | Klein Tools Inc | 9/16" HOLLOW SHANK NUT DRIVER; 4" SHANK |
| 0 | ||
 STMicroelectronics | LDL1117S18R | STMicroelectronics | 1.2 A High PSRR low dropout linear voltage regulator RoHS : Compliant |
| 18,121 | |
TS1852IDT | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 3,428 | ||
| STRVS185X02B | STMicroelectronics | ST Repetitive Voltage Suppressor RoHS : Compliant |
| 195 | ||
L78S18CV | STMicroelectronics | positive voltage regulator RoHS : Compliant |
| 133 | ||
TS1871IYLT | STMicroelectronics | 1.8V Input/Output Rail-to-Rail Low Power Operational Amplifiers RoHS : Compliant |
| 0 | ||
TS1854IPT | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
| TS1871IDT | STMicroelectronics | 1.8V Input/Output Rail-to-Rail Low Power Operational Amplifiers RoHS : Compliant |
| 0 | ||
| TS1872AIYDT | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
| TS1871AIYLT | STMicroelectronics | 1.8V Input/Output Rail-to-Rail Low Power Operational Amplifiers RoHS : Compliant |
| 0 | ||
| TS1874IPT | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
TS1874AIDT | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
| TS1851ILT | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
| TS1872IYDT | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
LFTVS18-1F3 | STMicroelectronics | 20 A - 8/20 ?s, 12 V TVS in CSP P 0.4 mm RoHS : Compliant |
| 0 | ||
| TS1851IDT | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
 Microchip Technology Inc | MCP1826S-1802E/AB | Microchip Technology Inc | 1.0A LDO, TO-220, Projected EOL: 2036-09-05 RoHS : Compliant |
| 18,340 | |
| MCP1755S-1802E/MC | Microchip Technology Inc | 16v, 300 mA low quiescent current LDO with shutdown, DFN, Projected EOL: 2040-12-26 RoHS : Compliant |
| 17,100 | ||
| MCP1825S-1802E/AB | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, TO-220, Projected EOL: 2036-09-05 RoHS : Compliant |
| 15,150 | ||
| MCP1825S-1802E/DBVAO | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, SOT-223, Projected EOL: 2051-01-09 RoHS : Compliant |
| 13,182 | ||
MCP1826S-1802E/EB | Microchip Technology Inc | 1.0A LDO, DDPAK, Projected EOL: 2036-09-05 RoHS : Compliant |
| 11,200 | ||
MCP1827S-1802E/EB | Microchip Technology Inc | 1.5A LDO Regulator, DDPAK, Projected EOL: 2036-09-06 RoHS : Compliant |
| 9,850 | ||
| MCP1825S-1802E/EB | Microchip Technology Inc | 500MA LOW VOLTAGE, LOW IQ LDO, DDPAK, Projected EOL: 2036-09-05 RoHS : Compliant |
| 5,000 | ||
| MCP1826S-1802E/DB | Microchip Technology Inc | 1.0A LDO, SOT-223, Projected EOL: 2036-09-05 RoHS : Compliant |
| 4,134 | ||
| MCP1825S-1802E/DB | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, SOT-223, Projected EOL: 2036-09-05 RoHS : Compliant |
| 1,384 | ||
| MCP1827S-1802E/AB | Microchip Technology Inc | 1.5A LDO Regulator, TO-220, Projected EOL: 2036-09-06 RoHS : Compliant |
| 1,000 | ||
MCP23S18-E/SP | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with 12C Interface, SPDIP, Projected EOL: 2036-09-30 RoHS : Compliant |
| 420 | ||
MCP23S18-E/SO | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with 12C Interface, SOIC, Projected EOL: 2036-09-30 RoHS : Compliant |
| 296 | ||
| AC31S18A | Microchip Technology Inc | AVR Programming Adapter, Projected EOL: |
| 283 | ||
MCP23S18-E/MJ | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with I2C Interface, QFN, Projected EOL: 2036-10-02 RoHS : Compliant |
| 27 | ||
| AT68166H-YS18-E | Microchip Technology Inc | 16Mbit 512Kx32 SRAM MCM,18ns Prot, CQFP, Projected EOL: 2040-12-03 - Contact for Pricing RoHS : Compliant | 3 | |||
 Bisco Industries | NAS1801-3-17 | Heartland Precision Fasteners Inc | 36,329 | |||
| NAS1801-06-5 | Heartland Precision Fasteners Inc | 33,461 | ||||
| NAS1802-06-4 | Parker Fasteners | 3,156 | ||||
| NAS1801-3-17 | NAS HEX CAP SCREWS | 163 | ||||
| NAS1802-06-4 | Saturn Fasteners Inc | 55 | ||||
| NAS1829AC3C05 | RAF Electronic Hardware | 46 | ||||
| NAS1802-06-4 | Mac Fastteners Inc | 26 | ||||
| NAS1829-4C12 | Lyn-Tron Inc | 14 | ||||
| NAS1801-06-5 | Mac Fastteners Inc | 11 | ||||
| NAS1802-3-16 | Mac Fastteners Inc | 10 | ||||
| NAS1801-06-5 | NAS HEX CAP SCREWS | 7 | ||||
| NAS1829-4C12 | RAF Electronic Hardware | 6 | ||||
| NAS1802-06-17 | NAS HEX CAP SCREWS | 2 | ||||
| NAS1802-3-16 | NAS HEX CAP SCREWS | 2 | ||||
| NAS1802-06-4 | NAS HEX CAP SCREWS | 1 | ||||
 Rochester Electronics | BLC8G27LS-180AVY | NXP Semiconductors | RF Power Field-Effect Transistor, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant |
| 50 | |
| DS1806E-050+TR | Analog Devices Inc | Digital Sextet Potentiometer |
| 5,000 | ||
LP38511TS-1.8/NOPB | Texas Instruments | IC INTERFACE Transceiver RS422, RS485 20Mbps 4.5V - 5.5V 10-SOP Tube RoHS : Compliant |
| 24,435 | ||
AM27S181/BKA | AMD | OTP ROM, 128KX8, 150ns, Bipolar, CDFP24 RoHS : Not Compliant |
| 1,602 | ||
| BLC8G27LS-180AVY | Ampleon | RF Power Field-Effect Transistor, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant |
| 633 | ||
FLS1800XS | Fairchild Semiconductor Corporation | 260W - Half-Bridge LLC Resonant Control IC for Lighting RoHS : Compliant |
| 1,926 | ||
DS1804X-050/T&R | Maxim Integrated Products | DS1804 NV Trimmer Potentiometer RoHS : Not Compliant |
| 9,865 | ||
| DS1806S-050+ | Maxim Integrated Products | DS1806 Digital Sextet Potentiometer RoHS : Compliant |
| 5,843 | ||
DS1809-050 | Maxim Integrated Products | Digital Potentiometer RoHS : Not Compliant |
| 2,831 | ||
| DS1847E-050 | Maxim Integrated Products | Digital Potentiometer, 2 Func, 50000ohm, 2-wire Serial Control Interface, 256 Positions, PDSO14 RoHS : Not Compliant |
| 3 | ||
| LP38511TS-1.8/NOPB | National Semiconductor Corporation | IC INTERFACE Transceiver RS422, RS485 20Mbps 4.5V - 5.5V 10-SOP Tube RoHS : Compliant |
| 9,606 | ||
| NP80N03MLE-S18-AY | Renesas Electronics Corporation | Power Field-Effect Transistor, 80A I(D), 30V, 0.011ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Compliant |
| 300 | ||
| NP80N06MLG-S18-AY | Renesas Electronics Corporation | Power Field-Effect Transistor, 80A I(D), 60V, 0.0086ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Compliant |
| 22,100 | ||
| LD1117S18CTR | STMicroelectronics | IC VOLT REG Fixed 1 REG 1.8V 800mA SOT223 T/R RoHS : Compliant |
| 0 | ||
| AS183-92LF | Skyworks Solutions Inc | SPDT, 0.3MHz Min, 2500MHz Max, 0.6dB Insertion Loss-Max RoHS : Compliant |
| 14,000 | ||
 Sager | MTLW-104-05-G-S-186 | Samtec Inc | Headers & Wire Housings .100 Low Profile Variable Post Height Terminal Strip |
| 1,838 | |
| MTSW-106-07-L-S-180 | Samtec Inc | Headers & Wire Housings Variable Height PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 1,328 | ||
| MTSW-110-07-S-S-180 | Samtec Inc | Headers & Wire Housings Variable Height PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 888 | ||
| 62S18-H9-050C | Grayhill Inc | Encoders 62S18-H9-050C RoHS : Compliant |
| 0 | ||
| MTSW-129-07-F-S-180 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-140-24-T-S-180-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TW-46-11-F-S-185-090 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| WS18433B02 | Panduit Corp | HARNESS,BUZZER *HA-58901RPLCS:WS18433B01 |
| 0 | ||
| MPAS-180-ZSGG-15B | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| MTSW-102-08-F-S-185-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-104-28-F-S-185 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-105-06-T-S-180 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTLW-103-07-G-S-185 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTLW-103-08-T-S-187 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTLW-103-10-T-S-189-02 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
 Coilcraft Direct | 0805CS-180XJRC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 29,741 | |
| 1206CS-181XJRC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, Halogen Free RoHS : Compliant |
| 8,436 | ||
| 1206CS-181XGLC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant |
| 7,759 | ||
| 1008LS-182XJRC | Coilcraft Inc | RF inductor, ferrite core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 7,063 | ||
| 0805LS-182XGEC | Coilcraft Inc | RF inductor, ferrite core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 4,884 | ||
| 0805CS-182XGEC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 2,864 | ||
| 0603CS-18NXJLW | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 2,678 | ||
| 0603CS-18NXJL | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 2,678 | ||
| 0805LS-182XJLC | Coilcraft Inc | RF inductor, ferrite core, 5% tol, SMT, RoHS RoHS : Compliant |
| 1,957 | ||
| 1812CS-182XGRC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 780 | ||
| 0603CS-18NXGEW | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 45 | ||
| 0603CS-18NXGE | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 45 | ||
| 0805LS-182XJLD | Coilcraft Inc | RF inductor, ferrite core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1008CS-182XFEC | Coilcraft Inc | RF inductor, ceramic core, 1% tol, SMT, RoHS Halogen Free RoHS : Compliant | 0 | |||
| 0805HS-180TJRC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
 TME | BOS 18KF-PA-1PD-S4-C | Balluff Inc | Sensor: photoelectric; Range: 0÷0.4m; PNP; DARK-ON,LIGHT-ON; 100mA |
| 11 | |
| AS 18 L PC / METALOC | Metabo Power Tools | Transport cart |
| 5 | ||
| CS 180 | Eaton Corporation | Vent; A: 335mm; B: 214mm; C: 55mm; D: 69mm; E: 76mm; F: 29mm; G: 17mm |
| 3 | ||
| AHDPBS-18-002 | Amphenol Corporation | Connector: automotive RoHS : Compliant |
| 0 | ||
| BA-S 180806 F-7035 | Bopla | Enclosure: multipurpose; X: 86mm; Y: 199mm; Z: 60mm; BOCUBE ALU; grey |
| 0 | ||
| BE96AS/1/8 | Beta Electric | Wrench: hex key; HEX 1/8"; Overall len: 60mm; oxidized |
| 0 | ||
| BOS 18KW-PA-1PD-S4-C | Balluff Inc | Sensor: photoelectric; Range: 0÷0.4m; PNP; DARK-ON,LIGHT-ON; 100mA |
| 0 | ||
| BV302S18015 | ZETTLER Magnetics Inc | Transformer: encapsulated; 1.5VA; 230VAC; 18V; 83mA; PCB |
| 0 | ||
| BZT55B8V2-GS18 | Vishay Intertechnologies | Diode: Zener; 0.5W; 8.2V; SMD; SOD80; single diode RoHS : Compliant |
| 0 | ||
| BZT55C5V1-GS18 | Vishay Intertechnologies | Diode: Zener; 0.5W; 5.1V; SMD; SOD80; single diode RoHS : Compliant |
| 0 | ||
| D7L70S185W-135 | Advanced Thermal Solutions Inc | Heatsink: heat pipe; round; natural; L: 70mm; copper; raw; Ø: 7mm |
| 0 | ||
| SMP-MSLD-PCS18T | Amphenol RF | Connector: coaxial; socket; male; SMP; SMT; on PCBs; straight; brass |
| 0 | ||
SN75ALS180D | Texas Instruments | IC: interface; transceiver; half duplex,RS422 / RS485; SO14; tube RoHS : Compliant |
| 0 | ||
| SW-KS-181 | Ingun Prufmittelbau GmbH | Tool: mounting tool; SW-KS; rigid |
| 0 | ||
| TPSA225K016S1800 | Kyocera AVX Components | Capacitor: tantalum; 2.2uF; 16VDC; SMD; A; 1206; ±10%; -55÷125°C; TPS RoHS : Compliant |
| 0 | ||
 ComSIT USA | DS1825U+TR | DALLAS SEMI/MAXIM INTEGRATED/ANALOG DEVICES | AVAILABLE EU | 25 | ||
| 600S180FT250XT | AMERICAN TECHNICAL CERAMICS/AVX/KYOCERA AVX | AVAILABLE EU | 1,496 | |||
| S1812R152K | API Delevan | AVAILABLE EU | 317 | |||
| DS1845E010+TR | Maxim Integrated Products | AVAILABLE EU | 2,017 | |||
| 0603CS18NXJLW | Coilcraft Inc | AVAILABLE EU | 3,932 | |||
| DS1818R20+TR | Analog Devices Inc | AVAILABLE EU | 461 | |||
ComSIT USA | TZMC18GS18 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 18V V(Z), 5%, 0.5W, Silicon, Unidirectional, DO-213AA RoHS : Compliant | 90,000 | ||
| ZMY4V3GS18 | Vishay Intertechnologies | ZENER DIODE Zener Diode, 4.3V V(Z), 6.98%, 1W, Silicon, Unidirectional, DO-213AB RoHS : Compliant | 30,000 | |||
| TZMC7V5GS18 | Vishay Intertechnologies | Zener Diode, 7.5V V(Z), 6.7%, 0.5W RoHS : Not Compliant | 28,155 | |||
| VSMB3942X01GS18 | Vishay Intertechnologies | Electronic Component RoHS : Compliant | 24,000 | |||
| TZM5255BGS18 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 28V V(Z), 5%, 0.5W, Silicon, Unidirectional, DO-213AA RoHS : Compliant | 20,000 | |||
| BZT55C7V5GS18 | Vishay Intertechnologies | Zener Diode, 7.5V V(Z), 0.5W, Silicon, Unidirectional RoHS : Not Compliant | 20,000 | |||
| BZT52C18GS18 | v | SMALL SIGNAL ZENER DIODE Zener Diode, 18V V(Z), 6.6%, 0.5W, Silicon, Unidirectional RoHS : Compliant | 10,000 | |||
| VLMG31L1M2GS18 | Vishay Semiconductors | STANDARD SMD LED PLCC-2 Single Color LED, Green, Clear Nondiffused, 2.4mm RoHS : Compliant | 8,000 | |||
| AAT3221IJS18T1 | Skyworks Solutions Inc | IC VOLT REG Fixed 1 REG 1.8V 150mA 8-SOJ T/R RoHS : Compliant | 5,985 | |||
| VLMB31K1L23GS18 | Vishay Intertechnologies | Mini LED assembly RoHS : Compliant | 5,660 | |||
| TS1871IYLT | STMicroelectronics | 1.8V INPUT/OUTPUT RAIL-TO-RAIL LOW POWER OPERATIONAL AMPLIFIER Operational Amplifier, 1 Func, 6000uV Offset-Max, BICMOS, PDSO5 RoHS : Compliant | 3,000 | |||
| PTS181213V075 | Eaton Bussmann | DC SURFACE MOUNT PTC RESISTOR PTC Thermistor, Surface Mount RoHS : Compliant | 2,000 | |||
| VS18TQ045 | Vishay Intertechnologies | SCHOTTKY RECTIFIER, 18 A Rectifier Diode, Schottky, 1 Phase, 1 Element, 18A, 45V V(RRM), Silicon, TO-220AC RoHS : Not Compliant | 550 | |||
| VES1877A | VLSI Technology Inc | Electronic Component RoHS : Not Compliant | 27 | |||
| DS18185+ | Maxim Integrated Products | Supervisory Circuit 3.06V TO-226-3 Bag RoHS : Compliant | 20 | |||
 Interstate Connecting Components | A8504931S18X | Amphenol PCD | M8504931S18X | 0 | ||
| 85333KS1831PN | SOURIAU-SUNBANK | J6203 | 0 | |||
| 85333RS1831SN | SOURIAU-SUNBANK | J6205 | 0 | |||
| 85334RS1831PN48 | SOURIAU-SUNBANK | 0 | ||||
| A85049111S18TX056D | Amphenol PCD | M85049111S18TX05-6D | 0 | |||
| A85049144S18X106 | Amphenol PCD | M85049144S18X10-6 | 0 | |||
| A85049146S18X03 | Amphenol PCD | M85049146S18X03 | 0 | |||
| M83723/82S18316 L/C | Conesys | WALL MT RECEPT, SOCKET, 83723 SIII THREA |
| 0 | ||
| M83723/84S18088 | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII THREA |
| 0 | ||
| M83723/85S18087 L/C | Conesys | JAM NUT RECEPT, PIN, 83723 SIII THREADED |
| 0 | ||
| M83723/85S18319 | Conesys | JAM NUT RECEPT, PIN, 83723 SIII THREADED |
| 0 | ||
| M83723/97S18318 | Conesys | SELF LOCK, RFI PLUG, SOCKET, 83723 SIII |
| 0 | ||
| M83723/98S18146 | Conesys | SELF LOCK RFI PLUG, PIN, 83723 SIII THRE |
| 0 | ||
| M85049/109S18TZ08-6D | Glenair Inc | Enhanced Durability Constructed using premium materials Glenair backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/R RoHS : Compliant | 0 | |||
| M85049/109S18TZ08-6D | Amphenol PCD | M85049109S18TZ08-6D | 0 | |||
 NexGen Digital | RMC16S-181JTH50K | Kamaya Inc | 18,000 | |||
| RMC1/16S-181JTH99 | Kamaya Inc | 6,634 | ||||
| LQG15HS18NJ02D | Murata Manufacturing Co Ltd | RoHS : Compliant | 5,167 | |||
| 0805CS180XJBC | Coilcraft Inc | 933 | ||||
| 1008HS-181TJBC | Coilcraft Inc | RoHS : Not Compliant | 875 | |||
| 1008CS-182XJBC | Coilcraft Inc | RoHS : Not Compliant | 814 | |||
| ECS-184-S-20A-TR | ECS International Inc | RoHS : Compliant | 524 | |||
| 1812LS-183XJBC | Coilcraft Inc | RoHS : Not Compliant | 500 | |||
| DS1818R-5+ | Maxim Integrated Products | 143 | ||||
| ATC600S180GT250 | American Technical Ceramics Corp | 82 | ||||
| 0603LS-181XJLC | Coilcraft Inc | RoHS : Compliant | 60 | |||
| LP3873ES-1.8/NOPB | National Semiconductor Corporation | RoHS : Compliant | 49 | |||
| NAS186DD3C6.B | 40 | |||||
DS1818R-5-U+ | Maxim Integrated Products | RoHS : Compliant | 13 | |||
| DS18S20Z | Dallas Semiconductor | RoHS : Not Compliant | 8 | |||
 PEI Genesis | 85333KS1831PNL | SOURIAU-SUNBANK |
| 24 | ||
| 85337RS1814PN | SOURIAU-SUNBANK |
| 0 | |||
| AE83398S18316 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| 8D519S18PD | SOURIAU-SUNBANK | RoHS : Unknown |
| 0 | ||
| 8D719S18PB251 | SOURIAU-SUNBANK |
| 0 | |||
| M83723/85S18319 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/97S18318 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/98S18146 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M85049/109S18TZ08-6D | Amphenol PCD |
| 0 | |||
| M85049/112S18KZ10-6D | Amphenol PCD |
| 0 | |||
| M85049/112S18TN06-6D | Amphenol PCD |
| 0 | |||
| M85049/112S18TW07-6D | Amphenol PCD |
| 0 | |||
| M85049/112S18TW10-6 | Amphenol PCD |
| 0 | |||
| M85049/114S18KN09-6 | Amphenol PCD |
| 0 | |||
| M85049/114S18TZ08-6 | Amphenol PCD |
| 0 | |||
 Powell Electronics | MTLW-104-05-G-S-186 | Samtec Inc | .100" Low Profile Variable Post Height T |
| 1,213 | |
| MTSW-106-07-L-S-180 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 876 | ||
| MTMM-104-04-T-S-185 | Samtec Inc | Connector Header RoHS : Compliant |
| 801 | ||
| MTSW-110-07-S-S-180 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 586 | ||
| MTLW-106-05-T-S-185 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 574 | ||
| MTLW-114-05-T-S-180 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 201 | ||
| MTMM-122-05-S-S-185 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 150 | ||
| MS3456KS18-4S | Conesys | Straight Plug |
| 144 | ||
| M85049/112S18TW07-6D | Glenair Inc | ACCESSORIES - BACKSHELL RoHS : Not Compliant |
| 26 | ||
| M85049/109S18TZ08-6D | Glenair Inc | ACCESSORIES - SHRINK BOOT ADAPTERS RoHS : Compliant |
| 19 | ||
| M85049/112S18KZ10-6D | Glenair Inc | ACCESSORIES - SHRINK BOOT ADAPTERS |
| 18 | ||
| M85049/112S18TN06-6D | Glenair Inc | ACCESSORIES - BACKSHELL |
| 18 | ||
| M85049/114S18KN09-6 | Glenair Inc | ACCESSORIES - BACKSHELL RoHS : Compliant |
| 18 | ||
| 85333KS1831PN | SOURIAU-SUNBANK | 853 31C 31#20 PIN PLUG |
| 16 | ||
| 85333RS1831SN | SOURIAU-SUNBANK | 853 31C 31#20 SKT PLUG |
| 15 | ||
 PUI | CBW57-HS-18A | 122 | ||||
| 0103-1P07S18TSAA01 | 5 | |||||
 Richardson RFPD | CCS-18S18O-T | Teledyne Relays | RF Switch SP8T 0MHz to 8GHz 60dB RoHS : Not Compliant | 0 | ||
| CS-18S18C-T | Teledyne Relays | RF Switch SP8T 0MHz to 8GHz 60dB RoHS : Not Compliant | 0 | |||
| CCS-18S18C-T | Teledyne Relays | RF Coaxial Switch RoHS : Not Compliant | 0 | |||
| THAS183M010AD1C | Knowles CDE | Aluminum Electrolytic Capacitor RoHS : Compliant |
| 0 | ||
| 600S180FW250T | Kyocera AVX Components | Cap Ceramic 18pF 250V C0G 1% Pad SMD 0603 125C Ult RoHS : Not Compliant | 0 | |||
| EKMS181VSN222MR50S | United Chemi-Con Inc | Cap Aluminum Lytic 2200uF 180V 20% (30 X 50mm) Sna RoHS : Compliant | 0 | |||
| CMZFW24S1.8-8000 | Wall Industries Inc | DCTODC CONVERTR MOD | 0 | |||
| AS183-92LF | Skyworks Solutions Inc | RF Switch SPDT 0.3MHz to 2.5GHz 11dB 6-Pin SC-88 RoHS : Compliant |
| 0 | ||
| ELXS181VSN152MA30S | United Chemi-Con Inc | Cap Aluminum Lytic 1500uF 180V 20% (35 X 30mm) Sna RoHS : Compliant | 0 | |||
| ELXS181VSN182MA35S | United Chemi-Con Inc | Cap Aluminum Lytic 1800uF 180V 20% (35 X 35mm) Sna RoHS : Compliant | 0 | |||
| 600S180JT250T\\4K | Kyocera AVX Components | Multilayer Ceramic Chip RF and Microwave Capacitor RoHS : Compliant | 0 | |||
| EKMS181VSN122MR35S | United Chemi-Con Inc | Cap Aluminum Lytic 1200uF 180V 20% (30 X 35mm) Sna RoHS : Compliant | 0 | |||
| ELXS181VSN222MR50S | United Chemi-Con Inc | Cap Aluminum Lytic 2200uF 180V 20% (30 X 50mm) Sna RoHS : Compliant | 0 | |||
406C35S18M43200 | CTS Corporation | Crystal 18.432MHz ±30ppm (Tol) ±50ppm (Stability) RoHS : Compliant |
| 0 | ||
| CMMD24S1.8-6000 | Wall Industries Inc | DCTODC CONVERTR MOD | 0 | |||
 Rutronik | LL4148-GS18 | Vishay Intertechnologies | SI-DIODE 0,150A 100V MINIMELF RoHS : Compliant |
| 260,000 | |
| IS181GB | Isocom Components | COUPLER SMD-4 100-600% 5mA 5V RoHS : Compliant |
| 67,000 | ||
| ES07D-GS18 | Vishay Intertechnologies | ULTRAFAST DIODE 1,2A 200V SMF RoHS : Compliant |
| 50,000 | ||
| S07J-GS18 | Vishay Intertechnologies | SI-DIODE 0,7A 600V SMF DO219AB RoHS : Compliant |
| 40,000 | ||
| S07M-GS18 | Vishay Intertechnologies | SI-DIODE 0,7A 1000V SMF RoHS : Compliant |
| 20,000 | ||
| BCAP0360P270S18 | Maxwell Technologies | BCAP 360F 2,7V -0+20% 36x64 RoHS : Compliant |
| 13,200 | ||
| ZMY62-GS18 | Vishay Intertechnologies | Z-DIODE 1,0W 62V 5% MELF RoHS : Compliant |
| 10,000 | ||
| ZMY51-GS18 | Vishay Intertechnologies | Z-DIODE 1,0W 51V 5% MELF RoHS : Compliant |
| 10,000 | ||
| ZM4742A-GS18 | Vishay Intertechnologies | Z-DIODE 1,0W 12V 5% MELF RoHS : Compliant |
| 10,000 | ||
| PTS181260V014 | Eaton Electronics | 140mA resettable PTC 60V 1812 RoHS : Compliant |
| 8,000 | ||
| LUDZS18BT1G | LRC Leshan Radio Co Ltd | DIODE 0,2W 18,35V SOD323 RoHS : Compliant |
| 6,000 | ||
| PTS181216V050 | Eaton Electronics | 0.5A resettable PTC 16V 1812 RoHS : Compliant |
| 6,000 | ||
A759MS186M2CAAE090 | KEMET Corporation | A759 18 160 20% 10x12/5 RoHS : Compliant |
| 4,750 | ||
| RLS-186 | RECOM Power GmbH | Line Inductor for Recom DC/DC RoHS : Compliant |
| 100 | ||
| IS181C | Isocom Components | COUPLER SMD-4 50 -600% 5mA 5V RoHS : Compliant |
| 10 | ||
 Chip 1 Exchange | 0603CS-18NXJLW | Coilcraft Inc | INSTOCK RoHS : Compliant | 12,400 | ||
| VLMK3102-GS18 | INSTOCK | 12,120 | ||||
| S247Z-GS18 | Vishay Intertechnologies | INSTOCK | 11,700 | |||
| S247Z-GS18 | Vishay Intertechnologies | INSTOCK | 11,700 | |||
| ZMY36-GS18 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 10,000 | |||
| S1803C-60.000 | INSTOCK | 7,917 | ||||
| IS180 | Isocom Components | INSTOCK RoHS : Unknown | 5,785 | |||
| ZMY36-GS18 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 5,000 | |||
| DS18B20U+T&R | Maxim Integrated Products | INSTOCK RoHS : Compliant | 3,896 | |||
| PS186HDMQFN56GTR2-A1 | PARAT | INSTOCK | 3,100 | |||
| S187-D | STMicroelectronics | INSTOCK | 1,992 | |||
| 1008HS-18IT JBC | INSTOCK | 1,600 | ||||
| 1008HS-181TJBC | INSTOCK | 1,431 | ||||
| 1008LS-182XKBC | INSTOCK | 1,275 | ||||
| RZAKS185 | INSTOCK | 14 | ||||
 Avnet Abacus | LQG15HS18NJ02D | Murata Manufacturing Co Ltd | Multilayer Inductor 18 nH 036 ohm 22 GHz 300 mA 0402 1005 Metric LQG15HS02 Series (Alt: LQG15HS18NJ02D) RoHS : Compliant | 40,000 | ||
| MMZ1005S182ET000 | TDK Corporation | Ferrite Bead 0402 1005 Metric 18 kohm 200 mA MMZE Series 15 ohm 25 (Alt: MMZ1005S182ET000) RoHS : Compliant | 40,000 | |||
| MMZ1005S182ETD25 | TDK Corporation | MMZ1005S182ETD25 (Alt: MMZ1005S182ETD25) RoHS : Compliant | 10,000 | |||
PTS181230V020 | Eaton Corporation | Resettable Fuse PPTC 1812 4532 Metric PolyTron PTS1812 30 VDC 200 mA 400 mA 002 s - Tape and Reel (Alt: PTS181230V020) RoHS : Compliant | 8,000 | |||
| PTS181216V110 | Eaton Corporation | Resettable Fuse PPTC 1812 4532 Metric PolyTron PTS1812 16 VDC 11 A 22 A 05 s - Tape and Reel (Alt: PTS181216V110) RoHS : Compliant | 2,000 | |||
| ATBS-PS-1805 | Amphenol Corporation | Backshell for T1618PSX and AT1615PSX Series 1518 Position HeavyDuty Connectors 18 Shell Size ST Thermoplastic (Alt: ATBS-PS-1805) RoHS : Compliant | 1,050 | |||
ECM140US18 | XP Power | POWER SUPPLY 140WATT OPEN FRAME (Alt: ECM140US18) RoHS : Compliant | 10 | |||
| VS1852500000G | Amphenol Corporation | (Alt: VS1852500000G) RoHS : Compliant | 0 | |||
| CAS18C102MAGGC | KEMET Corporation | Ceramic Suppression Capacitor 1000 pF 20 X2 250 VAC 1812 4532 Metric Surface Mount (Alt: CAS18C102MAGGC) RoHS : Compliant | 0 | |||
| CAS18C121JAGGC | KEMET Corporation | Ceramic Suppression Capacitor 120 pF 5 X2 250 VAC 1812 4532 Metric Surface Mount 35 mm (Alt: CAS18C121JAGGC) RoHS : Compliant | 0 | |||
| CAS18C150GAGFC | KEMET Corporation | Ceramic Suppression Capacitor 15 pF 2 X1 Y2 250 VAC 250 VAC 1812 4532 Metric (Alt: CAS18C150GAGFC) RoHS : Compliant | 0 | |||
| CAS18C221MAGGC | KEMET Corporation | Ceramic Suppression Capacitor 220 pF 20 X2 250 VAC 1812 4532 Metric Surface Mount 35 mm (Alt: CAS18C221MAGGC) RoHS : Compliant | 0 | |||
| NPIS43LS180MTRF | NIC Components Corp | - Tape and Reel (Alt: NPIS43LS180MTRF) RoHS : Compliant | 0 | |||
| VGAS181242U900TP | Kyocera AVX Components | (Alt: VGAS181242U900TP) RoHS : Compliant | 0 | |||
| MTSW-106-07-L-S-180 | Samtec Inc | Pin Header BoardtoBoard 1 Rows 6 Contacts Through Hole MTSW Series Unshrouded Straight (Alt: MTSW-106-07-L-S-180) RoHS : Compliant | 0 | |||
Avnet Asia | PTVS18VS1UR,115 | Nexperia | Diode TVS Single Uni-Dir 18V 400W 2-Pin SOD-123W T/R (Alt: PTVS18VS1UR,115) RoHS : Compliant |
| 9,000 | |
| EYGS182307 | Panasonic Electronic Components | Thrml Mgmt Access Thermal Interface 1000W/m.K (Alt: EYGS182307) RoHS : Compliant | 50 | |||
| TZM5232B-GS18 | Vishay Intertechnologies | (Alt: TZM5232B-GS18) RoHS : Compliant | 0 | |||
| TZMC2V7-GS18 | Vishay Intertechnologies | (Alt: TZMC2V7-GS18) RoHS : Compliant |
| 0 | ||
| AP2125KS-1.8TRG1 | Diodes Incorporated | LDO Voltage Regulator, Fixed, 2.3 to 6 V in, 300 mV Drop, 1.8 V/360 mA out, SC-70-5 (Alt: AP2125KS-1.8TRG1) RoHS : Compliant | 0 | |||
| TZMC43-GS18 | Vishay Intertechnologies | (Alt: TZMC43-GS18) RoHS : Compliant | 0 | |||
| LL4150GS18 | Vishay Intertechnologies | (Alt: LL4150GS18) RoHS : Compliant | 0 | |||
| PTVS18VP1UTP-QX | Nexperia | (Alt: PTVS18VP1UTP-QX) RoHS : Compliant | 0 | |||
PTS181260V014 | Eaton Corporation | Resettable Fuse, PPTC, 1812 (4532 Metric), PolyTron PTS1812, 60 VDC, 140 mA, 340 mA, 0.2 s (Alt: PTS181260V014) RoHS : Compliant | 0 | |||
| LL41-GS18 | Vishay Intertechnologies | (Alt: LL41-GS18) RoHS : Compliant |
| 0 | ||
| VLMKG3400-GS18 | Vishay Intertechnologies | (Alt: VLMKG3400-GS18) RoHS : Compliant | 0 | |||
| 8MS8-6FJ6K-S183 | 3M Interconnect | (Alt: 8MS8-6FJ6K-S183) RoHS : Compliant | 0 | |||
| VS18VUA1LAMTFTR | ROHM Semiconductor | (Alt: VS18VUA1LAMTFTR) RoHS : Compliant | 0 | |||
| PTS181216V110 | Eaton Corporation | Resettable Fuse, PPTC, 1812 (4532 Metric), PolyTron PTS1812, 16 VDC, 1.1 A, 2.2 A, 0.5 s (Alt: PTS181216V110) RoHS : Compliant | 0 | |||
| NCP161AFCS180T2G | onsemi | LDO Regulator, 450 mA, Ultra-High PSRR, Ultra-Low Noise 1.8V, Active Discharge. ONSSPCLDO; (Alt: NCP161AFCS180T2G) RoHS : Compliant | 0 | |||
 Avnet Silica | PTVS18VP1UP,115 | Nexperia | TVS Diode PTVS Unidirectional 18 V 292 V SOD128 2 Pins (Alt: PTVS18VP1UP,115) RoHS : Compliant | 141,000 | ||
| LD1117S18CTR | STMicroelectronics | LDO Regulator Pos 18V 13A 4Pin3Tab SOT223 TR (Alt: LD1117S18CTR) RoHS : Compliant | 117,500 | |||
| TS1871AIYLT | STMicroelectronics | OP Amp Single GP RR IO 6V 5Pin SOT23 TR (Alt: TS1871AIYLT) RoHS : Compliant | 111,000 | |||
| TS1874IPT | STMicroelectronics | OP Amp Quad GP RR IO 6V 14Pin TSSOP TR (Alt: TS1874IPT) RoHS : Compliant | 42,500 | |||
| LD1117S18TR | STMicroelectronics | Fixed LDO Voltage Regulator 15V in 11V Dropout 18V950mA out SOT2233 (Alt: LD1117S18TR) RoHS : Compliant | 42,500 | |||
| LD1117AS18TR | STMicroelectronics | LDO Regulator Pos 18V 1A 4Pin3Tab SOT223 TR (Alt: LD1117AS18TR) RoHS : Compliant | 30,000 | |||
| LDL1117S18R | STMicroelectronics | Fixed LDO Voltage Regulator 26 V to 18 V input 40 mV Dropout 18 V 12 A out SOT2234 (Alt: LDL1117S18R) RoHS : Compliant | 12,500 | |||
| TS1874AIYPT | STMicroelectronics | Operational Amplifier RRIO 4 Channels 18 MHz 06 Vs 18V to 6V TSSOP 14 Pins (Alt: TS1874AIYPT) RoHS : Compliant | 12,500 | |||
| TS1871AILT | STMicroelectronics | OP Amp Single GP RR IO 6V 5Pin SOT23 TR (Alt: TS1871AILT) RoHS : Compliant | 9,000 | |||
| TS1872IDT | STMicroelectronics | OP Amp Dual GP RR IO 6V 8Pin SO N TR (Alt: TS1872IDT) RoHS : Compliant | 7,500 | |||
| TS1871ILT | STMicroelectronics | OP Amp Single GP RR IO 6V 5Pin SOT23 TR (Alt: TS1871ILT) RoHS : Compliant | 6,000 | |||
| TS1874IYPT | STMicroelectronics | OP Amp Quad GP RR IO 6V 14Pin TSSOP TR (Alt: TS1874IYPT) RoHS : Compliant | 2,500 | |||
| TS1874AIYDT | STMicroelectronics | OP Amp Quad GP RR IO 6V 14Pin SOIC TR (Alt: TS1874AIYDT) RoHS : Compliant | 2,500 | |||
| MCP23S18-E/MJ | Microchip Technology Inc | IO Expander 16 bit I2C Serial SPI 18 V 55 V QFN 24 Pins (Alt: MCP23S18-E/MJ) RoHS : Compliant | 91 | |||
| 71V25761S183PFGI | Renesas Electronics Corporation | (Alt: 71V25761S183PFGI) RoHS : Compliant | 72 | |||
 Braemac Americas-Symmetry | AMMLPVALRS-18.4320T | Abracon Corporation |
| 0 | ||
| EC7B-24S18NS | Cincon Electronics Corporation | Isolated DC-DC Converter RoHS : Compliant |
| 0 | ||
| CFM500S180 | Cincon Electronics Corporation | AC-DC AC-DC MODULES RoHS : Compliant |
| 0 | ||
| CFM500S180-PC | Cincon Electronics Corporation | AC-DC AC-DC MODULES RoHS : Compliant |
| 0 | ||
| AMMLPAALRS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPEALRS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPVBVRS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPDBLCS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPEBLJS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPFLAVRS-18.4320T | Abracon Corporation |
| 0 | |||
ASPI-0602S-180M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0704S-181M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMMLPDBXRS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPFLALCS-18.4320T | Abracon Corporation |
| 0 | |||
| 770-RPS1831-000G | DFI Inc | RPS183-H610EDB, 2 DDR5, Rear I/O (2 DP*++, 2 LAN, 2 USB 3.2 Gen2, 1 USB Type C), Internal I/O (1 M.2 M/B/E Key, 1 eDP*, 1 HDMI*, 2 USB 3.2 Gen1, 1 USB 2.0 Type A), w/TPM, DC19~24V, -5 to 65 C |
| 0 | ||
 Chip-Germany GmbH | ABLS-18.432MHZ-B2-T | Abracon Corporation | RoHS : Compliant | 49 | ||
| WS18-3D460 | SICK AG | 1 | ||||
 Component Electronics, Inc | RMC1/16S-1.82K-1%-R | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 10,000 | |
| 1008CS-180XJBC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant | 3,800 | |||
| DS1818R-10+-T/R | Dallas Semiconductor | IN STOCK SHIP TODAY |
| 3,000 | ||
| 1008LS-182XKBC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,400 | ||
| DS1834AS | Dallas Semiconductor | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 106 | ||
| AME8815BECS180 | AME Inc | IN STOCK SHIP TODAY | 100 | |||
| DS1813R-5/TR | Dallas Semiconductor | IN STOCK SHIP TODAY |
| 100 | ||
| TTCE-RS181 | IN STOCK SHIP TODAY | 98 | ||||
| 892NAS-180M=P3 | TOKO Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 27 | ||
| TPS18XC-E1-20.000MHZ | Telcona AG | IN STOCK SHIP TODAY | 25 | |||
| MS18235-1BT | Dialight | IN STOCK SHIP TODAY |
| 20 | ||
| ASCS-18 | IN STOCK SHIP TODAY | 19 | ||||
| DS1868S-010 | Dallas Semiconductor | IN STOCK SHIP TODAY RoHS : Not Compliant | 6 | |||
| BM90-220S18-00 | Enargy Power Corporation | IN STOCK SHIP TODAY |
| 4 | ||
| FRS-1-8/10 | Eaton Bussmann | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | NAS1801-04-5 | Military Specifications |
| 12,822 | ||
| NAS1802-3-30 | Military Specifications |
| 20 | |||
| S-180-5 | Shercon Inc |
| 1 | |||
| NAS1831AC3B11 | RAF Electronic Hardware | 0 | ||||
| D4-A5T14DSS18PSNA | Southco | D4-A5T14DSS18PSNA | 0 | |||
| CA-1032S-180 | SHEREX FASTENING SO | 10-32 | 0 | |||
| DMS1875-1A | Essentra Components | 1.875IN ID 1.00IN LENGTHSOFT R | 0 | |||
| RS-1809-0437 | Heyco | RS 0187 OD X091 ID X437 LG NAT | 0 | |||
| RS-1811-0687 | Heyco | RS 0187 OD X115 ID X687 LG NAT | 0 | |||
| RS-1811-0812 | Heyco | RS 0187 OD X115 ID X812 LG NAT | 0 | |||
| NAS1829C4E05 | RAF Electronic Hardware | STEEL 303 STANDOFFS | 0 | |||
| NAS1831C3B06 | RAF Electronic Hardware | 0 | ||||
| SQLEDS1-8-26 | Essentra Components | Led SpacerT-1Black1/2 inSpc Led Spacer T-1 Black | 0 | |||
| OS-187 | Essentra Components | SLEEVE INSULATOR,NAT,.187 IN S | 0 | |||
| TOBS-18-01A-RT | Essentra Components | Cable TieAdh MntBlk4.61 in Lg18Lb | 0 | |||
 EBV Elektronik | BAV103-GS18 | Vishay Intertechnologies | SWITCHING DIODE GENPURP SOD80 MINIMELF (Alt: BAV103-GS18) RoHS : Compliant | 5,970,000 | ||
| LL4148-GS18 | Vishay Intertechnologies | (Alt: LL4148-GS18) RoHS : Compliant | 1,940,000 | |||
| TZMC47-GS18 | Vishay Intertechnologies | (Alt: TZMC47-GS18) RoHS : Compliant | 840,000 | |||
| TZMC39-GS18 | Vishay Intertechnologies | (Alt: TZMC39-GS18) RoHS : Compliant | 230,000 | |||
| ZMY6V8-GS18 | Vishay Intertechnologies | (Alt: ZMY6V8-GS18) RoHS : Compliant | 140,000 | |||
| VLMV3100-GS18 | Vishay Intertechnologies | SMDLED RED GREEN PLCC3e3 (Alt: VLMV3100-GS18) RoHS : Compliant | 48,000 | |||
| TZMC12-GS18 | Vishay Intertechnologies | (Alt: TZMC12-GS18) RoHS : Compliant | 40,000 | |||
| TZMB5V6-GS18 | Vishay Intertechnologies | (Alt: TZMB5V6-GS18) RoHS : Compliant | 30,000 | |||
RS07K-GS18 | Vishay Intertechnologies | (Alt: RS07K-GS18) RoHS : Compliant | 20,000 | |||
| LS4150GS18 | Vishay Intertechnologies | (Alt: LS4150GS18) RoHS : Compliant | 20,000 | |||
| LL4448-GS18 | Vishay Intertechnologies | (Alt: LL4448-GS18) RoHS : Compliant | 20,000 | |||
| BZT55B6V2-GS18 | Vishay Intertechnologies | ZENER DIODE SOD80 QUADROMELF (Alt: BZT55B6V2-GS18) RoHS : Compliant | 20,000 | |||
| TS1852IST | STMicroelectronics | OP Amp Dual GP RR IO 6V 8Pin MSOP TR (Alt: TS1852IST) RoHS : Compliant | 8,000 | |||
| VS-18TQ045-M3 | Vishay Intertechnologies | (Alt: VS-18TQ045-M3) RoHS : Compliant | 4,500 | |||
| 1SS184(TE85L,F) | Toshiba America Electronic Components | Diode Switching 85V 03A 3Pin SMini TR (Alt: 1SS184(TE85L,F)) RoHS : Compliant | 3,000 | |||
 FDH Electronics | MS18029-1S18 | R&B Electronics | Wire and Cable | 2 | ||
| MS18029-1S-18 | R&B Electronics | Wire and Cable | 0 | |||
| M85049/109S18TZ08-6D | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| M85049/112S18KZ10-6D | Glenair Inc | Connector | 0 | |||
| M85049/112S18TN06-6D | Glenair Inc | Connector | 0 | |||
| M85049/112S18TN06-6D | Amphenol PCD | Backshells & Ac |
| 0 | ||
| M85049/112S18TW07-6D | Amphenol PCD | Backshells & Ac |
| 0 | ||
| M85049/112S18TW07-6D | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| M85049/112S18TW10-6 | Glenair Inc | Connector | 0 | |||
| M85049/112S18TW10-6 | Amphenol PCD | Backshells & Ac |
| 0 | ||
| M85049/114S18KN09-6 | Amphenol PCD | Backshells & Ac |
| 0 | ||
| M85049/114S18KN09-6 | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| M85049/144S18N12-4 | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/146S18N08 | Amphenol PCD | Backshells & Ac | 0 | |||
| MS18029-1S-16 | R&B Electronics | Wire and Cable | 0 | |||
 Flip Electronics | NCP161AFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant | 200,000 | ||
| Z8S18020VSG1960 | Littelfuse Inc | Stock, Ship Today | 25,586 | |||
| FAN2558S18X | onsemi | Stock, Ship Today RoHS : Compliant |
| 7,702 | ||
| Z8S18020VEG00TR | Littelfuse Inc | Stock, Ship Today | 4,550 | |||
NCP5663DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,400 | ||
| Z8S18010VEG | Littelfuse Inc | Stock, Ship Today | 2,375 | |||
| Z8S18010FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 2,126 | |||
| Z8S18010VSG | Littelfuse Inc | Stock, Ship Today | 1,675 | |||
| NCP59151DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 800 | ||
| NCP59301DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 700 | ||
| Z8S18010FEG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 305 | |||
| NCP5663DS18G | onsemi | Stock, Ship Today RoHS : Compliant |
| 297 | ||
| EP2S180F1020C3 | Altera Corporation | Stock RoHS : Not Compliant | 10 | |||
| ICS80HCPS1848CHMI | Integrated Device Technology Inc | Stock | 4 | |||
| 80HCPS1848CHMI | Integrated Device Technology Inc | Stock, Ship Today RoHS : Not Compliant |
| 4 | ||
 Maritex | SIL RNL A TYPE, 9PINS 1/8W 5%, 8X 330K | Royal Electronic Factory (Thailand) Co Ltd | Resistor network; RA8x330K; 1/8W; 5% |
| 4,010 | |
| FPV160808S180PKT | Fenghua (HK) Electronics Ltd | Varistor SMD; 0603; 18VDC; 40pF RoHS : Compliant |
| 3,880 | ||
| WS18P6SMB | Cyg Wayon Circuit Protection Co Ltd | Transil Diode (TVS); 600W; 18V; 20.5A; unidirectional; -65+150 deg.C; SMD; DO214AA(SMB) RoHS : Compliant |
| 3,765 | ||
| FPV201209S180PKT | Fenghua (HK) Electronics Ltd | Varistor SMD; 0805; 18VDC; 45pF RoHS : Compliant |
| 3,000 | ||
| SIL RNL A TYPE, 9PINS 1/8W 5%, 8X 22E | Royal Electronic Factory (Thailand) Co Ltd | Resistor network; RA8x470K; 1/8W; 5% |
| 2,389 | ||
| MPZ1608S181ATDH5 | TDK Corporation | Ferrite Beads; MPZ1608S181ATDH5; TDK; 600 �m; 0603; 180 ?; 50 m? RoHS : Compliant |
| 2,332 | ||
| DCPS1831C | CONNTHERM | DC plug; female; inner diameter 3.1mm; outer diameter 6.5mm |
| 1,435 | ||
| FPS-187 | JST Manufacturing | Terminal Housings; FPS-187; JST; 1; Grey; Quick Connect RoHS : Compliant |
| 1,094 | ||
| DCPS1825-CT | CONNTHERM | DC plug; female; inner diameter 2.5mm; outer diameter 5.5mm |
| 719 | ||
| SIL RNL A TYPE, 9PINS 1/8W 5%, 8X 220K | Royal Electronic Factory (Thailand) Co Ltd | Resistor network; RA8x220K; 1/8W; 5% |
| 663 | ||
SN75ALS181NSR | Texas Instruments | Other Interface ICs; SN75ALS181NSR; TEXAS INSTRUMENTS; 14; 5.25 V; 4.75 V; SOP RoHS : Compliant |
| 490 | ||
| QOS1.8432MHZ-TTL/CMOS-5V-30PPM-DIL8-ROHS | Fronter Electronics Co Ltd | Quartz oscillator; 1.8432 MHz; 30ppm |
| 414 | ||
| SIL RNL A TYPE, 9PINS 1/8W 5%, 8X 330E | Royal Electronic Factory (Thailand) Co Ltd | Resistor network; RA8x330R; 1/8W; 5% |
| 46 | ||
| DCPS1821-CT | CONNTHERM | DC plug; female; inner diameter 2.1mm; outer diameter 5.5mm |
| 8 | ||
| IES-180B | Oring Industrial Networking Corp | Unmanaged Ethernet switch with 8x10/100Base-T(X); operating temperature -40+70 deg.C; DIN rail mountable |
| 3 | ||
 Master Electronics | CCS-18S180-T | Teledyne Coax Switches | RF Switch Commercial DC-12GHz SMA Failsafe SP8T TTL RoHS : Compliant |
| 2 | |
| IDSS-18-S-18.00 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-124-07-L-S-185 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-129-07-F-S-180 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-132-07-L-S-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-137-07-L-S-185 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-137-24-T-S-180-RA | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-140-24-T-S-180-RA | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-145-07-L-S-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-203-24-L-S-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| NAS1829A3C04 | RAF Electronic Hardware | RoHS : Compliant |
| 0 | ||
| NAS1829C6J20 | RAF Electronic Hardware | RoHS : Compliant |
| 0 | ||
| NAS1831A4C64 | RAF Electronic Hardware | RoHS : Compliant |
| 0 | ||
| NAS1831AC4C10 | RAF Electronic Hardware | RoHS : Compliant |
| 0 | ||
| TW-46-11-F-S-185-090 | Samtec Inc | Conn Board Stacker HDR 46 POS 2mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
 Neutron USA | S18AW3D | Banner Engineering Corp | Photoelectric, Diffuse, 18mm Plastic, In: 20-250 VAC, Out: L Oper, 4" Range, 2m |
| 50 | |
| S18LGRBN | Banner Engineering Corp | Indicator, S18 Ez-Light 18 mm, Grn Rd Blu, 10-30Vdc, NPN Input, 4 Wire 2 m Cable, 31340 |
| 50 | ||
| S18LGRYPQ | Banner Engineering Corp | Panel Mount Indicator LED 18mm Green Red Yel QC Tabs EZ-Light S18 Series |
| 50 | ||
| ECM40US18 | XP Power | Power Supply, AC-DC, Open Frame, 40W, 18V2.2A, 90-264V In, ECM Series RoHS : Compliant |
| 50 | ||
| S18DLGRYPQ | Banner Engineering Corp | Panel Mount Indicator LED 18mm Green Red Yel QC EZ-Light S18L Series |
| 46 | ||
| VS18S511DF213A | Norgren | Norgren VS18S511DF213A Solenoid Valve, Double Acting, 24Vdc, 5/2, VS18 Series |
| 23 | ||
ATS-18A-05-C2-R0 | Advanced Thermal Solutions Inc | Heat Sinks pushPIN Heat Sink Assembly, Fine-Pitch, X-Cut, 4-Corner Hole, T766, 40x40x25mm |
| 18 | ||
| DS18VP6LP | Banner Engineering Corp | Cable Pnp Pol Retroreflective |
| 16 | ||
| S18AW3LPQ1 | Banner Engineering Corp | Photoelectric Sensor, Polarized Retro, M18 Barrel, R: 2m, 20-250VAC, SPST SSAC LO, 4 Pin QDC, 33451 |
| 3 | ||
| S18LGRYPQP | Banner Engineering Corp | LED Panel Mount Indicators S18 EZ-LIGHT - 18 mm - IP67; Three Color: Green Red Yellow; 10-30 V dc PNP Input; 6 in 4-pin M12 Pigtail QD |
| 3 | ||
| S18RW3FF50Q1 | Banner Engineering Corp | Photoelectric Sensor, Fixed Field, 50mm, 20-250VAC, SSAC, QD, S18 |
| 1 | ||
| GCS180PS12-R | XP Power | Switching Power Supplies RoHS : Compliant |
| 1 | ||
| APQS18-100H | Banner Engineering Corp | Sensor Hardware & Accessories |
| 1 | ||
| S18DLGRYPQP | Banner Engineering Corp | Indicator, 10-30Vdc PNP Input, Grn Red Yel, 6" QDM12, 25826 |
| 1 | ||
| S18C2.0 | Banner Engineering Corp | Remote Ultrasonic Sensor, TOF, f: 400kHz, R: 50-250mm, In/Out: dep on the controller, 2m cable, 56827 |
| 0 | ||
 Pasternack Enterprises US | PE3480/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC Twinax, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: BNC Twinax, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG108A/U, RF Cable Type: RG108, RF Cable Impedance: 78 Ohm, Length, Max: 18 inches. BNC Twinax Plug to BNC Twinax Plug Cable 18 Inch Length Using 78 Ohm RG108 Coax with HeatShrink., Radio frequency assembly BNC twinax plug to BNC twinax plug cable 18 inch length using 78 Ohm RG108 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC twinax plug to BNC twinax plug cable 18 inch length using 78 Ohm RG108 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC twinax to BNC twinax cable assembly orders will ship the same business day as well. Pasternack RF twinax cable assembly is built with a BNC twinax cable connection on one end and a BNC twinax cable connection on the other. Our BNC twinax to BNC twinax cable assembly has a plug gender on end 1 and a plug on end 2. PE3480/HS-18 can also be known as a BNC twinax male to BNC twinax male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (LD) dielectric type. Our PE3480/HS-18 RF cable has a PVC jacket of 0.235-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has an in-series connection. Our BNC Twinax plug to BNC Twinax plug cable has a maximum VSWR of 1.4:1. BNC twinax male to BNC twinax male cable assembly PE3480/HS-18 is built with RG108 which is a flexible twinax type. The Pasternack flexible BNC Twinax cable assembly is manufactured with BNC twinax to BNC twinax cable connectors, has a 78 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC twinax male to BNC twinax male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC twinax to BNC twinax cable assembly for quick shipment worldwide. Variations of BNC twinax cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC Twinax to BNC Twinax RF cable assembly as per your requirements. |
| 1,097 | |
| PE39437/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Cable 18 Inch Length Using PE-SR402FLJ Coax with HeatShrink., Radio frequency assembly SMA male to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE39437/HS-18 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE39437/HS-18 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE39437/HS-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 463 | ||
| PE39436/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. MMCX Plug Right Angle to SMA Female Bulkhead Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly MMCX plug right angle to SMA female bulkhead cable 18 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to SMA female bulkhead cable 18 inch length using PE-SR405FLJ coax with heatshrink, MMCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and SMA bulkhead cable connection on the other. Our right angle MMCX to SMA cable assemblies have a plug gender on end 1 and female on end 2. PE39436/HS-18 can also be known as a right angle MMCX male to SMA jack cable assembly and will be shipped same-day as it is purchased. MMCX male to SMA jack cable assembly PE39436/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MMCX cable assembly is manufactured with right angle MMCX to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency MMCX right angle plug to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39436/HS-18 can also be used in the other direction and will be SMA female bulkhead to right angle MMCX plug cable assembly if the opposite connectivity is required. MMCX right angle male to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMA cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to SMA female bulkhead cable 18 inch length using PE-SR405FLJ coax with heatshrink. |
| 445 | ||
| PE3C10780/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-FR, RF Cable Type: LMR-600-FR, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. Fire Rated N Male to N Male Right Angle Low Loss Cable 180 Inch Length Using LMR-600-FR Coax with Times Microwave Components with HeatShrink., Pasternack’s PE3C10780/HS-180 low loss type N male to right angle type N male RF cable assembly using LMR-600-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The type N male to type N male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C10780/HS-180 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10780/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. This PE3C10780/HS-180 type N plug to type N plug cable assembly is built with LMR-600-FR, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 180-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C10780/HS-180 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. This low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 160 | ||
| PE3W19360/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Cable 18 Inch Length Using TCOM-400 Coax with HeatShrink., Pasternack’s PE3W19360/HS-18 SMA male to SMA male RF cable assembly using TCOM-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W19360/HS-18 can also be known as an SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.705-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W19360/HS-18 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W19360/HS-18 SMA plug to SMA plug cable assembly is built with TCOM-400, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 158 | ||
| PE3W20796/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. TNC Male to SMA Male Cable 18 Inch Length Using TCOM-400 Coax with HeatShrink., Pasternack’s PE3W20796/HS-18 TNC male to SMA male RF cable assembly using TCOM-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and an SMA cable connection on the other. Our TNC to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W20796/HS-18 can also be known as a TNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.705-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W20796/HS-18 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Our TNC male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W20796/HS-18 TNC plug to SMA plug cable assembly is built with TCOM-400, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3W20796/HS-18 can also be used in the other direction and will be an SMA plug to TNC plug cable assembly if the opposite connectivity is required. This TNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA RF cable assembly as per your requirements. |
| 158 | ||
| PE3W16752/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Cable 18 Inch Length Using TCOM-240 Coax with HeatShrink., Pasternack’s PE3W16752/HS-18 SMA male to SMA male RF cable assembly using TCOM-240 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W16752/HS-18 can also be known as an SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.312-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16752/HS-18 RF cable has a PE jacket of 0.24-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W16752/HS-18 SMA plug to SMA plug cable assembly is built with TCOM-240, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 14 | ||
| PE3465LF/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC Twinax, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: BNC Twinax, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG108A/U, RF Cable Type: RG108, RF Cable Impedance: 78 Ohm, Length, Max: 18 inches. BNC Twinax Jack to BNC Twinax Jack Cable 18 Inch Length Using 78 Ohm RG108 Coax with HeatShrink, LF Solder., Radio frequency assembly BNC twinax jack to BNC twinax jack cable 18 inch length using 78 Ohm RG108 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC twinax jack to BNC twinax jack cable 18 inch length using 78 Ohm RG108 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC twinax to BNC twinax cable assembly orders will ship the same business day as well. Pasternack RF twinax cable assembly is built with a BNC twinax cable connection on one end and a BNC twinax cable connection on the other. Our BNC twinax to BNC twinax cable assembly has a jack gender on end 1 and a jack on end 2. PE3465LF/HS-18 can also be known as a BNC twinax female to BNC twinax female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. Our PE3465LF/HS-18 RF cable has a PVC jacket of 0.235-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has an in-series connection. BNC twinax female to BNC twinax female cable assembly PE3465LF/HS-18 is built with RG108 which is a flexible twinax type. The Pasternack flexible BNC Twinax cable assembly is manufactured with BNC twinax to BNC twinax cable connectors, has a 78 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC twinax female to BNC twinax female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC twinax to BNC twinax cable assembly for quick shipment worldwide. Variations of BNC twinax cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC Twinax to BNC Twinax RF cable assembly as per your requirements. |
| 6 | ||
| PE3W17134/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. N Male to N Male Cable 18 Inch Length Using TCOM-600 Coax with HeatShrink., Pasternack’s PE3W17134/HS-18 type N male to type N male RF cable assembly using TCOM-600 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N male to type N male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17134/HS-18 can also be known as a type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17134/HS-18 RF cable has a PE jacket of 0.59-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. This PE3W17134/HS-18 type N plug to type N plug cable assembly is built with TCOM-600, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. This type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W17373/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. N Male to N Male Cable 18 Inch Length Using TCOM-600 Coax with HeatShrink., Pasternack’s PE3W17373/HS-18 type N male to type N male RF cable assembly using TCOM-600 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N male to type N male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17373/HS-18 can also be known as a type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.81-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17373/HS-18 RF cable has a PE jacket of 0.59-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. This PE3W17373/HS-18 type N plug to type N plug cable assembly is built with TCOM-600, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. This type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W05905/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMP Female Right Angle to SMP Female Right Angle Cable 18 Inch Length Using Tinned RG405 Coax with HeatShrink., Pasternack’s PE3W05905/HS-18 right angle SMP female to right angle SMP female RF cable assembly using RG405 tinned coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMP cable connection on one end and a right angle SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3W05905/HS-18 can also be known as a right angle SMP jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. Our right angle SMP female to right angle SMP female cable has a maximum VSWR of 1.4:1. This PE3W05905/HS-18 SMP jack to SMP jack cable assembly is built with RG405 tinned, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. This SMP right angle jack to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP RF cable assembly as per your requirements. |
| 0 | ||
| PE33964/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Female to SMA Female Cable 18 Inch Length Using PE-SR402FL Coax with HeatShrink., Radio frequency assembly SMA female to SMA female cable 18 inch length using PE-SR402FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to SMA female cable 18 inch length using PE-SR402FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a female gender on end 1 and a female on end 2. PE33964/HS-18 can also be known as a SMA jack to SMA jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. Our SMA female to SMA female cable has a maximum VSWR of 1.4:1. SMA jack to SMA jack cable assembly PE33964/HS-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA jack to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE35110/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Female 4 Hole Flange to SMA Female 4 Hole Flange Cable 18 Inch Length Using PE-SR402FL Coax with HeatShrink., Radio frequency assembly SMA female 4 hole flange to SMA female 4 hole flange cable 18 inch length using PE-SR402FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female 4 hole flange to SMA female 4 hole flange cable 18 inch length using PE-SR402FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA 4 hole flange cable connection on one end and a SMA 4 hole flange cable connection on the other. Our SMA to SMA cable assembly has a female gender on end 1 and a female on end 2. PE35110/HS-18 can also be known as a SMA jack to SMA jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. Our 4 hole flange SMA female to 4 hole flange SMA female cable has a maximum VSWR of 1.4:1. SMA jack to SMA jack cable assembly PE35110/HS-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA jack 4 hole flange to SMA jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE39423/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Cable 18 Inch Length Using PE-SR402FL Coax with HeatShrink., Radio frequency assembly SMA male to SMA male cable 18 inch length using PE-SR402FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 18 inch length using PE-SR402FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE39423/HS-18 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE39423/HS-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE39427/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Female Bulkhead Cable 18 Inch Length Using PE-SR402FL Coax with HeatShrink., Radio frequency assembly SMA male to SMA female bulkhead cable 18 inch length using PE-SR402FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female bulkhead cable 18 inch length using PE-SR402FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA bulkhead cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE39427/HS-18 can also be known as a SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. Our SMA male to bulkhead SMA female cable has a maximum VSWR of 1.4:1. SMA plug to SMA jack cable assembly PE39427/HS-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold over nickel plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE39427/HS-18 can also be used in the other direction and will be a SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
 TE Connectivity | WHDS-18-2 | TE Connectivity | STRAIN RELIEF, HD30, 18SZ, RA Primary Product Material: Steel Automotive Connector Accessory Type: Strain Relief Operating Temperature Range: -55 – 125 °C Operating Temperature Range: -67 – 257 °F Steel Strain Relief | Automotive Connector Accessories | Part Number: WHDS-18-2 | Internal Number: WHDS-18-2 | Alias Number: ZPF000000000131686 | TE Connectivity RoHS : Compliant |
| 1,420 | |
| HSC100S18RJ | TE Connectivity | HSC100S 18R 5% Screw Terminal Resistance Value: 18 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 18 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S18RJ | Internal Number: 3-2176731-1 | TE Connectivity RoHS : Compliant |
| 25 | ||
| HSC150S18KJ | TE Connectivity | HSC150S 18K 5% Screw Terminal Resistance Value: 18K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistors: Aluminium Housed & Hsc | 18K Ω Wire Wound 5 % Power Resistor | Part Number: HSC150S18KJ | Internal Number: 6-2176732-4 | TE Connectivity RoHS : Compliant |
| 21 | ||
| HSC100S180RJ | TE Connectivity | HSC100S 180R 5% Screw Terminal Resistance Value: 180 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 180 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S180RJ | Internal Number: 4-2176731-3 | TE Connectivity RoHS : Compliant |
| 14 | ||
 Venkel Ltd. | WRFI0603-S-18NKT | VENKEL LTD | Wirewound RF Inductor;0603;18nH;�10% RoHS : Not Compliant | 8,000 | ||
| WRFI0603-S-18NJT | VENKEL LTD | Wirewound RF Inductor;0603;18nH;�5% RoHS : Not Compliant | 4,000 | |||
| WRFI0402-S-18NKT | VENKEL LTD | Wirewound RF Inductor;0402;18nH;�10% RoHS : Not Compliant | 0 | |||
| SHPI121210S-180MU | VENKEL LTD | Shielded High Power Inductor;121210;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI121245S-181MU | VENKEL LTD | Shielded High Power Inductor;121245;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| SHPI737334S-180MU | VENKEL LTD | Shielded High Power Inductor;737334;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| WRFI0805-S-18NKT | VENKEL LTD | Wirewound RF Inductor;0805;18nH;�10% RoHS : Not Compliant | 0 | |||
| SHPI121245S-180MU | VENKEL LTD | Shielded High Power Inductor;121245;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| WRFI1008-S-18NGT | VENKEL LTD | Wirewound RF Inductor;1008;18nH;�2% RoHS : Not Compliant | 0 | |||
| SHPI737345S-181MU | VENKEL LTD | Shielded High Power Inductor;737345;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| SHPI626650S-180MU | VENKEL LTD | Shielded High Power Inductor;626650;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI626630S-181MU | VENKEL LTD | Shielded High Power Inductor;626630;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| SHPI737345S-180MU | VENKEL LTD | Shielded High Power Inductor;737345;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI121260S-180MU | VENKEL LTD | Shielded High Power Inductor;121260;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| WRFI0805-S-18NJT | VENKEL LTD | Wirewound RF Inductor;0805;18nH;�5% RoHS : Not Compliant | 0 | |||
 Vyrian | TS1854AIDT | STMicroelectronics | Operational Amplifier, 4 Func, 1000uV Offset-Max, BIPolar, PDSO14 RoHS : Compliant | 12,268 | ||
| SN74AS182N-10 | Texas Instruments | Look-Ahead Carry Generator, AS Series, 4-Bit, TTL, PDIP16 | 9,093 | |||
| SN75ALS180DRG4 | Texas Instruments | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO14 RoHS : Compliant | 9,053 | |||
| SN74AS1832NP3 | Texas Instruments | OR Gate, TTL, PDIP20 RoHS : Not Compliant | 8,908 | |||
| SN74LS189N | Texas Instruments | Standard SRAM, 16X4, TTL, PDIP16 RoHS : Not Compliant | 8,842 | |||
| SN74AS181AFN | Texas Instruments | Arithmetic Logic Unit, AS Series, 4-Bit, TTL, PQCC28 RoHS : Not Compliant | 8,549 | |||
| SN54AS182J | Texas Instruments | Look-Ahead Carry Generator, AS Series, 4-Bit, TTL, CDIP16 RoHS : Not Compliant | 8,096 | |||
SNJ54S181J | Texas Instruments | Arithmetic Logic Unit, S Series, 4-Bit, True Output, TTL, CDIP24 RoHS : Not Compliant | 7,299 | |||
| SNJ54LS189J | Texas Instruments | Standard SRAM, 16X4, TTL, CDIP16 RoHS : Not Compliant | 6,476 | |||
| MT5C1005S18ADC1-20 | Micron Technology Inc | Memory IC | 5,820 | |||
| SN75ALS181N | Texas Instruments | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, TTL, PDIP14 RoHS : Compliant | 5,492 | |||
TS1854AIN | STMicroelectronics | Operational Amplifier, 4 Func, 1000uV Offset-Max, BIPolar, PDIP14 RoHS : Compliant | 5,331 | |||
| TS1872AID | STMicroelectronics | Operational Amplifier, 2 Func, 1500uV Offset-Max, BICMOS, PDSO8 RoHS : Compliant | 4,476 | |||
| MT5LC1008S18AWC1-20 | Micron Technology Inc | Memory IC | 3,930 | |||
| SN74LS189AN1 | Texas Instruments | Standard SRAM, 16X4, 80ns, TTL, PDIP16 RoHS : Not Compliant | 3,633 | |||
 Win Source Electronics | 1SS184 | Toshiba America Electronic Components | DIODE ARRAY GP 80V 100MA SC59 RoHS : Compliant |
| 210,000 | |
| ULN2803G-S18-R | United Technologies Corporation | EIGHT DARLINGTON ARRAYS |
| 61,000 | ||
TVS1800DRVR | Texas Instruments | UNIDIR PRECISION SURGE DIODE / RoHS : Compliant |
| 60,090 | ||
| DS18B20U+T&R | Maxim Integrated Products | SENSOR TEMPERATURE 1-WIRE 8UMAX RoHS : Compliant |
| 36,840 | ||
| DS1803E-100+T&R | Maxim Integrated Products | Digital Potentiometer 256POS 100k Ohm 2Pot 14-Pin TSSOP T/R RoHS : Compliant |
| 18,450 | ||
| DS1816R-10 | Maxim Integrated Products | RoHS : Not Compliant |
| 18,000 | ||
| DS1832S+T | Maxim Integrated Products |
| 14,330 | |||
| DS1825U+ | Maxim Integrated Products | SENSOR TEMPERATURE 1-WIRE 8UMAX / Temp Sensor Digital Serial (1-Wire) 8-Pin uMAX RoHS : Compliant |
| 8,076 | ||
SN65LVDS180PWR | Texas Instruments | HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS | IC DIFF LINE DVR/RCVR HS 14TSSOP RoHS : Compliant |
| 6,080 | ||
| SN75ALS180DRG4 | Texas Instruments | IC DIFF LINE DRVR/RCVR 14-SOIC RoHS : Compliant |
| 3,190 | ||
| DS1845E-010-TR | Maxim Integrated Products |
| 3,000 | |||
TMDS181IRGZR | Texas Instruments | TMDS181x 6 Gbps TMDS Retimer | IC RETIMER DVI HDMI 6GBPS 48VQFN RoHS : Compliant |
| 2,450 | ||
| AS183-92LF | Skyworks Solutions Inc | IC SW SPDT 300K-2.5GHZ SC70-6 RoHS : Compliant |
| 2,020 | ||
| MCP23S18T-E/SO | Microchip Technology Inc | IC I/O EXPANDER SPI 16B 28SOIC RoHS : Compliant |
| 1,927 | ||
| EP2S180F1020I4 | Intel Corporation | IC FPGA 742 I/O 1020FBGA RoHS : Not Compliant |
| 500 | ||
 Wuhan P&S | SM8S18AHE3_A/I | Vishay Intertechnologies | Surface Mount Transient Voltage Suppressors RoHS : Compliant |
| 18,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand