| Electronic Components Datasheet Search |
|
S26V1CJ-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | SS26T3G | onsemi | Schottky Rectifier, 60 V, 2 A, Single, DO-214AA (SMB), 2 Pins, 630 mV - Tape and Reel (Alt: SS26T3G) RoHS : Compliant |
| 67,500 | |
| SS26S-E3/61T | Vishay Intertechnologies | 2A,60V,SM SCHOTTKY RECT - Tape and Reel (Alt: SS26S-E3/61T) RoHS : Compliant |
| 23,400 | ||
| MURS260-E3/5BT | Vishay Intertechnologies | 2A, 600V, 50NS, SMB UF RECT. SMD - Tape and Reel (Alt: MURS260-E3/5BT) RoHS : Compliant |
| 12,800 | ||
| SS26HE3_A/H | Vishay Intertechnologies | Diode Schottky Barrier Rectifier 60V 2A 2-Pin DO-214AA Plastic T/R - Tape and Reel (Alt: SS26HE3_A/H) RoHS : Compliant |
| 12,000 | ||
PTVS26VS1UR,115![]() | Nexperia | TVS Diode, PTVSxS1UR Series, Unidirectional, 26 V, 42.1 V, SOD-123, 2 Pins - Tape and Reel (Alt: PTVS26VS1UR,115) RoHS : Compliant |
| 9,000 | ||
| MURS260T3G | onsemi | Power Rectifier, Ultra-Fast Recovery, 2 A, 600 V - Tape and Reel (Alt: MURS260T3G) RoHS : Compliant |
| 7,500 | ||
| 10090929-S264VLF | Amphenol Corporation | D Sub Connector, High Density, Receptacle, FCI 10090929 Series, 26 Contacts, DA, Solder - Trays (Alt: 10090929-S264VLF) RoHS : Compliant |
| 1,570 | ||
| VS-26MT120 | Vishay Intertechnologies | Diode Rectifier Bridge Single 1.2KV 25A 5-Pin Case D-63 - Boxed Product (Development Kits) (Alt: VS-26MT120) RoHS : Compliant |
| 1,263 | ||
ABLS2-6.144MHZ-D4Y-T![]() | Abracon Corporation | Crystal, Microprocessor, 6.144 MHz, SMD, 11.4mm x 4.7mm x 3.3mm, 30 ppm, 18 pF, 30 ppm, ABLS2 - Tape and Reel (Alt: ABLS2-6.144MHZ-D4Y-T) RoHS : Compliant |
| 1,000 | ||
| SM5S26AHE3_A/I | Vishay Intertechnologies | - Tape and Reel (Alt: SM5S26AHE3_A/I) RoHS : Compliant |
| 750 | ||
| B72220S2621K101 | TDK Corporation | - Bulk (Alt: B72220S2621K101) RoHS : Compliant |
| 180 | ||
| RWR81S26R7FRR36 | Vishay Intertechnologies | - Custom Tape W/Leader (Alt: RWR81S26R7FRR36) RoHS : Not Compliant |
| 100 | ||
| ATS-HP-D3L70S26W-111 | Advanced Thermal Solutions Inc | HIGH PERFORMANCE COPPER HEAT PIPE - ROUN - Trays (Alt: ATS-HP-D3L70S26W-111) RoHS : Compliant |
| 50 | ||
| ATS-HP-D6L400S26W-134 | Advanced Thermal Solutions Inc | - Trays (Alt: ATS-HP-D6L400S26W-134) RoHS : Compliant |
| 48 | ||
| DCM2322E72S26A0T60 | Vicor Power | DCM2322T72S26A0T60 Isolated DC to DC Converter Evaluation Board - Boxed Product (Development Kits) (Alt: DCM2322E72S26A0T60) RoHS : Not Compliant |
| 10 | ||
![]() Newark | MPZ1608S260ATDH5 | TDK Corporation | Ferrite Chip Bead, 0603, 0.007Ohm, 6A; |Tdk MPZ1608S260ATDH5 RoHS : Compliant |
| 14,310 | |
| MPZ1608S260ATDH5 | TDK Corporation | Ferrite Chip Bead, 0603, 0.007Ohm, 6A; |Tdk MPZ1608S260ATDH5 RoHS : Compliant |
| 14,310 | ||
| MTSW-102-22-T-S-265 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 2Pos; |Samtec, Inc. MTSW-102-22-T-S-265 RoHS : Compliant |
| 2,793 | ||
| MTMM-102-08-T-S-264 | Samtec Inc | Pin Header, Mtmm-102-08-T-S-264; |Samtec, Inc. MTMM-102-08-T-S-264 RoHS : Compliant |
| 2,150 | ||
| MTSW-108-08-S-S-260 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 8Pos; |Samtec, Inc. MTSW-108-08-S-S-260 RoHS : Compliant |
| 1,041 | ||
| MTSW-116-08-S-S-260 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 16Pos; |Samtec, Inc. MTSW-116-08-S-S-260 RoHS : Compliant |
| 533 | ||
| TW-06-09-SM-S-267-120 | Samtec Inc | Conn Stack Brd, 2Mm, 6Pos, Hdr; |Samtec, Inc. TW-06-09-SM-S-267-120 RoHS : Compliant |
| 521 | ||
| MTMM-112-07-L-S-260 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 12Pos; |Samtec, Inc. MTMM-112-07-L-S-260 RoHS : Compliant |
| 435 | ||
| ZW-01-07-T-S-260-090 | Samtec Inc | Stacking Board Connector, Zw Series; |Samtec, Inc. ZW-01-07-T-S-260-090 RoHS : Compliant |
| 434 | ||
| ZW-03-10-G-S-260-280 | Samtec Inc | Conn Stack Brd, 2.54Mm, 3Pos, Hdr; |Samtec, Inc. ZW-03-10-G-S-260-280 RoHS : Compliant |
| 374 | ||
| MTSW-120-08-G-S-265 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 20Pos; |Samtec, Inc. MTSW-120-08-G-S-265 RoHS : Compliant |
| 369 | ||
| SS26V-080350 | KEMET Corporation | Common Mode Filter, 35Mh, 0.8A; |Kemet SS26V-080350 RoHS : Compliant |
| 139 | ||
| DW-18-08-G-S-265 | Samtec Inc | Conn Stack Brd, 2.54Mm, 18Pos, Hdr; |Samtec, Inc. DW-18-08-G-S-265 RoHS : Compliant |
| 137 | ||
| MCABS-266-RC | SPC Multicomp | Speaker, Miniature, 0Hz-20Khz, 3W; |Multicomp Pro MCABS-266-RC RoHS : Compliant |
| 50 | ||
| MIKE19/1M/SMAM/S/S/26 | Siretta Ltd | Patch Antenna, 1.575Ghz, 23.39Dbi; |Siretta MIKE19/1M/SMAM/S/S/26 RoHS : Compliant |
| 10 | ||
![]() Analog Devices Inc | MAX6390XS26D4+T | Analog Devices Inc | SC70/µDFN, Single/Dual Low-Vol RoHS : Compliant |
| 37,500 | |
| MAX6443US26L+T | Analog Devices Inc | µP Reset Circuits with Long Ma RoHS : Compliant |
| 23,167 | ||
| MAX6444US26L+T | Analog Devices Inc | µP Reset Circuits with Long Ma RoHS : Compliant |
| 18,011 | ||
| MAX6386XS26D3+T | Analog Devices Inc | SC70/µDFN, Single/Dual Low-Vol RoHS : Compliant |
| 15,433 | ||
| MAX6387XS26D3+T | Analog Devices Inc | SC70/µDFN, Single/Dual Low-Vol RoHS : Compliant | 7,500 | |||
| MAX6443US26L+ | Analog Devices Inc | µP Reset Circuits with Long Ma RoHS : Compliant | 3,012 | |||
| MAX6314US26D4+ | Analog Devices Inc | 68HC11/Bidirectional-Compatibl RoHS : Compliant | 2,295 | |||
| MAX6467US26D3+ | Analog Devices Inc | Microprocessor Supervisory Res RoHS : Compliant | 0 | |||
| MAX6314US26D3+ | Analog Devices Inc | 68HC11/Bidirectional-Compatibl RoHS : Compliant | 0 | |||
| MAX6315US26D4+ | Analog Devices Inc | Open-Drain SOT µP Reset Circui RoHS : Compliant | 0 | |||
| MAX6314US26D1+ | Analog Devices Inc | 68HC11/Bidirectional-Compatibl RoHS : Compliant | 0 | |||
| MAX6804US26D3+ | Analog Devices Inc | 4-Pin, Low-Power µP Reset Circ RoHS : Compliant | 0 | |||
| MAX6421US26+ | Analog Devices Inc | Low-Power, SC70/SOT Microproce RoHS : Compliant | 0 | |||
| MAX6423US26+ | Analog Devices Inc | Low-Power, SC70/SOT µP Reset C RoHS : Compliant | 0 | |||
| MAX6390XS26D4+ | Analog Devices Inc | SC70/µDFN, Single/Dual Low-Vol RoHS : Compliant | 0 | |||
![]() NXP Semiconductors | MFS2613HMDDCAD | NXP Semiconductors | Safety System Basis Chip with Low Power for ASIL D, LQFP-48 Tray, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 5,160 | |
| SFS2600HMBEDAD | NXP Semiconductors | S32K148 for Infotainment Application, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 745 | ||
| SFS2633HMDEZAD | NXP Semiconductors | S32K396 for BMS Application, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 567 | ||
| MFS2613HMDA4AD | NXP Semiconductors | Safety System Basis Chip with Low Power for ASIL D, LQFP-48 Tray, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 3,569 | ||
| SFS2631HMDDYAD | NXP Semiconductors | TC387 for inverter Application, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 1,000 | ||
| SFS2620HMBGBAD | NXP Semiconductors | AM2634 for OBC Application, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 679 | ||
| MFS2613HMDA6AD | NXP Semiconductors | Safety System Basis Chip with Low Power for ASIL D, LQFP-48 Tray, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 3,685 | ||
| MFS2623HMDAEAD | NXP Semiconductors | Safety System Basis Chip with Low Power for ASIL D, LQFP-48 Tray, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 500 | ||
| KITFS26SKTEVM | NXP Semiconductors | FS26 Safety SBC Programming Socket Board, RoHS : Compliant |
| 0 | ||
| LPC55S26JEV98K | NXP Semiconductors | LPC552x/S2x: Mainstream Arm® Cortex®-M33-based Microcontroller Family, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 3,127 | ||
| MFS2613HMDAAAD | NXP Semiconductors | Safety System Basis Chip with Low Power for ASIL D, LQFP-48 Tray, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 790 | ||
| MFS2633HMDAMAD | NXP Semiconductors | Safety System Basis Chip with Low Power for ASIL D, LQFP-48 Tray, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 999 | ||
| SFS2613HMDFKAD | NXP Semiconductors | S32K344 for BMS Application, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 850 | ||
| SFS2631HMDEXAD | NXP Semiconductors | TC387 for DC/DC Application, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 500 | ||
| SFS2633HMDG6AD | NXP Semiconductors | SPC58NH for BMS Application, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 500 | ||
![]() RS | VS-26MB160A | Vishay Intertechnologies | RECTIFIER BRIDGE GLASS PASSIVATED SINGLE PHASE 1600 V -55 DEGC 150 DEGC RoHS : Compliant |
| 1,634 | |
| BNS260-02/01Z-ST-R (101184362) | Schmersal | SAFETY SENSOR, CODED MAGNET, 2) NC CONTACTS,1) NC SIGNALING CONTACT, RT HAND DOO |
| 26 | ||
| VS26S511DF213A | Norgren | VALVE, 5/2, SOL/SOL, 24VDC, LOCK, SOFT SEAL SPOOL |
| 11 | ||
| VS26SB11DF213A | Norgren | VALVE, 2X3/2 NO, SOL/SPRING RTN, INT PILOT, 3-10 BAR, 24VDC, PUSH/TURN OVERRIDE |
| 7 | ||
| M2SS2-60B01 | ABB Low Voltage Products and Systems | 2POS KNOB A-C BLK CMR 1NC MAIN |
| 3 | ||
| VS26SB11DF313A | Norgren | VALVE, DBL SOL, SPR RTN, NO, 24V, 2X3/2, 145PSI, 1250L/M, VS26 SERIES |
| 3 | ||
| VS2672932-KG00 | Norgren | VALVE, PILOT |
| 2 | ||
| SM31EMHS (26411) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, EMITTER, 3M, 10-30VDC, CABLE, MINI-BEAM |
| 2 | ||
| BNS260-02ZG-ST-L (101184381) | Schmersal | SAFETY SENSOR, CODED MAGNET, 2) NC CONTACTS, LED, LEFT HAND DOOR |
| 2 | ||
| BHS0033 (BES 516-300-S265-S4-D) | Balluff Inc | INDUCTIVE SENSOR, 1.5 MM RANGE, M12 FLUSH, PNP-NO, 10-30 VDC, BES SERIES |
| 2 | ||
| ALPHA15/2.5M/SMAM/S/S/26 (8968257) | Siretta Ltd | ANTENNA, QUAD BAND GSM AND 3G PUCK ANTENNA, ADHESIVE MOUNT, 2DBI, SMA, 2.5M |
| 2 | ||
| TANGO17/5M/LL/SMAM/S/S/26 (1248710) | Siretta Ltd | ANTENNA, 3G/GSM/GPRS BELL ANTENNA IP67 SMA-M 5M |
| 2 | ||
| VS26G517DF218A | Norgren | VALVE, 5/2, SOL/SPRING, 115VAC, VS26 SERIES |
| 1 | ||
| BNS260-11/01Z-R (101184372) | Schmersal | SAFETY SENSOR, CODED MAGNET, 1)NO/1)NC CONTACTS, NC SIGNALING CONTACT, RH DOOR |
| 1 | ||
| BFS0001 (BFS 26K-PS-L01-S115) | Balluff Inc | SENSOR, PHOTOELECTRIC, COLOR, BLOCK, WHITE LIGHT, 32MM, (3) PNP, TEACH-IN, LO |
| 1 | ||
![]() STMicroelectronics | STS26N3LLH6![]() | STMicroelectronics | N-channel 30 V, 0.0038 Ohm, 26 A, SO-8 STripFET(TM) VI DeepGATE(TM) Power MOSFET RoHS : Compliant |
| 78 | |
![]() Microchip Technology Inc | MCP6S26-I/SL![]() | Microchip Technology Inc | 6-Chan. 12 MHz SPI PGA, SOIC, Projected EOL: 2036-04-04 RoHS : Compliant |
| 52,175 | |
MCP6S26-I/P![]() | Microchip Technology Inc | 6-Chan. 12 MHz SPI PGA, PDIP, Projected EOL: 2036-04-04 RoHS : Compliant |
| 5,134 | ||
MCP6S26T-I/ST![]() | Microchip Technology Inc | 6-Chan. 12 MHz SPI PGA, TSSOP, Projected EOL: 2036-04-04 RoHS : Compliant |
| 2,500 | ||
MCP6S26-I/ST![]() | Microchip Technology Inc | 6-Chan. 12 MHz SPI PGA, TSSOP, Projected EOL: 2036-04-04 RoHS : Compliant |
| 2,282 | ||
| UES2603 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 861 | ||
| UES2605HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 284 | ||
| UES2606 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 79 | ||
| UES2602 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 17 | ||
| TFS265 | Microchip Technology Inc | TFS265, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| TFS265A | Microchip Technology Inc | TFS265A, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | |||
| UES2601 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| TFS261B | Microchip Technology Inc | TFS261B, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | |||
| TFS2655B | Microchip Technology Inc | TFS2655B, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| UES2606R | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2602R | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 1056-SS-26 | RAF Electronic Hardware | 1,950 | |||
| 7109-S-26 | RAF Electronic Hardware | 300 | ||||
| 4542-632-SS-26 MODB=3/8 | RAF Electronic Hardware | 217 | ||||
| 0107-SS-26 | RAF Electronic Hardware | 123 | ||||
| 1-MFS-2-6 | SOCKET SCREWS | 100 | ||||
| M0321-SS-26 | RAF Electronic Hardware | 79 | ||||
| MS 26TB06 GME 07E | Marathon Motors | 15 | ||||
| 0165-SS-26 | RAF Electronic Hardware | 10 | ||||
| 7108-SS-26 | RAF Electronic Hardware | 7 | ||||
| S-264-2 | MISC. INDUSTRIAL HRD | 4 | ||||
| 1179-10-SS-26 | RAF Electronic Hardware | 2 | ||||
| FS436US26D | MISCELLANEOUS | 1 | ||||
| SS2-64 | WM Berg | 1 | ||||
| 14002-R-SS-.265-12A | Accurate Screw Machine | 1 | ||||
| 25EM26S-26 | WM Berg | 1 | ||||
![]() Rochester Electronics | MFS2630AMDA0AD | NXP Semiconductors | Adjustable, 8 Channel, CMOS, PQFP48 RoHS : Compliant |
| 1,647 | |
| NCP163AFCS260T2G | onsemi | LDO Regulator, 250 mA, Ultra-High PSRR, Ultra-Low Noise 2.6 V, Active Discharge RoHS : Compliant |
| 110,000 | ||
| S26KS256SDGBHV030 | Infineon Technologies AG | HyperFlash - NOR 256Mbit 32M x 8 1.7V - 1.95V HyperBus 133MHz 96ns 24-BGA Tray RoHS : Compliant |
| 329 | ||
| S26HS01GTFPBHI020 | Infineon Technologies AG | FLASH - NOR (SLC) 1Gbit 128M x 8 1.7V - 2V HyperBus 166MHz 5.45ns 1.7ms 24-BGA Tray RoHS : Compliant |
| 100 | ||
| S26HS512TGABHI000 | Infineon Technologies AG | FLASH - NOR (SLC) 512Mbit 64M x 8 1.7V - 2V HyperBus 200MHz 5.45ns 1.7ms 24-BGA Tray RoHS : Compliant |
| 216 | ||
TMDS261BPAGR![]() | Texas Instruments | Video Processor Switch Consumer Video 64-QFP T/R RoHS : Compliant |
| 126,230 | ||
TMDS261PAGR![]() | Texas Instruments | Consumer Circuit, PQFP64 RoHS : Compliant |
| 120,000 | ||
S26KL128SDABHA030![]() | Cypress Semiconductor | HyperFlash - NOR 128Mbit 16M x 8 2.7V - 3.6V HyperBus 100MHz 96ns 24-BGA Tray RoHS : Compliant |
| 878 | ||
| S26KL256SDABHN020 | Cypress Semiconductor | HyperFlash - NOR 256Mbit 32M x 8 2.7V - 3.6V HyperBus 100MHz 96ns 24-BGA Tray RoHS : Compliant |
| 878 | ||
| S26KS128SDGBHN030 | Cypress Semiconductor | HyperFlash - NOR 128Mbit 16M x 8 1.7V - 1.95V HyperBus 133MHz 96ns 24-BGA Tray RoHS : Compliant |
| 878 | ||
| S26KS256SDGBHV030 | Cypress Semiconductor | HyperFlash - NOR 256Mbit 32M x 8 1.7V - 1.95V HyperBus 133MHz 96ns 24-BGA Tray RoHS : Compliant |
| 1,178 | ||
MAX6468XS26D1+![]() | Maxim Integrated Products | MAX6468XS26D1 Triple Ultra-Low-Voltage Microprocessor Supervisory Circuit RoHS : Compliant |
| 2,350 | ||
| DM54LS260W/883 | National Semiconductor Corporation | NOR Gate, LS Series, 2-Func, 5-Input, TTL, CDFP14 RoHS : Not Compliant |
| 8 | ||
| DS26F32MJ | National Semiconductor Corporation | Line Receiver, 1 Func, 4 Rcvr, BIPolar, CDIP16 RoHS : Not Compliant |
| 298 | ||
| S26KS256SDGBHV030 | Spansion | HyperFlash - NOR 256Mbit 32M x 8 1.7V - 1.95V HyperBus 133MHz 96ns 24-BGA Tray RoHS : Compliant |
| 840 | ||
![]() Sager | ZW-01-07-T-S-260-090 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 434 | |
| ZW-03-10-G-S-260-280 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 374 | ||
| 82A0111-10-9CS2630 | TE Connectivity | TE Connectivity | 0 | |||
| MTSW-124-24-S-S-260 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZF5S-26-03-T-WT-TR | Samtec Inc | Headers & Wire Housings Zero Insertion Force Connector for FFC, 0.50 mm (.0197) Pitch RoHS : Compliant |
| 0 | ||
| TW-31-07-L-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-32-06-T-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-33-02-G-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-34-09-F-S-260-090 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-35-02-F-S-263-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-35-07-T-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TFSS-26-28C-G-18.00-D-NUS | Samtec Inc | .050 TIGER EYE� SINGLE ROW DISCRETE WIRE CABLE ASSEMBLY, TERMINAL |
| 0 | ||
| MTSW-101-07-G-S-267 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-104-24-L-S-266 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-108-22-S-S-265-NA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
![]() Coilcraft Direct | 0805CS-261XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 0 | |
| 0805CS-261XJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1008HS-261TJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
![]() TME | BPS 260-1 | Schmersal | Magnet; IP67; -25÷70°C; 26x36x13mm |
| 84 | |
| BNS 260-11Z-ST-R | Schmersal | Safety switch: magnetic |
| 8 | ||
| DTS26W25-44420SB-S16 | TE Connectivity | Connector: circular; straight |
| 5 | ||
| DTS26Z15-35SA[V001] | TE Connectivity | Connector: circular; plug; PIN: 37; straight; gold-plated RoHS : Compliant |
| 4 | ||
| D-500-0468-1-613-240-TCS26 | TE Connectivity | Wire: assembly |
| 2 | ||
| DTS26K17-35SA | TE Connectivity | Connector: circular; plug; PIN: 55; straight; gold-plated RoHS : Compliant |
| 2 | ||
| ATBS-265-0405 | Amphenol Corporation | Connector: automotive RoHS : Compliant |
| 0 | ||
DS26C32ATMX/NOPB![]() | Texas Instruments | IC: interface; line receiver; RS422,RS423; SO16; 4.5÷5.5VDC RoHS : Compliant |
| 0 | ||
| EOS2 609 XS | ReeR spa | Safety light curtain; H: 610mm; 12m; EOS2 XS; Resolution: 90mm |
| 0 | ||
| ATBS-263-0405 | Amphenol Corporation | Connector: automotive RoHS : Compliant |
| 0 | ||
| B72510E1140S262 | TDK Corporation | Varistor: multilayer; SMD; 0805; 14VAC; 16VDC; 0.3J; 120A; 42V; 8mW RoHS : Compliant |
| 0 | ||
| B72530G1140S262 | TDK Corporation | Varistor: ceramics; SMD; 1210; 14VAC; 16VDC; 1.6J; 400A; 24.5V; 3nF RoHS : Compliant |
| 0 | ||
| B72580E1140S262 | TDK Corporation | Varistor: ceramics; SMD; 1812; 14VAC; 16VDC; 2.4J; 800A; 24.5V; 5.6nF RoHS : Compliant |
| 0 | ||
| EOS2 603 XM | ReeR spa | Safety light curtain; H: 610mm; 12m; EOS2 XM; Resolution: 30mm |
| 0 | ||
| EOS2 604 XS2 | ReeR spa | Safety light curtain; H: 610mm; 12m; EOS2 XS2; Resolution: 40mm |
| 0 | ||
![]() ComSIT USA | SS26T3G | ON SEMICONDUCTOR/ONSEMI | AVAILABLE EU | 283 | ||
| DS26LV32ATMNOPB | Texas Instruments | AVAILABLE EU | 29 | |||
| DS26C32ATMXNOPB | NATIONAL SEMI/TEXAS INSTRUMENTS | AVAILABLE EU | 677 | |||
| APX803S26SA7 | Diodes Incorporated | AVAILABLE EU | 278 | |||
| S263689C04 | SUNTECH CIRCUITS | AVAILABLE EU | 735 | |||
| DS26LV32ATMXNOPB | Texas Instruments | AVAILABLE EU | 51 | |||
![]() ComSIT USA | LYS269B0GROUPD | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED RoHS : Not Compliant | 9,000 | ||
| LYS269B0GROUPC | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED RoHS : Not Compliant | 3,000 | |||
| LYS269B0GROUPB | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED RoHS : Not Compliant | 3,000 | |||
| MAX6314US26D4T | Maxim Integrated Products | 68HC11/BIDIRECTIONAL-COMPATIBLE MICROPROCESSOR RESET CIRCUIT Power Supply Support Circuit, Fixed, 1 Channel, +2.63VV, CMOS, PDSO4 RoHS : Not Compliant | 2,365 | |||
| DS26C31TM | National Semiconductor Corporation | CMOS QUAD TRI-STATE DIFFERENTIAL LINE DRIVER Line Driver, 4 Func, 4 Driver, CMOS, PDSO16 RoHS : Not Compliant | 1,471 | |||
| KOZRBS2617 | Kaco New Energy | Electronic Component RoHS : Not Compliant | 1,169 | |||
| LGS260D0GEGURT | Siemens | Electronic Component RoHS : Not Compliant | 960 | |||
| SS26E352T | Vishay Intertechnologies | SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Rectifier Diode, Schottky, 1 Phase, 1 Element, 2A, 60V V(RRM), Silicon, DO-214AA RoHS : Compliant | 915 | |||
| DS26LS31CMX | National Semiconductor Corporation | QUAD HIGH SPEED DIFFERENTIAL LINE DRIVER Line Driver, 4 Func, 4 Driver, BIPolar, PDSO16 RoHS : Not Compliant | 285 | |||
| DS26LV32ATM | National Semiconductor Corporation | 3V ENHANCED CMOS QUAD DIFFERENTIAL LINE RECEIVER Line Receiver, 4 Func, 4 Rcvr, CMOS, PDSO16 RoHS : Not Compliant | 155 | |||
| DV8526515S2600RA | dev | Electronic Component RoHS : Compliant | 88 | |||
| DS26C32ATM | National Semiconductor Corporation | QUAD DIFFERENTIAL LINE RECEIVER Line Receiver, 4 Func, 4 Rcvr, CMOS, PDSO16 RoHS : Not Compliant | 36 | |||
| DS26C31MJ883Q | National Semiconductor Corporation | CMOS QUAD TRI-STATE DIFFERENTIAL LINE DRIVER Line Driver, 4 Func, 4 Driver, CMOS, CDIP16 RoHS : Not Compliant | 25 | |||
| TGS2620 | FIGARO Engineering Inc | Electronic Component RoHS : Not Compliant | 25 | |||
| DS26C31TN | National Semiconductor Corporation | CMOS QUAD TRI-STATE DIFFERENTIAL LINE DRIVER Line Driver, 4 Func, 4 Driver, CMOS, PDIP16 RoHS : Not Compliant | 19 | |||
![]() GLYN GmbH & Co. KG | P0840VGF1MA00-CS-26134 | Tianma Micro-electronics Co | TFT 8.40", 640x480, IPS, 900cd, RGB (TTL) | 15 | ||
![]() Interstate Connecting Components | YDTS26F09-98ADV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | ||
| YDTS26F11-99BAV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F13-08ANV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F13-98ACV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F15-97BEV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F17-08BCV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F19-32AEV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F19-35SAC001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F23-35SAV001 | TE Connectivity | PLUG ASSY RoHS : Not Compliant | 0 | |||
| YDTS26F25-19BNV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F25-20BNV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26W09-98PNV001 | TE Connectivity | PLUG ASSY RoHS : Not Compliant | 0 | |||
| YDTS26W11-35BBV001 | TE Connectivity | PLUG ASSY RoHS : Not Compliant | 0 | |||
| YDTS26W13-04BNV001 | TE Connectivity | PLUG ASSY RoHS : Not Compliant | 0 | |||
| YDTS26W15-18ABV001 | TE Connectivity | PLUG ASSY RoHS : Not Compliant | 0 | |||
![]() NexGen Digital | TGS2612-D01 | FIGARO Engineering Inc | 260,850 | |||
| TPS26400PWPR | Texas Instruments | RoHS : Compliant | 83,476 | |||
| DS26514GN+ | Analog Devices Inc | RoHS : Compliant | 900 | |||
PTVS26VZ1USKYL![]() | Nexperia | RoHS : Compliant | 779 | |||
| SN74LS26N | Motorola Semiconductor Products | RoHS : Not Compliant | 200 | |||
| DS26LS32ACN | National Semiconductor Corporation | RoHS : Not Compliant | 108 | |||
| MURS260T3G | onsemi | RoHS : Compliant | 17 | |||
| TKS2606CT-ND | TOKO Inc | 8 | ||||
![]() PEI Genesis | SM20WL3S26 | SOURIAU-SUNBANK |
| 490 | ||
| S2613-0012 | SOURIAU-SUNBANK |
| 0 | |||
| S2630-2406-34 | SOURIAU-SUNBANK |
| 0 | |||
| GRA.2S.269.GR | LEMO connectors |
| 0 | |||
| S2636-1403-34 | SOURIAU-SUNBANK |
| 0 | |||
| S2636-2006-34 | SOURIAU-SUNBANK |
| 0 | |||
| S2673-0904-4S | SOURIAU-SUNBANK |
| 0 | |||
| WS-26 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| GRA.0S.269.GR | LEMO connectors |
| 0 | |||
| GRA.3S.269.GM | LEMO connectors |
| 0 | |||
| S2630-1805-34 | SOURIAU-SUNBANK |
| 0 | |||
| S2647-03C | SOURIAU-SUNBANK |
| 0 | |||
| S2647-06 | SOURIAU-SUNBANK |
| 0 | |||
| RQP0B1-7S-26-M1-M150 | Ulti-Mate Connector Inc |
| 0 | |||
| 8D717S26PD | SOURIAU-SUNBANK | RoHS : Unknown |
| 0 | ||
![]() Powell Electronics | 55FB1521-16-FLT2-0CS2636 | TE Connectivity | Connectors |
| 4,288 | |
| MTMM-102-08-T-S-264 | Samtec Inc | PCB Header, 2.00mm Pitch, SMT, Male, Mal RoHS : Compliant |
| 1,419 | ||
| 22759/43-16-9CS2621 | TE Connectivity | Connectors RoHS : Compliant |
| 1,254 | ||
| MTLW-103-24-T-S-268 | Samtec Inc | PCB Header, 2.00mm Pitch, Through-Hole, RoHS : Compliant |
| 832 | ||
| MTSW-116-08-S-S-260 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 352 | ||
| TW-06-09-SM-S-267-120 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 344 | ||
| MTMM-112-07-L-S-260 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 287 | ||
| ZW-01-07-T-S-260-090 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 286 | ||
| ZW-03-10-G-S-260-280 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 247 | ||
| MTSW-120-08-G-S-265 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 244 | ||
| YDTS26W09-98PNV001 | TE Connectivity | PLUG ASSY RoHS : Not Compliant |
| 134 | ||
| YDTS26W15-19PNV001 | TE Connectivity | DTS26 PLUG SZ15-19 PIN CAD RoHS : Not Compliant |
| 86 | ||
| YDTS26F11-98JNV001 | TE Connectivity | DTS26 PLUG SZ11-98 SKTHC EN RoHS : Compliant |
| 66 | ||
| YDTS26W13-04SAV001 | TE Connectivity | PLUG ASSY RoHS : Not Compliant |
| 22 | ||
| YDTS26W15-35PBV001 | TE Connectivity | PLUG ASSY RoHS : Compliant |
| 3 | ||
![]() PUI | SS26-HF | 25,000 | ||||
| 2211-1X06G00S/2.6/2.8B | 1,113 | |||||
| 2211-1X04G00S-2.6-2.8B | 499 | |||||
| 2211-2X40G00S-2.6-2.8B | 333 | |||||
| 2211-1X01G00S-2.6-2.8 | 200 | |||||
| 2011-2X03G00S-2.6-10.9B-I | 200 | |||||
| 2211-1X09G00S-2.6-2.8B | 153 | |||||
| 2211-1X07G00S/2.6/2.8B | 34 | |||||
![]() Richardson RFPD | 3P5MST-13S26-3P5MST-24 | Acuity Brands Lighting Inc | RFTEST CABLE ASSY RoHS : Compliant | 10 | ||
| SMAMST-13S26-SMAMST-24 | Acuity Brands Lighting Inc | RFTEST CABLE ASSY RoHS : Compliant | 4 | |||
| AGPS26MMMC | Amphenol PCTEL | Antenna Unit RoHS : Not Compliant |
| 0 | ||
| HP12S26-600TH | Wall Industries Inc | Brick Style DC/DC Converter RoHS : Not Compliant | 0 | |||
| NMST-13S26-NMST-24 | Acuity Brands Lighting Inc | RFTEST CABLE ASSY RoHS : Compliant | 0 | |||
| CCR-58S26C-T | Teledyne Relays | RF Switch 0MHz to 26.5GHz 50dB RoHS : Not Compliant | 0 | |||
| FB48S26-300TH | Wall Industries Inc | DCTODC CONVERTR MOD | 0 | |||
| 3P5MST-13S26-3P5FST-24 | Acuity Brands Lighting Inc | RFTEST CABLE ASSY RoHS : Compliant | 0 | |||
| ATS-HP-D3L70S26W-111 | Advanced Thermal Solutions Inc | Thrml Mgmt Access Round Heat Pipe Copper Alloy RoHS : Compliant |
| 0 | ||
| 3P5FST-13S26-3P5FST-36 | Acuity Brands Lighting Inc | RFTEST CABLE ASSY RoHS : Compliant | 0 | |||
| S26P200D15Y | Tamura Corporation of America | Closed Loop Current Sensor AC/DC Current ±12V/±15V RoHS : Compliant |
| 0 | ||
| FDS2672 | onsemi | Trans MOSFET N-CH 200V 3.9A 8-Pin SOIC T/R RoHS : Compliant | 0 | |||
| HFSMAMST-13S26-HFSMAMST-36 | Acuity Brands Lighting Inc | RFTEST CABLE ASSY RoHS : Compliant | 0 | |||
| TS260MC | Spectrum Control | Conn SMA 0Hz to 26.5GHz 50Ohm ST M Gold RoHS : Compliant |
| 0 | ||
| HVMLS263M7R5EA0C | Knowles CDE | Ultra Long Life, Aluminum Electrolytic Capacitor RoHS : Not Compliant | 0 | |||
![]() Rutronik | SS26-E3/52T | Vishay Intertechnologies | SCHOTTKY-DIODE 2A 60V SMB RoHS : Compliant |
| 59,250 | |
| SISS26LDN-T1-UE3 | Vishay Intertechnologies | N-CH 60V 81.2A 3.4mOhm PPAK1212-8S RoHS : Compliant |
| 6,000 | ||
| SS26S-E3/61T | Vishay Intertechnologies | SCHOTTKY-DIODE 2A 60V SMA RoHS : Compliant |
| 3,600 | ||
| SM8S26AHM3/I | Vishay Intertechnologies | TRANSIL AUTO 0,008KW 26V DO218AC RoHS : Compliant |
| 750 | ||
| IAUS260N10S5N019TATMA1 | Infineon Technologies AG | N-CH 100V 260A 1,6mOhm TOLT RoHS : Compliant |
| 19 | ||
![]() Chip 1 Exchange | SS26HE3_A/H | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 117,000 | ||
| LS-S260-DO | OSRAM GmbH | INSTOCK | 66,000 | |||
| B72500T1140S260 | INSTOCK | 10,034 | ||||
| OSS260 | INSTOCK | 9,000 | ||||
| YDTS26W09-98PNV001 | TE Connectivity | INSTOCK RoHS : Not Compliant | 6,293 | |||
| LGS260-D0 | OSRAM GmbH | INSTOCK | 3,000 | |||
| STIFTWANNE MKS 2654 | STOCK | INSTOCK | 2,037 | |||
| DS26LS31CMX | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 1,892 | |||
| STIFTWANNE MKS 2660 | STOCK | INSTOCK | 1,008 | |||
| MPZ1608S260ATDH5 | TDK Corporation | INSTOCK RoHS : Compliant | 911 | |||
| 74LS26LYOP | Texas Instruments | INSTOCK | 495 | |||
| DS26C31TN | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 421 | |||
| PS2601 | INSTOCK | 49 | ||||
| 74LS266 | INSTOCK | 15 | ||||
DS26LV31TM/NOPB![]() | Texas Instruments | INSTOCK RoHS : Compliant | 10 | |||
![]() Avnet Abacus | B72510E1140S262 | TDK Corporation | (Alt: B72510E1140S262) RoHS : Compliant | 72,000 | ||
| MPZ1608S260ATDH5 | TDK Corporation | Ferrite Bead 0603 1608 Metric 26 ohm 6 A MPZ Series 0007 ohm 25 (Alt: MPZ1608S260ATDH5) RoHS : Compliant | 16,000 | |||
| B82725S2602N41 | TDK Corporation | (Alt: B82725S2602N041) RoHS : Compliant | 10,000 | |||
ABLS2-6.000MHZ-D4Y-T![]() | Abracon Corporation | Crystal Surface Mount 6 MHz SMD 114mm x 47mm 30 ppm 18 pF 30 ppm ABLS2 Series - Tape and Reel (Alt: ABLS2-6.000MHZ-D4Y-T) RoHS : Compliant | 3,000 | |||
| B72220S2681K101 | TDK Corporation | (Alt: B72220S2681K101) RoHS : Compliant | 2,000 | |||
| 10090929-S264XLF | Amphenol Corporation | D Sub Connector High Density Receptacle FCI 10090929 Series 26 Contacts DA Solder (Alt: 10090929-S264XLF) RoHS : Compliant | 1,540 | |||
| ECS-260-10-33B-CKM-TR | ECS International Inc | - Tape and Reel (Alt: ECS-260-10-33B-CKM-TR) RoHS : Compliant | 1,000 | |||
| 579S260CAT | CTS Corporation | - Tape and Reel (Alt: 579S260CAT) RoHS : Compliant | 0 | |||
| SS26V-080350 | KEMET Corporation | Choke Common Mode 35 mH 800 mA (Alt: SS26V-080350) RoHS : Compliant | 0 | |||
| CG21AS26F474MR | Kyocera AVX Components | (Alt: CG21AS26F474MR) RoHS : Compliant | 0 | |||
| CAS26C152MARFC | KEMET Corporation | Ceramic Suppression Capacitor 1500 pF 20 X1 Y2 250 VAC 250 VAC 2211 5728 Metric (Alt: CAS26C152MARFC) RoHS : Compliant | 0 | |||
| CAS26C270GAGFC | KEMET Corporation | Ceramic Suppression Capacitor 27 pF 2 X1 Y2 250 VAC 250 VAC 2211 5728 Metric (Alt: CAS26C270GAGFC) RoHS : Compliant | 0 | |||
| CAS26C470MAGFC | KEMET Corporation | Ceramic Suppression Capacitor 47 pF 20 X1 Y2 250 VAC 250 VAC 2211 5728 Metric (Alt: CAS26C470MAGFC) RoHS : Compliant | 0 | |||
| CAS26C182MARFC | KEMET Corporation | Ceramic Suppression Capacitor 1800 pF 20 X1 Y2 250 VAC 250 VAC 2211 5728 Metric (Alt: CAS26C182MARFC) RoHS : Compliant | 0 | |||
| MTMM-112-07-L-S-260 | Samtec Inc | Pin Header BoardtoBoard WiretoBoard 1 Rows 12 Contacts Through Hole MTMM Series (Alt: MTMM-112-07-L-S-260) RoHS : Compliant | 0 | |||
![]() Avnet Asia | PB5615-S26 | PanJit Semiconductor | (Alt: PB5615-S26) RoHS : Compliant |
| 3,000 | |
| SS26HE3_A/H | Vishay Intertechnologies | Diode Schottky Barrier Rectifier 60V 2A 2-Pin DO-214AA Plastic T/R (Alt: SS26HE3_A/H) RoHS : Compliant | 0 | |||
| MPZ1608S260ATDH5 | TDK Corporation | Ferrite Bead, 0603 [1608 Metric], 26 ohm, 6 A, MPZ Series, 0.007 ohm, ? 25% (Alt: MPZ1608S260ATDH5) RoHS : Compliant | 0 | |||
| MPZ1608S260ATAH0 | TDK Corporation | Ferrite Bead, 0603 [1608 Metric], 26 ohm, 6 A, MPZ Series, 0.007 ohm, ? 25% (Alt: MPZ1608S260ATAH0) RoHS : Compliant | 0 | |||
| SS26SHE3_B/I | Vishay Intertechnologies | (Alt: SS26SHE3_B/I) RoHS : Compliant | 0 | |||
| SISS26LDN-T1-GE3 | Vishay Intertechnologies | (Alt: SISS26LDN-T1-GE3) RoHS : Compliant | 0 | |||
| SC14481B3MRS26QNCX | Renesas Electronics Corporation | (Alt: SC14481B3MRS26QNCX) RoHS : Compliant | 0 | |||
| CAS26C101KAGFC | KEMET Corporation | (Alt: CAS26C101KAGFC) RoHS : Compliant |
| 0 | ||
| HMTSW-102-24-T-S-266 | Samtec Inc | (Alt: HMTSW-102-24-T-S-266) RoHS : Compliant | 0 | |||
| VR20AS26F540R | Kyocera AVX Components | TVS Varistor, 18 VAC, 26 VDC, TransGuard Automotive, 54 V, Radial Leaded, Multilayer Varistor (MLV) (Alt: VR20AS26F540R) RoHS : Compliant | 0 | |||
| SS26HM3_A/H | Vishay Intertechnologies | Diode Schottky 2A 2-Pin DO-214AA T/R (Alt: SS26HM3_A/H) RoHS : Compliant | 0 | |||
PTVS26VS1UR,115![]() | Nexperia | TVS Diode, PTVSxS1UR Series, Unidirectional, 26 V, 42.1 V, SOD-123, 2 Pins (Alt: PTVS26VS1UR,115) RoHS : Compliant |
| 0 | ||
| FDS2672 | onsemi | Power MOSFET, N Channel, 200 V, 3.9 A, 0.07 ohm, SOIC, Surface Mount (Alt: FDS2672) RoHS : Compliant | 0 | |||
| TSSS2600 | Vishay Intertechnologies | (Alt: TSSS2600) RoHS : Compliant |
| 0 | ||
| SS26T3G | onsemi | Schottky Rectifier, 60 V, 2 A, Single, DO-214AA (SMB), 2 Pins, 630 mV (Alt: SS26T3G) RoHS : Compliant |
| 0 | ||
![]() Avnet Silica | MURS260T3G | onsemi | Power Rectifier UltraFast Recovery 2 A 600 V (Alt: MURS260T3G) RoHS : Compliant | 130,000 | ||
| MBRS260T3G | onsemi | Schottky Rectifier 60 V 2 A Single DO214AA SMB 2 Pins 630 mV (Alt: MBRS260T3G) RoHS : Compliant | 90,000 | |||
| DFLS260-7 | Diodes Incorporated | Schottky Rectifier 60 V 2 A Single PowerDI 123 2 Pins 620 mV (Alt: DFLS260-7) RoHS : Compliant | 54,000 | |||
| APX809S-26SR-7 | Diodes Incorporated | Voltage Detector 1 Monitor 26 V ActiveLowPushPull 1 V to 55 V SOT233 (Alt: APX809S-26SR-7) RoHS : Compliant | 3,000 | |||
| APX810S-26SR-7 | Diodes Incorporated | Reset Generator SOT23 TR 3K (Alt: APX810S-26SR-7) RoHS : Compliant | 3,000 | |||
| APX803S-26SR-7 | Diodes Incorporated | Reset Generator SOT23 TR 3K (Alt: APX803S-26SR-7) RoHS : Compliant | 3,000 | |||
| SS26T3G | onsemi | Schottky Rectifier 60 V 2 A Single DO214AA SMB 2 Pins 630 mV (Alt: SS26T3G) RoHS : Compliant | 2,500 | |||
| MFS2630AMBA0AD | NXP Semiconductors | (Alt: MFS2630AMBA0AD) RoHS : Compliant | 1,000 | |||
| MFS2613HMDHKAD | NXP Semiconductors | EFS26 (Alt: MFS2613HMDHKAD) RoHS : Compliant | 500 | |||
| MFS2633HMDAKAD | NXP Semiconductors | EFS26 (Alt: MFS2633HMDAKAD) RoHS : Compliant | 250 | |||
| MFS2633AMDA0AD | NXP Semiconductors | (Alt: MFS2633AMDA0AD) RoHS : Compliant | 250 | |||
| MFS2630AMDA0AD | NXP Semiconductors | (Alt: MFS2630AMDA0AD) RoHS : Compliant | 0 | |||
| MFS2633AMDAKAD | NXP Semiconductors | System Basis Chip SPI 32 V to 36 V 48 Pins LQFPEP (Alt: MFS2633AMDAKAD) RoHS : Compliant | 0 | |||
| NCP163AFCS260T2G | onsemi | LDO Regulator 250 mA UltraHigh PSRR UltraLow Noise 26 V Active Discharge ONSSPCLDO (Alt: NCP163AFCS260T2G) RoHS : Compliant | 0 | |||
| MFS2633AMDC3ADR2 | NXP Semiconductors | System Basis Chip SPI 32 V to 36 V 48 Pins LQFPEP (Alt: MFS2633AMDC3ADR2) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AMMLPAAVJS-26.0000T | Abracon Corporation |
| 0 | ||
| AMMLPEAXRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPFLBLRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPABXRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPFLBVJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVAXCS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPEBVRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPDBLJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPEBLCS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPAALJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVBVJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPABLJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPFLBVCS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPABLCS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVAXRS-26.0000T | Abracon Corporation |
| 0 | |||
![]() Chip-Germany GmbH | SS26-0B00-02 | Broadcom Limited | 10,000 | |||
| S26KS256SDPBHV023 | 5,000 | |||||
| S26KS256SDPBHB020 | 5,000 | |||||
| MAX6314US26D4 | Maxim Integrated Products | 10 | ||||
![]() Component Electronics, Inc | WP7104-GS26 | Kingbright | IN STOCK SHIP TODAY | 2,000 | ||
| DS26S10CV | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 750 | |||
| DS26C32ATM | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 714 | ||
| DS26C31TN | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 180 | ||
| MPZ1608S260ATAH0 | TDK Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 100 | ||
| DS26C32ACN | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 87 | |||
| DS26C31TM | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 65 | ||
| CGS262T350X5C3PL | Mallory Sonalert Products Inc | IN STOCK SHIP TODAY |
| 60 | ||
| DS26LS32ACN | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 34 | ||
| IDS-26 | RN | IN STOCK SHIP TODAY |
| 20 | ||
| PS2-61 | Keyence Corporation | IN STOCK SHIP TODAY |
| 5 | ||
| DS26C32ATMX | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4 | ||
| HFS26R129N | Thomas & Betts | IN STOCK SHIP TODAY RoHS : Unknown | 4 | |||
| RIS-26 | Curtis Industries | IN STOCK SHIP TODAY |
| 3 | ||
| DS26F33MF-S | National Semiconductor Corporation | IN STOCK SHIP TODAY | 3 | |||
![]() DB Roberts | 8122-632-SS-26 | RAF Electronic Hardware | 0 | |||
| 8172-1032-SS-26 | RAF Electronic Hardware | 0 | ||||
| M0720-5-S-26 | RAF Electronic Hardware | 0 | ||||
| M3396-S-26 | RAF Electronic Hardware | 0 | ||||
| 1217-25-S-26 | RAF Electronic Hardware | 0 | ||||
| 0394-SS-26 | RAF Electronic Hardware | STAINLESS STEEL KNURLED HEAD CAPTIVE SCREW / ASSEMBLY | 0 | |||
| 7102-SS-26 | RAF Electronic Hardware | 0 | ||||
| 8058-440-S-26 | RAF Electronic Hardware | 0 | ||||
| 0107-SS-26 | RAF Electronic Hardware | 0 | ||||
| 2030-080-SS-26 | RAF Electronic Hardware | 0 | ||||
| 2065-440-SS-26 | RAF Electronic Hardware | 0 | ||||
| M2140-3005-SS-26 | RAF Electronic Hardware | 0 | ||||
| 1004-125-SS-26 | RAF Electronic Hardware | 0 | ||||
| 0453-SS-26 | RAF Electronic Hardware | 0 | ||||
| 1031-187-SS-26 | RAF Electronic Hardware | 0 | ||||
![]() EBV Elektronik | SS26-E3/52T | Vishay Intertechnologies | 2A 60V SMB SM SCHOTTKY RECT (Alt: SS26-E3/52T) RoHS : Compliant | 445,500 | ||
| 19-217/GHC-YR1S2/6T | Everlight Electronics Co Ltd | (Alt: S10B017470) RoHS : Compliant | 18,000 | |||
| SS26SHE3_B/H | Vishay Intertechnologies | Diode Schottky 60V 2A 2Pin DO214AC TR (Alt: SS26SHE3_B/H) RoHS : Compliant | 16,200 | |||
| SS26T3G | onsemi | Schottky Rectifier 60 V 2 A Single DO214AA SMB 2 Pins 630 mV (Alt: SS26T3G) RoHS : Compliant | 12,500 | |||
| SS26H | Taiwan Semiconductor | Diode Schottky 60V 2A 2Pin DO214AA TR (Alt: SS26H) RoHS : Compliant | 9,000 | |||
| TSSS2600 | Vishay Intertechnologies | (Alt: TSSS2600) RoHS : Compliant | 5,000 | |||
| MBRS260T3G | onsemi | Schottky Rectifier 60 V 2 A Single DO214AA SMB 2 Pins 630 mV (Alt: MBRS260T3G) RoHS : Compliant | 2,500 | |||
| CY8C4746LQS-S263 | Infineon Technologies AG | MCU 32Bit CY8C4746 ARM CortexM0 RISC 64KB Flash 171V to 55V 40Pin QFN Tray (Alt: SP005650575) RoHS : Compliant | 2,450 | |||
| S26KS256SDPBHI020 | Infineon Technologies AG | (Alt: SP005653893) RoHS : Compliant | 1,690 | |||
| S26HS512TGABHB000 | Infineon Technologies AG | NOR Flash 512Mbit 64M X 8bit SPI 18V 9ns 24Pin BGA Tray (Alt: SP005655835) RoHS : Compliant | 338 | |||
| MFS2630AMDA0AD | NXP Semiconductors | (Alt: MFS2630AMDA0AD) RoHS : Compliant | 250 | |||
| VS-26MT20 | Vishay Intertechnologies | Diode Rectifier Bridge Single 200V 25A 5Pin Case D63 (Alt: VS-26MT20) RoHS : Compliant | 0 | |||
| SS26-M3/5BT | Vishay Intertechnologies | 2A 60V SMB SM SCHOTTKY RECT (Alt: SS26-M3/5BT) RoHS : Compliant | 0 | |||
| SS26HE3_A/H | Vishay Intertechnologies | Diode Schottky Barrier Rectifier 60V 2A 2Pin DO214AA Plastic TR (Alt: SS26HE3_A/H) RoHS : Compliant | 0 | |||
| S26KS256SDGBHV030 | Infineon Technologies AG | NOR Flash 256Mbit 32M X 8Bit 3V 24Pin FBGA Tray (Alt: SP005653293) RoHS : Compliant | 0 | |||
![]() FDH Electronics | DTS26T23-55PE-LC | TE Connectivity | Connector |
| 164 | |
| NGT805HE-S2-6 | BURNDY | Identification | 156 | |||
| DTS26W09-98SN | TE Connectivity | Connector RoHS : Compliant |
| 90 | ||
| DTS26T09-35SD | TE Connectivity | Connector RoHS : Compliant |
| 83 | ||
| DTS26T09-98BB | TE Connectivity | Connector |
| 45 | ||
| DTS26F23-55PE-LC | TE Connectivity | Connector |
| 15 | ||
| DTS26W09-35AA | TE Connectivity | Connector |
| 6 | ||
| DTS26T23-35AD | TE Connectivity | Connector |
| 3 | ||
| DTS26F19-32PE-LC | TE Connectivity | Connector |
| 2 | ||
| DTS26F21-35PC | TE Connectivity | Connector |
| 2 | ||
| DTS26T19-32PE-LC | TE Connectivity | Connector |
| 1 | ||
| MS26574-7.5 | Crouzet | Circuit Protect |
| 0 | ||
| MS26574-10 | Safran Electrical & Power UK | Circuit Breaker | 0 | |||
| MS26574-10 | Crouzet | Circuit Protect |
| 0 | ||
| MS26574-51L | Safran Electrical & Power UK | Circuit Breaker | 0 | |||
![]() Flip Electronics | A2T18S260-12SR3 | NXP Semiconductors | Stock RoHS : Compliant | 22,000 | ||
| S26HS512TGABHI000 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 18,733 | ||
| LPC55S26JEV98K | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 14,248 | ||
| S26KL512SDABHI033 | Cypress Semiconductor | Stock | 7,657 | |||
| S26KL512SDABHV030 | Cypress Semiconductor | Stock, Ship Today RoHS : Compliant | 7,066 | |||
| S26HL512TFPBHI003 | Infineon Technologies AG | Stock RoHS : Compliant | 2,500 | |||
| S26KS128SDPBHN020 | Cypress Semiconductor | Stock, Ship Today RoHS : Compliant | 2,477 | |||
| S26KS256SDPBHN023 | Cypress Semiconductor | Stock | 2,019 | |||
| S26KS256SDGBHV030 | Cypress Semiconductor | Stock RoHS : Compliant | 1,947 | |||
| S26KL128SDABHV020 | Cypress Semiconductor | Stock, Ship Today RoHS : Compliant | 1,637 | |||
| S26KS128SDGBHN030 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 752 | ||
| S26KL128SDABHI023 | Cypress Semiconductor | Stock | 574 | |||
| S26HL512TFPBHV000 | Infineon Technologies AG | Stock RoHS : Compliant | 338 | |||
| S26KS256SDPBHV023 | Cypress Semiconductor | Stock | 277 | |||
| S26KS512SDGBHV033 | Cypress Semiconductor | Stock | 257 | |||
![]() Maritex | HL-PYT-1005S26YC-04 | Hongli Zhihui Group Co LTD | LED SMD; case 0402; amber; 586-595nm; 35-50mcd/5mA; 1.7-2.3V; water clear lens; 130 degrees; 1.0x0.5x0.4mm /6000 |
| 29,900 | |
| FPV160808S260PKT | Fenghua (HK) Electronics Ltd | Varistor SMD; 0603; 26VDC; 25pF RoHS : Compliant |
| 3,860 | ||
| SS26FL | onsemi | Rectifier Diodes & Bridges; SS26FL; ON SEMICONDUCTOR; 2 A; 60 V RoHS : Compliant |
| 3,361 | ||
DS26C32ATMX/NOPB![]() | Texas Instruments | Other Interface ICs; DS26C32ATMX/NOPB; TEXAS INSTRUMENTS; 16; 5.5 V; 4.5 V; SOIC RoHS : Compliant |
| 2,355 | ||
| TGS2611-C00 | FIGARO Engineering Inc | MOS-type methane gas sensor; range: 1-25%LEL; supply: 5V; power: 280mW |
| 1,801 | ||
| TGS2610-C00 | FIGARO Engineering Inc | MOS-type propane, butane gas sensor; range: 1-25%LEL; supply: 5V; power: 280mW |
| 1,036 | ||
| PBMS26S-CT | CONNTHERM | Pin Header; pitch 2.00mm; 1x26 pins; assembly: THT; female; straight; single row |
| 901 | ||
| TGS2610-D00 | FIGARO Engineering Inc | MOS-type propane, butane gas sensor; range: 1-25%LEL; supply: 5V; power: 280mW; filter built-in |
| 496 | ||
| SM24W3S26 | SOURIAU-SUNBANK | Male terminal; current 5A; for AWG26-24 RoHS : Compliant |
| 450 | ||
| SS26T3G | onsemi | Rectifier Diodes & Bridges; SS26T3G; ON SEMICONDUCTOR; 2; 2 A; 60 V; 200 �A RoHS : Compliant |
| 129 | ||
| TGS2600 | FIGARO Engineering Inc | MOS-type air pollutants gas sensor; range: 1-30ppm H2; supply: 5V; power: 210mW |
| 62 | ||
| TGS2603 | FIGARO Engineering Inc | MOS-type air pollutants gas sensor; range: 1-10ppm C2H5OH; supply: 5V; power: 240 mW |
| 43 | ||
| TGS2602 | FIGARO Engineering Inc | MOS-type air pollutants gas sensor; range: 1-30ppm C2H5OH; supply: 5V; power: 280mW |
| 34 | ||
| NS-26CW108-XHEQ38A2 | NiViss | MCPCB module; aluminium 5052; circle 108mm; 26 x XPEHEW-L1-00BE8; warm white; Q3; 8A2; cable red; blue 25cm; RoHS |
| 6 | ||
SN74LS266D![]() | Texas Instruments | Logic Gates; SN74LS266D; TEXAS INSTRUMENTS; 14; NOR, XNOR; 5.25 V; 4.75 V RoHS : Compliant |
| 2 | ||
![]() Master Electronics | IDSS-26-S-26.63 | Samtec Inc | RoHS : Compliant |
| 0 | |
| MTSW-124-24-S-S-260 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| NCP163AFCS260T2G | onsemi | LDO Regulator 250 mA Ultra-High PSRR Ultra-Low Noise 2.6 V Active Discharge RoHS : Compliant |
| 0 | ||
| YDTS26F11-98JNV001 | TE Connectivity | PLUG ASSY RoHS : Compliant |
| 0 | ||
| YDTS26F13-08SAV004 | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26F15-15SNV001 | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26F19-35SAC001 | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26F19-35SBV001 | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26F23-35PAV004 | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26F23-35SAV001 | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26G13-35PNV001 | TE Connectivity | DTS PLUG ENVELOPE MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26G19-32PAV001 | TE Connectivity | DTS PLUG ENVELOPE MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26T13-35SBV001 | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26T17-06SAC001 | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26W09-98PNV001 | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
![]() Neutron USA | B82725S2602N041 | TDK Corporation | Common Mode Chokes / Filters RING CORE CHOKE 2x7.8mH 6.0A RoHS : Compliant |
| 50 | |
| XS26-2E | Banner Engineering Corp | Safety Controller, Expandable, 26 Safe In, 8 Convert In, 4 Indep contrl Safe Out, 2 OSSD Pairs, 11 Non Safe Out PNP, 24Vdc, 85063 |
| 50 | ||
| ATS-HP-D3L70S26W-111 | Advanced Thermal Solutions Inc | Heat Sinks Heat Pipe, Copper, High Performance, Round, 70mm, 3mm dia. |
| 50 | ||
| 2AS2-6 | Altech Corporation | Switch Actuators Selec. Opr.,22 mm,3 Pos., |
| 19 | ||
| VS26S511DF213A | Norgren | Valve, 5/2, sol/sol, 24VDC, lock, soft seal spool |
| 11 | ||
| VS26SB11DF213A | Norgren | Valve, 2X3/2 NO, sol/spring rtn, int pilot, 3-10 bar, 24VDC, push/turn override |
| 7 | ||
| VS26S611DF213A | Norgren | Norgren VS26S611DF213A Solenoid Valve Island, 24 VDC, 2 to 10 bar, 5/3, VS26 Series |
| 6 | ||
| M2SS2-60B01 | ABB Low Voltage Products and Systems | 2POS KNOB A-C BLK CMR 1NC MAIN |
| 3 | ||
| S26361-F3781-E516-AX | Axiom Manufacturing | AXIOM 16GB DDR3-1600 LOW VOLTAGE ECC RDIMM FOR FUJITSU - S26361-F3781-E516, TOP |
| 0 | ||
| AFS26-30-22-13 | ABB Low Voltage Products and Systems | SAFETY CONTACTOR, 3P 690V, Aux: 2NO2NC, Control: 100-250VAC/DC, 45 A (AC-1) |
| 0 | ||
| PS263 | Black Box Corporation | BUY THIS BLACK BOX USB ENTENDER POWER SUPPLY TO ADD REDUNDANCY TO YOUR USB EXTEN |
| 0 | ||
| XS26-2DE, 85064 | Banner Engineering Corp | Safety Controllers XS26-2DE Safety Controller: Expandable; 26 Input; 2 pairs of PNP Safety Outputs (0.5 A each); Display; Ethernet; USB; 8 Convertible Inputs; Removable Screw Terminals; 24 V dc; 160 mA |
| 0 | ||
| TS-262-4G-US | Qnap Systems Inc | QNAP 2BAY DESKTOP NAS INTEL CEL INTEL N4505 2C/2T |
| 0 | ||
| M2SS2-60B02 | ABB Low Voltage Products and Systems | 2POS KNOB A-C BLK CMR 2NC |
| 0 | ||
| M2SS2-60B11 | ABB Low Voltage Products and Systems | 2POS KNOB; A&C; BLK; 1N0-1NC |
| 0 | ||
![]() Pasternack Enterprises US | PE3C2346/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240 Coax With Times Microwave Components with Double HeatShrink., Radio frequency assembly N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss N type to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2346/HS2-60 can also be known as a low loss N type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C2346/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2346/HS2-60 can also be used in the other direction and will be TNC male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink. |
| 4,213 | |
| PE3C1135/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with Times Microwave Components with Double HeatShrink., Radio frequency assembly TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1135/HS2-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C1135/HS2-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink. |
| 2,106 | ||
| PE3C0053/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Low Loss Cable 60 Inch Length Using LMR-240 Coax with Double Heatshrink., Radio frequency assembly N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C0053/HS2-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3C0053/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink. |
| 2,009 | ||
| PE3C3196/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Female to N Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMA female to N male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to N male low loss cable 60 inch length using LMR-195 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to type N cable assemblies have a female gender on end 1 and male on end 2. PE3C3196/HS2-60 can also be known as a low loss SMA jack to N type plug cable assembly and will be shipped same-day as it is purchased. SMA jack to type N plug cable assembly PE3C3196/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA female to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3196/HS2-60 can also be used in the other direction and will be N type male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to N male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 790 | ||
| PE3C6334/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male Right Angle to UHF Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly N male right angle to UHF male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to UHF male low loss cable 60 inch length using LMR-195 coax with double heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and UHF cable connection on the other. Our low loss right angle type N to UHF cable assemblies have a male gender on end 1 and male on end 2. PE3C6334/HS2-60 can also be known as a low loss right angle N type plug to UHF plug cable assembly and will be shipped same-day as it is purchased. Type N plug to UHF plug cable assembly PE3C6334/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency N type right angle male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6334/HS2-60 can also be used in the other direction and will be UHF male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UHF cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to UHF male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 254 | ||
| PE3C0108/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to N Female Bulkhead Cable 12 Inch Length Using LMR-240 Coax with Double HeatShrink., Radio frequency assembly TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and N type bulkhead cable connection on the other. Our TNC to type N cable assemblies have a male gender on end 1 and female on end 2. This TNC to type N cable is a male to female coax assembly, PE3C0108/HS2-60, can also be known as a TNC plug to type N jack cable assembly and will be shipped same-day as it is purchased. TNC plug to N type jack cable assembly PE3C0108/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0108/HS2-60 can also be used in the other direction and will be type N female bulkhead to TNC male cable assembly if the opposite connectivity is required. TNC plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink. |
| 240 | ||
| PE3C2368/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male RA to TNC Male RA Low Loss Cable 60 Inch Length Using LMR-400-DB Coax With Times Microwave Components with Double HeatShrink., Radio frequency assembly TNC male RA to TNC male RA low loss cable 60 inch length using LMR-400-DB coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male RA to TNC male RA low loss cable 60 inch length using LMR-400-DB coax with Times Microwave components with double heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2368/HS2-60 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C2368/HS2-60 is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male RA to TNC male RA low loss cable 60 inch length using LMR-400-DB coax with Times Microwave components with double heatshrink. |
| 8 | ||
| PE345/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Right Angle Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Double HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our low loss type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. PE345/HS2-60 can also be known as a low loss type N plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE345/HS2-60 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE345/HS2-60 can also be used in the other direction and will be right angle N type male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink. |
| 0 | ||
| PE35568/HS2-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to SMB Jack Cable 6 Inch Length Using RG316-DS Coax with Double HeatShrink., Radio frequency assembly SMA male to SMB jack cable 6 inch length using RG316-DS coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMB jack cable 6 inch length using RG316-DS coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB cable connection on the other. Our SMA to SMB cable assembly has male gender on end 1 and jack on end 2. PE35568/HS2-6 can also be known as a SMA plug to SMB female cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to SMB female cable assembly PE35568/HS2-6 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE35568/HS2-6 RF cable are available on our downloadable PDF datasheet.PE35568/HS2-6 can also be used in the other direction and will be SMB jack to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C0051/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to BNC Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMA male to BNC male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 60 inch length using LMR-195 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0051/HS2-60 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051/HS2-60 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 0 | ||
| PE3C1041/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Right Angle Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Double HeatShrink., Radio frequency assembly N male to TNC male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle TNC cable connection on the other. Our low loss type N to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1041/HS2-60 can also be known as a low loss type N plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3C1041/HS2-60 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1041/HS2-60 can also be used in the other direction and will be right angle TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink. |
| 0 | ||
| PE3C1527/HS2-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. BNC Male to BNC Male Cable 6 Inch Length Using RG316-DS Coax with Double HeatShrink., Radio frequency assembly BNC male to BNC male cable 6 inch length using RG316-DS coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to BNC male cable 6 inch length using RG316-DS coax with double heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1527/HS2-6 can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C1527/HS2-6 is built with RG316-DS which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 6 inch length using RG316-DS coax with double heatshrink. |
| 0 | ||
| PE3C1609/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMB Plug to SMA Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMB cable connection on one end and SMA cable connection on the other. Our low loss SMB to SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3C1609/HS2-60 can also be known as a low loss SMB male to SMA plug cable assembly and will be shipped same-day as it is purchased. SMB male to SMA plug cable assembly PE3C1609/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMB plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1609/HS2-60 can also be used in the other direction and will be SMA male to SMB plug cable assembly if the opposite connectivity is required. Low loss SMB male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 0 | ||
| PE3C2887/HS2-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. Mini SMP Female Right Angle to SMA Male Cable 6 Inch Length Using PE-P047 Coax with Double HeatShrink., Radio frequency assembly mini SMP female right angle to SMA male cable 6 inch length using PE-P047 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female right angle to SMA male cable 6 inch length using PE-P047 coax with double heatshrink, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMP cable connection on one end and SMA cable connection on the other. Our right angle mini SMP to SMA cable assemblies have a female gender on end 1 and male on end 2. This mini SMP to SMA cable is a female to male coax assembly, PE3C2887/HS2-6, can also be known as a right angle mini SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMA plug cable assembly PE3C2887/HS2-6 is built with PE-P047 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12 GHz maximum frequency mini SMP right angle female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2887/HS2-6 can also be used in the other direction and will be SMA male to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female right angle to SMA male cable 6 inch length using PE-P047 coax with double heatshrink. |
| 0 | ||
| PE3C6004/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to TNC Male Right Angle Low Loss Cable 60 Inch Length Using LMR-200 Coax with Double HeatShrink., Radio frequency assembly SMA male right angle to TNC male right angle low loss cable 60 inch length using LMR-200 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to TNC male right angle low loss cable 60 inch length using LMR-200 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C6004/HS2-60 can also be known as a low loss right angle SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C6004/HS2-60 is built with LMR-200 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6004/HS2-60 can also be used in the other direction and will be right angle TNC male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC male right angle low loss cable 60 inch length using LMR-200 coax with double heatshrink. |
| 0 | ||
![]() Teledyne HiRel | DM54LS260J/883 | Teledyne HiRel | NOR GATE, DUAL 5-INPUT | 0 | ||
| DM54LS260E/883 | Teledyne HiRel | NOR GATE, DUAL 5-INPUT | 0 | |||
![]() Vyrian | SNJ54AS264FK | Texas Instruments | Look-Ahead Carry Generator, AS Series, 4-Bit, TTL, CQCC20 RoHS : Not Compliant | 9,671 | ||
| SN74AS2623JP4 | Texas Instruments | Bus Driver/Transceiver, 1-Func, 8-Bit, True Output, TTL, CDIP20 RoHS : Not Compliant | 9,161 | |||
| SN54AS2623FH | Texas Instruments | Bus Driver/Transceiver, 1-Func, 8-Bit, True Output, TTL, CQCC20 RoHS : Not Compliant | 8,549 | |||
| SN74AS264NP1 | Texas Instruments | Look-Ahead Carry Generator, TTL, PDIP16 RoHS : Not Compliant | 8,007 | |||
STS26N3LLH6![]() | STMicroelectronics | Power Field-Effect Transistor, 26A I(D), 30V, 0.0053ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 7,746 | |||
| SN74AS2645FN | Texas Instruments | Bus Driver/Transceiver, 1-Func, 8-Bit, True Output, TTL, PQCC20 RoHS : Not Compliant | 7,517 | |||
| SN74AS2623DWP3 | Texas Instruments | Bus Driver/Transceiver, 1-Func, 8-Bit, True Output, TTL, PDSO20 RoHS : Not Compliant | 6,484 | |||
| SN74AS2640DWR | Texas Instruments | Bus Transceiver, AS Series, 1-Func, 8-Bit, Inverted Output, TTL, PDSO20 | 6,412 | |||
| CY8C4146LQS-S263T | Infineon Technologies AG | CMOS RoHS : Compliant | 6,145 | |||
| SN74AS2623DW3 | Texas Instruments | Bus Driver/Transceiver, 1-Func, 8-Bit, True Output, TTL, PDSO20 RoHS : Not Compliant | 5,244 | |||
| SN54S268J | Texas Instruments | D Latch, S Series, 1-Func, High Level Triggered, 6-Bit, True Output, TTL, CDIP16 RoHS : Not Compliant | 5,125 | |||
| SN74AS264D3 | Texas Instruments | Look-Ahead Carry Generator, TTL, PDSO16 RoHS : Not Compliant | 4,721 | |||
SN54LS26J![]() | Texas Instruments | NAND Gate, LS Series, 4-Func, 2-Input, TTL, CDIP14 RoHS : Not Compliant | 3,391 | |||
| SS26V-080350 | KEMET Corporation | Single Phase EMI Filter, 250V | 837 | |||
| MURS260-A | Gulf Semiconductor | Rectifier Diode, 1 Phase, 1 Element, 2A, 600V V(RRM), Silicon, DO-214AC | 369 | |||
![]() Win Source Electronics | MPZ1608S260ATAH0 | TDK Corporation | FERRITE BEAD 26 OHM 0603 1LN RoHS : Compliant |
| 204,000 | |
| TPS26600RHFTG4 | Texas Instruments | TPS26600RHFTG4 Texas Instruments Digital to Analog Converters - DAC 4.2-V to 60-V 150m& Omega; 0.1-2.23A eF datasheet, inventory, & pricing. RoHS : Compliant |
| 58,250 | ||
| SS26HE3_A/H | Vishay Huntington | Diode Schottky 60V 2A Automotive 2-Pin SMB T/R / DIODE SCHOTTKY 60V 2A DO214AA |
| 51,000 | ||
DS26LV32ATM![]() | Texas Instruments | IC LINE RVR CMOS QUAD DIF 16SOIC RoHS : Not Compliant |
| 19,720 | ||
| ISL6545CBZ-TS2694 | Intersil Corporation | IC REG CTRLR BUCK 8SOIC |
| 18,320 | ||
DS26C31TM/NOPB![]() | Texas Instruments | DS26C31T/DS26C31M CMOS Quad TRI-STATE® Differential Line Driver RoHS : Compliant |
| 15,690 | ||
DS26C31TMX/NOPB![]() | Texas Instruments | IC LINE DRIVER QUAD CMOS 16-SOIC RoHS : Compliant |
| 9,490 | ||
| TPS26612DDFR | Texas Instruments | IC CURRENT REGULATOR TSOT23-8 / Current Regulator Regulator TSOT-23-8 RoHS : Compliant |
| 9,013 | ||
DS26C32ATM![]() | Texas Instruments | IC LINE RCVR QUAD CMOS 16-SOIC RoHS : Not Compliant |
| 8,800 | ||
DS26C32ATMX![]() | Texas Instruments | IC LINE RCVR QUAD CMOS 16-SOIC RoHS : Not Compliant |
| 8,180 | ||
| TPS26613DDFR | Texas Instruments | IC CURRENT REGULATOR TSOT23-8 / Current Regulator Regulator Low-Side 20mA TSOT-23-8 RoHS : Compliant |
| 8,130 | ||
DS26C32ATM/NOPB![]() | Texas Instruments | IC LINE RCVR QUAD CMOS 16-SOIC RoHS : Compliant |
| 7,980 | ||
DS26LS31CMX![]() | Texas Instruments | IC DRIVER 4/0 16SOIC / 4/0 Driver RS422, RS485 16-SOIC RoHS : Not Compliant |
| 6,800 | ||
| SISS26LDN-T1-GE3 | Vishay Huntington |
| 4,782 | |||
| TPS26601RHF | Texas Instruments | Hot Swap Voltage Controllers |
| 3,680 | ||
![]() Wuhan P&S | SS26HE3_A/H | Vishay Intertechnologies | Schottky Barrier Rectifier,2A,60V RoHS : Compliant |
| 19,500 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |