W2XT-2V2V3-M2SLASHQSLASHN datasheet(2/5 Pages) MSYSTEM

2 / 5 page

MODEL: W2XT

W2XT SPECIFICATIONS

ES-5508 Rev.6 Page 2/5

http://www.m-system.co.jp/

/SET: Preset according to the Ordering Information Sheet

(No. ESU-5508)

RELATED PRODUCTS

• PC configurator software (model: W2CFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output 1 to output 2 to power

Overrange output: -15 to +115 %

(Negative current output is not available.)

Zero adjustment: -5 to +5 % (PC programming)

Span adjustment: 95 to 105 % (PC programming)

Burnout: Upscale standard; downscale, specific value output

or no burnout optional by programming

Linearization: Standard

Cold junction compensation: CJC sensor attached to the

input terminals

Status indicator LED: Tri-color (green/amber/red) LED;

Blinking patterns indicate operation status of the

transmitter.

Programming: Downloaded from PC; input type and range,

output type and range, zero and span, burnout type, user’s

linearization table, etc.

For detailed information, refer to the users manual for the

PC configurator.

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

INPUT SPECIFICATIONS

Input resistance: 1 MΩ min.

Burnout sensing: ≤ 4 μA

If not specified, the input range is shown below.

1 PR: 0–1600°C

2 K: 0–1000°C

3 E: 0–500°C

4 J: 0–500°C

5 T: 0–300°C

6 B: 500–1600°C

7 R: 500–1600°C

8 S: 0–1600°C

9 C (WRe 5-26): 0–2000°C

N N: 0–1000°C

U U: 0–300°C

L L: 0–500°C

P Platinel II: 0–1200°C

OUTPUT SPECIFICATIONS

■ DC Current

Operational range: 0 – 23 mA DC

Minimum span: 1 mA

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

Load resistance: Output drive 12 V max. for Output 1; 7 V

max. for Output 2

(e.g. 4 – 20 mA: 600 Ω [12 V ÷ 20 mA])

If not specified, the output range is 4 – 20 mA DC.

■ DC Voltage

Code V2 (wide spans)

Operational range: -11.5 – +11.5 V DC

Minimum span: 1 V

Code V3 (narrow spans)

Operational range: -6 – +6 V DC

Minimum span: 0.5 V

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

Load resistance: Output drive 1 mA max.

(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])

If not specified, the output range is shown below.

V2: 0 – 10 V DC

V3: 1 – 5 V DC

INSTALLATION

Power Consumption

•AC:

Approx. 5 VA at 100 V

Approx. 6 VA at 200 V

Approx. 7 VA at 240 V

•DC: Approx. 3 W

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 150 g (0.33 lb)

PERFORMANCE in percentage of span

Overall accuracy: Input accuracy + output accuracy

• Input accuracy: Accuracy (Table 1) + Cold Junction

Compensation Error 3°C (5.4°F)

• Output accuracy: Max. Output Range ÷ Span × ±0.04%

Cold junction compensation error:

±3°C at 25 ±10°C

W2XT-2V2V3-M2/Q/N Datasheet(PDF) 2 Page - M-System Co.,Ltd.

W2XT-2V2V3-M2/Q/N Datasheet(HTML) 2 Page - M-System Co.,Ltd.

Html Pages

1 2 3 4 5

Datasheet Download

Link URL