Specifications

D SUBMINIATURE CONNECTOR J SERIES

• Series name

• Shell size: E, A, B ,C

• Wire connection style: Y... Right angle through-hole style

• Number of circuits: 9, 15, 25, 37

• Connector type: P ... Plug,

S ... Socket

• Connector construction/Dimensions: Standard J series

• Types of grounding adapters: 0 ... Without grounding adapters

1 ... With grounding adapters having a 3.2 mm dia. hole

2 ... With grounding adapters having an M3 thread

3 ... With grounding adapters having a spring lock device (1)

4 ... With grounding adapters having a spring lock device (2)

• Types of lock screw blocks: A ... With hexagonal lock screw blocks having a No. 4-40UNC inch thread

B ... With hexagonal lock screw blocks having an M2.6 thread

C ... With rectangular lock screw blocks having an M2.6 thread

D ... Without lock screw blocks

E ... Without lock screw blocks, but with grounding adapters having a 3.05 mm dia. hole

F ... Without lock screw blocks, but with grounding adapters having a No. 4-40UNC inch thread

G ... Without lock screw blocks, but with grounding adapters having an M2.6 thread

H ... Without lock screw blocks, but with grounding adapters having an M3 thread

• Finish: Blank ... Gold-plated (flash)

13 ... 0.4 micron gold-plated

14 ... 0.76 micron gold-plated

90 ... Tin-plated (reflow treatment)

• Bail locks: Blank...Without bail locks

S or S1...With bail locks        S2...With bail locks (with addition of spring characteristic) 

S5...With bail locks (with addition of spring characteristic, straight oval type)

J

E

Y - 9

S - 1A

3

A

14

S1

Part name

Material and Finish

Contact

Insulator

Shell

Heaxagonal lock screw block

Rectangular lock screw block

Grounding adapter having a 3.2 mm dia. hole

Grounding adapter having an M3 tapped hole

Grounding adapter having a spring lock lever

Spring lock

Plug

Socket

Bail lock

Accepts bail lock

Brass, gold-plated product: Nickel-undercoated,

Mating part; gold-plated

Solder tail; tin-plated (reflow treatment)

tin-plated product: Copper-undercoated,

tin-plated (reflow treatment)

Phosphor bronze, gold-plated product: Nickel-undercoated,

Mating part; gold-plated

Solder tail; tin-plated (reflow treatment)

tin-plated product: Copper-undercoated,

tin-plated (reflow treatment)

Glass-filled PBT, UL94V-0, black

Steel, copper-undercoated, nickel-plated

Steel, copper-undercoated, nickel-plated

Zinc, copper-undercoated, nickel-plated

Steel, copper-undercoated, nickel-plated

Brass, nickel-undercoated, tin/copper alloy-plated

Stainless steel

3 A AC/DC (2 A AC/DC for 37 circuits)

250 V AC/DC

-40̊C to +85̊C

(including temperature rise in applying electrical current)

Initial value/ 15 mΩ max.

After environmental tests/ 30 mΩ max.

5,000 MΩ min.

1,000 VAC/minute

1.6 mm

Current rating

Voltage rating

Temperature range

Contact resistance

Insulation resistance

Withstanding voltage

Applicable

PC board thickness

4

Model number identification

Materials

Characteristics

Note: Contact JST for details.

Note: 1. The relationship between number of circuits and shell size is shown below.

9: E, 15: A, 25: B, 37: C

2. Contact JST for special plating requirements.

3. Contact JST for the Socket with bail locks. (Not UL/CSA approved.)

Standards

Recognized E60389

Certified LR20812

* Refer to "General Instruction and Notice when using

Terminals and Connectors" at the end of this catalog.

* Contact JST for details.

* RoHS2 compliance