STM32F412REY7P datasheet(39/201 Pages) STMICROELECTRONICS

39 / 201 page

DocID028087 Rev 7

39/201

STM32F412xE/G

Functional overview

The DFSDM peripheral supports:

•

4 multiplexed input digital serial channels:

–

configurable SPI interface to connect various SD modulator(s)

–

configurable Manchester coded 1 wire interface support

–

PDM (Pulse Density Modulation) microphone input support

–

maximum input clock frequency up to 20 MHz (10 MHz for Manchester coding)

–

clock output for SD modulator(s): 0...20 MHz

•

alternative inputs from 4 internal digital parallel channels (up to 16 bit input resolution):

–

internal sources: device memory data streams (DMA)

•

2 digital filter modules with adjustable digital signal processing:

–Sincx filter: filter order/type (1...5), oversampling ratio (up to 1...1024)

–

integrator: oversampling ratio (1...256)

•

up to 24-bit output data resolution, signed output data format

•

automatic data offset correction (offset stored in register by user)

•

continuous or single conversion

•

start-of-conversion triggered by

–

software trigger

–

internal timers

–

external events

–

start-of-conversion synchronously with first digital filter module (DFSDM1FLT0)

•

analog watchdog feature:

–

low value and high value data threshold registers

–

dedicated configurable Sincx digital filter (order = 1...3, oversampling ratio = 1...32

–

input from digital output data or from selected input digital serial channels

–

continuous monitoring independently from standard conversion

•

short circuit detector to detect saturated analog input values (bottom and top range):

–

up to 8-bit counter to detect 1...256 consecutive 0’s or 1’s on serial data stream

–

monitoring continuously each input serial channel

•

break signal generation on analog watchdog event or on short circuit detector event

•

extremes detector:

–

storage of minimum and maximum values of final conversion data

–

refreshed by software

•

DMA capability to read the final conversion data

•

interrupts: end of conversion, overrun, analog watchdog, short circuit input serial

channel clock absence

•

“regulator” or injected” conversions:

–

“regular” conversions can be requested at any time or even in continuous mode

without having any impact on the timing of “injected” conversions

–

“injected” conversions for precise timing and with high conversion priority.

STM32F412REY7P Datasheet(PDF) 39 Page - STMicroelectronics

STM32F412REY7P Datasheet(HTML) 39 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL