FTRJ1421P1xCL Pluggable SFP Product Specification – December 2003

F i n i s a r

 Finisar Corporation December 16, 2003 Rev G

Page 5

V.

General Specifications

Parameter

Symbol

Min

Typ

Max

Units

Ref.

Data Rate

BR

155

2667

Mb/sec 1

Bit Error Rate @ OC-48

BER

2

Max. Supported Link Length on

9/125

µm SMF @ OC-48

20

km

3

Max. Supported Link Length on

9/125

µm SMF @ 2X Fibre Channel

30

km

3

Max. Supported Link Length on

9/125

µm SMF @ Gigabit Ethernet

30

km

3

Max. Supported Link Length on

9/125

µm SMF @ OC-12

30

km

3

Max. Supported Link Length on

9/125

µm SMF @ OC-3

30

km

3

Notes:

1. SONET OC-48 IR-1/SDH STM S-16.1, Gigabit Ethernet and 1x/2x Fibre Channel compliant.

Compatible with SONET OC-12 and OC-3. Supports FEC at 2.67Gb/s.

3. Attenuation of 0.55 dB/km is used for the link length calculations (per GR-253 CORE). Distances are

indicative only. Please refer to the Optical Specifications in Table IV to calculate a more accurate link

budget based on specific conditions in your application.

VI.

Environmental Specifications

Finisar 1310nm SFP transceivers have an extended operating temperature range from

–10°C to +70°C case temperature.

Parameter

Symbol

Min

Typ

Max

Units

Ref.

Case Operating Temperature

-10

70

°C

Storage Temperature

-40

85

°C

VII.

Regulatory Compliance

Finisar transceivers are Class 1 Laser Products and comply with US FDA regulations.

These products are certified by TÜV and CSA to meet the Class 1 eye safety

requirements of EN (IEC) 60825 and the electrical safety requirements of

EN (IEC) 60950. Copies of certificates are available at Finisar Corporation upon request.