For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

7

7 - 58

Item

Description

J1 - J2

PCB Mount SMA RF Connector

J3 - J4

DC Pin

C1

10000 pF Capacitor, 0402 Pkg.

C2

10000 pF Capacitor, 0060 Pkg.

L1

22nH Inductor, 0402 Pkg.

L2

18nH Inductor, 0603 Pkg.

U1

HMC372LP3 / HMC372LP3E Amplifier

106722 Evaluation PCB

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

Evaluation PCB

The circuit board used in the application should use

RF circuit design techniques. Signal lines should

have 50 Ohm impedance while the package ground

leads and exposed paddle should be connected

directly to the ground plane similar to that shown.

A sufficient number of via holes should be used to

connect the top and bottom ground planes. The

evaluation circuit board shown is available from

Hittite upon request.

GaAs PHEMT MMIC LOW NOISE

AMPLIFIER, 700 - 1000 MHz

v03.0610