STM32F401CCU6 datasheet(58/135 Pages) STMICROELECTRONICS

58 / 135 page

DocID024738 Rev 6

58/135

STM32F401xB STM32F401xC

Electrical characteristics

113

Table 12. Current characteristics

Symbol

Ratings

Max.

Unit

ΣIVDD

Total current into sum of all VDD_x power lines (source)(1)

160

Σ IVSS

Total current out of sum of all VSS_x ground lines (sink)(1)

-160

IVDD

Maximum current into each VDD_x power line (source)(1)

100

IVSS

Maximum current out of each VSS_x ground line (sink)(1)

-100

IIO

Output current sunk by any I/O and control pin

Output current sourced by any I/O and control pin

-25

ΣIIO

Total output current sunk by sum of all I/O and control pins (2)

120

Total output current sourced by sum of all I/Os and control pins(2)

-120

IINJ(PIN) (3)

Injected current on FT pins (4)

–5/+0

Injected current on NRST and B pins (4)

ΣIINJ(PIN)

Total injected current (sum of all I/O and control pins)(5)

±25

1. All main power (VDD, VDDA) and ground (VSS, VSSA) pins must always be connected to the external power supply, in the

permitted range.

2. This current consumption must be correctly distributed over all I/Os and control pins. The total output current must not be

sunk/sourced between two consecutive power supply pins referring to high pin count LQFP packages.

3. Negative injection disturbs the analog performance of the device. See note in Section 6.3.20: 12-bit ADC characteristics.

4. Positive injection is not possible on these I/Os and does not occur for input voltages lower than the specified maximum

value.

5. When several inputs are submitted to a current injection, the maximum

ΣIINJ(PIN) is the absolute sum of the positive and

negative injected currents (instantaneous values).

Table 13. Thermal characteristics

Symbol

Ratings

Value

Unit

TSTG

Storage temperature range

–65 to +150

°C

Maximum junction temperature

125

TLEAD

Maximum lead temperature during soldering

(WLCSP49, LQFP64/100, UFQFPN48,

UFBGA100)

see note (1)

1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb assembly), the ST ECOPACK®

7191395 specification, and the European directive on Restrictions on Hazardous Substances (ROHS

directive 2011/65/EU, July 2011).

STM32F401CCU6 Datasheet(PDF) 58 Page - STMicroelectronics

STM32F401CCU6 Datasheet(HTML) 58 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL