THR-DS-TFLEX-700_07_2_14

Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility

for the use and application of Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies

makes no warranties as to the fitness, merchantability or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be

liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from

time to time, a copy of which will be furnished upon request. © Copyright 2010 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo,

and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of

third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights. A15955-00 Rev E, 7/2014.

STANDARD THICKNESSES

Standard thickness 0.020” (0.5mm) through 0.200” (5.0mm)

available in 0.010” (0.25mm) increments.

MATERIAL NAME AND THICKNESS

Tflex™ - indicates elastomeric gap filler product line.

7XXX - indicates Tflex™ 700 product line and thickness in mils (0.001-inches).

-DC1 - one side tacky; default is both sides tacky.

Data for design engineer guidance only. Observed performance varies in application.

Engineers are reminded to test the material in application.

Tflex™ 700

TEST METHOD

Construction

Filled Silicone Sheet

N/A

Color

Dark Grey

Visual

Thermal Conductivity (W/mK)

5.0

Hot Disk™

Hardness (Shore 00)

66; 3

ASTM D2240

Specific Gravity

1.73

Helium Pyncometer

Thickness Range

0.020” - .200” (0.5 - 5.0mm)

Thickness Tolerance

±10%

UL Flammability Rating

94 V0

File E180840

Temperature Range

-45°C to 200°C

See reliability report

Volume Resistivity (ohm-cm)

ASTM D257

Outgassing TML

1.0%

ASTM E595

Outgassing CVCM

0.13%

ASTM E595

Thermal Gap Filler