M48T212V-85MH1E datasheet(5/35 Pages) STMICROELECTRONICS

5 / 35 page

M48T212V

Description

5/35

Description

The M48T212V is a self-contained device that includes a real-time clock (RTC),

programmable alarms, a watchdog timer, and two external chip enable outputs which

provide control of up to four (two in parallel) external low-power static RAMs.

Access to all TIMEKEEPER® functions and the external RAM is the same as conventional

byte-wide SRAM. The 16 TIMEKEEPER Registers offer Century, Year, Month, Date, Day,

Hour, Minute, Second, Calibration, Alarm, Watchdog, and Flags. Externally attached static

RAMs are controlled by the M48T212V via the E1CON and E2CON signals (see Table 3 on

page 10).

The 44-pin, 330mil SOIC provides sockets with gold plated contacts at both ends for direct

connection to a separate SNAPHAT® housing containing the battery and crystal. The

unique design allows the SNAPHAT battery package to be mounted on top of the SOIC

package after the completion of the surface mount process.

Insertion of the SNAPHAT housing after reflow prevents potential battery and crystal

damage due to the high temperatures required for device surface-mounting. The SNAPHAT

housing is keyed to prevent reverse insertion.

The SOIC and battery/crystal packages are shipped separately in plastic anti-static tubes or

in Tape & Reel form. For the-44 lead SOIC, the battery/crystal package (e.g., SNAPHAT)

part number is “M4TXX-BR12SH” (see Table 20 on page 33).

Caution:

Do not place the SNAPHAT battery/crystal top in conductive foam, as this will drain the

lithium button-cell battery.

Figure 1.

Logic diagram

AI03019

A0-A3

DQ0-DQ7

VCC

M48T212V

VSS

E2CON

E1CON

RSTIN2

RSTIN1

RST

IRQ/FT

VOUT

WDI

VCCSW

M48T212V-85MH1E Datasheet(PDF) 5 Page - STMicroelectronics

M48T212V-85MH1E Datasheet(HTML) 5 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Datasheet Download

Link URL