| Electronic Components Datasheet Search |
|
TMS320C28343ZFEQ Datasheet(PDF) 39 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TMS320C28343ZFEQ Datasheet(HTML) 39 Page - Texas Instruments |
|
39 / 170 page ![]() TMS320C28346, TMS320C28345, TMS320C28344 TMS320C28343, TMS320C28342, TMS320C28341 www.ti.com SPRS516D – MARCH 2009 – REVISED AUGUST 2012 Peripheral Frame 1, Peripheral Frame 2, and Peripheral Frame 3 are grouped together to enable these blocks to be write/read peripheral block protected. The protected mode ensures that all accesses to these blocks happen as written. Because of the C28x pipeline, a write immediately followed by a read, to different memory locations, will appear in reverse order on the memory bus of the CPU. This can cause problems in certain peripheral applications where the user expected the write to occur first (as written). The C28x CPU supports a block protection mode where a region of memory can be protected so as to make sure that operations occur as written (the penalty is extra cycles are added to align the operations). This mode is programmable and by default, it will protect the selected zones. The wait-states for the various spaces in the memory map area are listed in Table 3-1. Table 3-1. Wait-states WAIT-STATES WAIT-STATES AREA COMMENTS (CPU) (DMA)(1) M0 and M1 SARAMs 0-wait No access Fixed Peripheral Frame 0 0-wait (writes) No access (writes) 1-wait (reads) 0-wait (reads) Peripheral Frame 3 0-wait (writes) 0-wait (writes) Assumes no conflicts between CPU and DMA. 2-wait (reads) 1-wait (reads) Peripheral Frame 1 0-wait (writes) Cycles can be extended by peripheral generated ready. No access 2-wait (reads) Consecutive writes to the CAN will experience a 1-cycle pipeline hit. Peripheral Frame 2 0-wait (writes) Fixed. Cycles cannot be extended by the peripheral. No access 2-wait (reads) L0 SARAM 0-wait data and Assumes no CPU conflicts program L1 SARAM L2 SARAM L3 SARAM L4 SARAM 1-wait Assumes no conflicts between CPU and DMA L5 SARAM L6 SARAM 1-wait L7 SARAM XINTF Programmable Programmed via the XTIMING registers or extendable via external XREADY signal. 1-wait minimum 1-wait is minimum wait states allowed on external waveforms for both reads and writes on XINTF. 0-wait minimum writes 0-wait data (write) 0-wait minimum for writes assumes write buffer enabled and with write buffer 0-wait data (read) not full. enabled Assumes no conflicts between CPU and DMA. When DMA and CPU attempt simultaneous conflict, 1-cycle delay is added for arbitration. H0 SARAM 1-wait A program-access prefetch mechanism is enabled on these memories to improve instruction fetch performance for linear H1 SARAM code execution. H2 SARAM No access H3 SARAM H4 SARAM H5 SARAM Boot-ROM 1-wait No access (1) The DMA has a base of 4 cycles/word. Copyright © 2009–2012, Texas Instruments Incorporated Functional Overview 39 Submit Documentation Feedback Product Folder Link(s): TMS320C28346, TMS320C28345, TMS320C28344 TMS320C28343, TMS320C28342, TMS320C28341 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |