1. Product Identification & General Information

️· Product Type: Laser Diode
️· Document Version: Version 1.1 SPL 2F94-2S
️· Publisher: OSRAM Opto Semiconductors GmbH
️· Website: [www.osram-os.com](http://www.osram-os.com)
️· Important Notes: English language prevails in case of discrepancies, design changes are reserved.

2. Electrical & Optical Characteristics

️· Wavelength: 9xx nm (standard; other wavelengths in the 780 nm - 980 nm range available on request)
️· Output Power: Specified at standard operating conditions (see Glossary for details). Operation at maximum ratings affects lifespan.
️· Optical Data: Refers to output from a fiber stub (core Ø 200 µm, 0.22 NA).
️· Operating and Storage Temperature: Must avoid condensation/dew.
️· Standard Operating Conditions: 1.5W cw optical output power; Multimode fiber (core Ø 200 µm, 0.22 NA)
️· Output power measurement: Measured using an integrating sphere

3. Environmental & Mechanical Considerations

️· Operating Temperature: (Specific range not explicitly provided, but referenced as critical).
️· Storage Temperature: (Specific range not explicitly provided).
️· Packaging & Recycling: OSRAM encourages recycling and may accept packing material back by agreement (customer bears transport costs).
️· Life Support Devices: Components used in life-support devices *require express written approval* from OSRAM. Definition of a 'critical component' and 'life support devices' is provided.

4. Mechanical Dimensions & Soldering

️· TTW Soldering: Provides a TTW (Time-Temperature Profile for Wave Soldering) profile for proper soldering.
️· Dimensions: Detailed mechanical dimensions are shown in a diagram (not transcribed here due to complexity - refer to original document). Dimensions are in mm (inch).
️· Pin Identification:
- 1 - Cathode
- 2 - NTC (Negative Temperature Coefficient)
- 3 - NTC

5. Glossary of Terms

️· Wavelength: Explanation of available wavelength range.
️· Output power: Explanation of conditions of measurement
️· Output power: Explanation of measurement from Fiber stub
️· Operating and Storage Temperature: Explanation of requirement to avoid Condensation
️· Standard Operating conditions: Explanation of conditions used for measurement.
️· Output power: Explanation of methodology.

6. Important Disclaimer

️· The datasheet describes the *type* of component and does not guarantee specific characteristics.
️· Terms of delivery and rights to change design are reserved.