| Electronic Components Datasheet Search |
|
PIC16F628-20/SS Datasheet(PDF) 91 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC16F628-20/SS Datasheet(HTML) 91 Page - Microchip Technology |
|
91 / 160 page ![]() PIC16F62X © 1999 Microchip Technology Inc. Preliminary DS40300B-page 91 13.0 DATA EEPROM MEMORY The EEPROM data memory is readable and writable during normal operation (full VDD range). This memory is not directly mapped in the register file space. Instead it is indirectly addressed through the Special Function Registers. There are four SFRs used to read and write this memory. These registers are: • EECON1 • EECON2 (Not a physically implemented register) • EEDATA • EEADR EEDATA holds the 8-bit data for read/write, and EEADR holds the address of the EEPROM location being accessed. PIC16F62X devices have 128 bytes of data EEPROM with an address range from 0h to 7Fh. The EEPROM data memory allows byte read and write. A byte write automatically erases the location and writes the new data (erase before write). The EEPROM data memory is rated for high erase/write cycles. The write time is controlled by an on-chip timer. The write- time will vary with voltage and temperature as well as from chip to chip. Please refer to AC specifications for exact limits. When the device is code protected, the CPU may continue to read and write the data EEPROM memory. The device programmer can no longer access this memory. Additional information on the Data EEPROM is avail- able in the PICmicro™ Mid-Range Reference Manual, (DS33023). REGISTER 13-1: EEADR REGISTER (ADDRESS 9Bh) 13.1 EEADR The EEADR register can address up to a maximum of 256 bytes of data EEPROM. Only the first 128 bytes of data EEPROM are implemented and only seven of the eight bits in the register (EEADR<6:0>) are required. The upper bit is address decoded. This means that this bit should always be ’0’ to ensure that the address is in the 128 byte memory space. U R/W R/W R/W R/W R/W R/W R/W — EADR6 EADR5 EADR4 EADR3 EADR2 EADR1 EADR0 R = Readable bit W = Writable bit S = Settable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR reset bit7 bit0 bit 7 Unimplemented Address: Must be set to '0' bit 6:0 EEADR: Specifies one of 128 locations for EEPROM Read/Write Operation |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |