| Electronic Components Datasheet Search |
|
LQFP64 Datasheet(PDF) 50 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
LQFP64 Datasheet(HTML) 50 Page - STMicroelectronics |
|
50 / 103 page ![]() Electrical characteristics SPC560P34L1, SPC560P34L3, SPC560P40L1, SPC560P40L3 50/103 Doc ID 16100 Rev 7 Figure 8 shows the constraints of the different power supplies. VDD_HV_REG SR 3.3 V voltage regulator supply voltage —3.0 3.6 V Relative to VDD_HV_IOx VDD_HV_IOx –0.1 VDD_HV_IOx +0.1 VDD_HV_ADC0 SR 3.3 V ADC_0 supply and high reference voltage —3.0 5.5 V Relative to VDD_HV_REG VDD_HV_REG − 0.1 5.5 VSS_HV_ADC0 SR ADC_0 ground and low reference voltage —0 0 V VDD_LV_REGCOR (3) ,(4) CC Internal supply voltage — — — V VSS_LV_REGCOR (3) SR Internal reference voltage —0 0 V VDD_LV_CORx (3),(4) CC Internal supply voltage — — — V VSS_LV_CORx (3) SR Internal reference voltage —0 0 V TA SR Ambient temperature under bias fCPU =60MHz −40 125 °C fCPU =64MHz −40 105 °C 1. Full functionality cannot be guaranteed when voltage drops below 3.0 V. In particular, ADC electrical characteristics and I/Os DC electrical specification may not be guaranteed. 2. The difference between each couple of voltage supplies must be less than 100 mV, ⏐V DD_HV_IOy – VDD_HV_IOx ⏐ < 100 mV. 3. To be connected to emitter of external NPN. Low voltage supplies are not under user control—they are produced by an on- chip voltage regulator—but for the device to function properly the low voltage grounds (VSS_LV_xxx) must be shorted to high voltage grounds (VSS_HV_xxx) and the low voltage supply pins (VDD_LV_xxx) must be connected to the external ballast emitter. 4. The low voltage supplies (VDD_LV_xxx) are not all independent. – VDD_LV_COR1 and VDD_LV_COR2 are shorted internally via double bonding connections with lines that provide the low voltage supply to the data flash memory module. Similarly, VSS_LV_COR1 and VSS_LV_COR2 are internally shorted. – VDD_LV_REGCOR and VDD_LV_RECORx are physically shorted internally, as are VSS_LV_REGCOR and VSS_LV_CORx. Table 11. Recommended operating conditions (3.3 V) (continued) Symbol Parameter Conditions Value Unit Min Max(1) |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |