PSD413A2 datasheet(20/123 Pages) STMICROELECTRONICS

20 / 123 page

PSD4XX Family

9.1.1.4 Port B Macrocell Structure

Figure 7 shows the PB Macrocell block, which consists of 8 identical macrocells. Each

macrocell output can be connected to its own I/O pin on Port B. The two inputs, CLKIN and

MACRO-RST, are used as clock and clear inputs to all the macrocells. The CLKIN comes

directly from the CLKIN input pin. The MACRO-RST is the same as the Reset input pin

except it is user configurable.

The circuit of a PB Macrocell is shown in Figure 8. There are 10 product terms from the

GPLDs AND ARRAY as inputs to the macrocell. Users can select the polarity of the output,

and configure the macrocell to operate as:

t Registered Output

Select output from D flip flop.

t Combinatorial Output

Select output from OR gate.

t GPLD Input

Use Port B pin as dedicated input.

t GPLD Output

Use Port B pin as dedicated output.

t GPLD I/O

Use Port B pin as bidirectional pin.

t Macrocell Feedback

combinatorial output, to possibly expand the number of product terms available to

another macrocell.

In case of "Buried Feedback", where the output of the macrocell is not connected to

a Port B pin, Port B can be configured to perform other user defined I/O functions.

Each D flip flop in the macrocells has its own dedicated asynchronous clear, preset and

clock input. The signals are defined as follow:

t PRESET

Active only if defined by a product term (PBi.PR)

t CLEAR

Two selectable inputs: Reset input and/or user defined product term (PBi.RE)

t CLK

Two selectable inputs – CLKIN input or user defined product term (PBi.CLK).

The macrocell is operated in Synchronous Mode if the clock input is CLKIN, and is in

Asynchronous Mode if the clock is a product-term clock defined by the user.

Figure 9 shows the input/output path of a PB macrocell to the Port pin with which it is

associated. If the Port pin is specified as a PB output pin in the PSDsoft, the MUX in the I/O

Port Cell selects the PB Macrocell as an output of the Port pin. The output enable signal to

the buffer in the I/O cell can be controlled by a product term from the AND Array.

If the Port pin is specified as a ZPLD input pin, the MUX in the PB Macrocell selects the

Port input signal to be one of the 61 signals in the ZPLD Input Bus.

9.0

The PSD4XX

Architecture

(cont.)

PSD413A2 Datasheet(PDF) 20 Page - STMicroelectronics

PSD413A2 Datasheet(HTML) 20 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL