TSI721 datasheet(6/67 Pages) RENESAS

6 / 67 page

Tsi721 Datasheet

April 4, 2016

Integrated Device Technology

About this Document

Topics discussed include the following:

• Overview

• Document Conventions

• Revision History

Overview

The Tsi721 Datasheet provides signal, electrical, and packaging information about the Tsi721. It is intended for hardware

engineers who are designing system interconnect applications with the device.

Document Conventions

This document uses the following conventions.

Non-differential Signal Notation

Non-differential signals are either active-low or active-high. An active-low signal has an active state of logic 0 (or the lower

voltage level), and is denoted by a lowercase “n”. An active-high signal has an active state of logic 1 (or the higher voltage

level), and is not denoted by a special character. The following table illustrates the non-differential signal naming convention.

Differential Signal Notation

Differential signals consist of pairs of complement positive and negative signals that are measured at the same time to

determine a signal’s active or inactive state (they are denoted by “_p” and “_n”, respectively). The following table illustrates the

differential signal naming convention.

State

Single-line signal

Multi-line signal

Active low

NAMEn

NAMEn[3]

Active high

NAME

NAME[3]

State

Single-line signal

Multi-line signal

Inactive

NAME_p = 0

NAME_n = 1

NAME_p[3] = 0

NAME_n[3] = 1

Active

NAME_p = 1

NAME_n = 0

NAME_p[3] is 1

NAME_n[3] is 0

TSI721 Datasheet(PDF) 6 Page - Renesas Technology Corp

TSI721 Datasheet(HTML) 6 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67

Datasheet Download

Link URL